Blog
Custom Installed Muzzle Brakes FAQ
Muzzle Brakes with an Emphasis on Accuracy, Functionality and Value.
…
Apr 5th 2023
Why Choose EABCO Accuracy Barrels?
With so many choices, folks
will often ask what we recommend as the "Best Cartridge". Unfortunately
what's best for one situation is not best for another. For example, 6mm
PPC has won more Benchrest Shooting Competitions than any other
cartridge (I think)... so it should be considered as among the most
accurate cartridges in the world. But it's a little light for deer
hunting. As a contrast, our EABCO 308 Winchester chambering is what the
US Rifle team used at the Bisley matches in
…
Apr 4th 2023
AR10 Compatibilities: Fitting Barrels, Bolts and BCGs to DPMS 308/7.2 NATO Rifles
Unlike the AR15 guns that all conform to a "milspec" standard, the
larger frame "AR10" guns are different and we need to know what works. To
begin with, "AR10" is the name of the 308 gun made by Armalite. It's
not correct to refer to DPMS 308s as "AR10". The DPMS guns are actually
named LR-308. In spite of this, most people refer to all 308 sized guns
as "AR10" regardless of which manufacturer's platform they're compatible
with. Ballistic Advantage "AR10" barrels are actually DP
…
Apr 4th 2023
Why I Hate Borescopes
Every now and then a well meaning customer will call or email us saying he's got a bore scope and he's seeing something disturbing in the new barrel we made for him. It's usually just a tool mark, burr, or discoloration. But for liability reasons, we have to take the customer seriously. We don't know if the customer knows what he's looking at... It could be a barrel obstruction. We can't give any assurances over the phone or email so he has to send it in. We check it and sure enough its just a t
…
Apr 4th 2023
EABCO Scope Mounts with our 7th Screw
The Myth: Some people think our 7th Screw concept is for adjusting MOA in our scope bases.The Facts:
Quite the contrary. The 7th Screw concept is part of our rigidity and
straightness that we've been building for T/C Encore Pro Hunter for 20
years. Our mounts are thicker to resist bending and/or warping. They are
totally machined (not castings or extrusions) so they'll have a precise
fit and stay straight and rigid. They can be mounted with 6 screws as
well as the original factory fo
…
Apr 4th 2023