Warne Maxima Scope Mounting Bases2-Piece and 1-Piece Steel Weaver Style Scope Bases  Warne Maxima Scope Mounting Bases are rigidly strong and perfectly aligned. They attached firmly with Torx screws, too. Specially made to fit Warne Maxima Rings,...

  This Breech Cleaning Brush is for cleaing up the threads around the removable breech plug. It’s long enough to reach into the threads in the barrel/receiver as well. For more Muzzle Loading Accessories Click Here!

TechSights 200 Sight Set for Ruger 10/22   The TechSights 200 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the...

  The TechSights 100 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the front, and approximately 7.5" more sight...

Dead Center BulletsMuzzleloaders are limited in velocity by the physics of the gun and the limitations of the components. The only place left to increase performance is through bullet design... Introducing the Dead Center Bullet. Dead Centers are...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

X-Ring TacSol Compensator fits Ruger 10/22 and X-Ring .22 RiflesMuzzle Brake specially made to fit 10/22, .920"  barrels with threaded end (1/2 X 28" Threads). Also referred to as a compensator. Advanced 360 degree ports steady the muzzle so you can...

Original TC Encore Keylock Scope Base- Weaver style, fits TC Encore and Pro Hunter barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions).  Take...

 Mil Spec Picatinny Ruger 10/22 Scope Mount. This Tactical Ruger 10/22 mount is precision machined to meet Mil Spec Picatinny (Weaver style) dimensions, mounts with four screws (included) and is finished matte black. You'll need a good set of rings....

    Ruger 10/22 Scope Mount with 15 MOA inclination extends the range of your Ruger 10/22 by putting 15 minutes of angle (inclination) into your scope adjustment. This enhances the elevation adjustment of your scope so that you can zero your...

Oversized Ruger 10/22 Bolt Handle Assembly This is a standard weight oversized bolt handle assembly for the Ruger 10/22 to be used when firing 22LR ammunition. Oversized handle is much easier to grip than factory handle and looks nicer...

Tactical Solutions X-Ring Ruger 10/22 Barrel A Chromoly Steel Barrel is sleeved in .920 diameter aluminum and fluted...   This gives heavy barrel stiffness with significantly less weight, and retains a nice balance for aiming and shooting...

Tactical Solutions Ruger 10/22 Barrel 16.5" Matte Black Threaded A light weight Ruger 10/22 barrel with chromoly bore and .920 dia aluminum sleeve. This gives heavy barrel stiffness with reduced weight but, it retains a nice balance for aiming and...

TacSol X-Ring Ruger 10/22 .920" CompensatorThe advanced design offers 360 degree ports which steadies the muzzle so you can watch your hits and get back on target fast during rapid fire.  Fits pre-threaded 10/22 barrel...

Tactical Solutions 1022EMR-MOD Extended Magazine Release fits Ruger 10/22 Matte Olive Drab- Lever action magazine release for the Ruger 10/22. Replaces factory magazine release and gives super leverage for easy magazine drop and re-insertion. Ruger and...

Tactical Solutions 1022EMR-MB Extended Magazine Release fits Ruger 10/22 Matte Black- This sleek looking lever action magazine release for the Ruger 10/22 replaces the factory magazine release and gives super leverage for easy magazine drop and...

Ruger 10/22 Magazine- ClearFits the Ruger 10/22 rifle. These are special edition clear plastic Ruger factory magazines with the rotary mechanism. Each magazine holds 10 rounds of .22LR ammo and fits flush with the bottom of the Ruger 10/22 action. We...

Ruger 10/22® Magazine- Black- Fits the Ruger 10/22 rifle. These are original black plastic Ruger factory magazines with the rotary mechanism. Each magazine holds 10 rounds of .22LR ammo and fits flush with the bottom of the Ruger 10/22 action. We...