Muzzle Loading

TC Encore Muzzleloader Walnut Stock & Forend SetStandard buttstock and forend for the TC Encore & ProHunter rifles.  Drop-In Fit: These buttstocks are completely inletted for the Encore frame. Remove your original stock, slip this one...

Mueller 2-7×32 APV All Purpose Scope Brightness, Clarity and Performance that out performs anything in its class! Designed for the Shooter by the Shooter! The New Mueller APV (All-Purpose Variable) 2-7×32 AO fills the gap left by other...

Hawke Vantage 3-9x40mm AO All Around Use Riflescope- It's the AO feature that makes this scope so suitable for muzzleloading, shotgun slug, centerfire, rimfire, and even airgun rifle hunting. "AO" means Adjustable Objective... Which means you can dial...

TC Encore Muzzleloader Walnut Forend Custom Designed Laminated Forend for the TC Encore and Encore Pro Hunter, this forend is specifically inletted to fit MUZZLELOADER barrels.  Beautiful walnut look, classy and sporty.  Finished with a Satin...

TC Encore Brown Laminated Forend fits 209x50 Muzzleloader Barrels Custom Designed Laminated Forend for the TC Encore and Encore Pro Hunter, made of Brown Laminated hardwoods.  This forend fits the 209X50 Muzzleloader barrels and is finished with a...

TC Encore Camo Laminated Forend fits 209x50 Muzzleloader Barrels Custom Designed Laminated Forend for the TC Encore and Encore Pro Hunter, made of Camo Laminated hardwoods.  This forend fits the 209X50 Muzzleloader barrels and is finished with...

TC Encore Gray Laminated Forend fits 209x50 Muzzleloader Barrels Custom Designed Laminated Forend for the TC Encore and Encore Pro Hunter, made of Gray Laminated hardwoods.  This forend fits the 209X50 Muzzleloader barrels and is finished with...

EABCO CVA Scout PeepRib Set (Includes Front Sight)- Our original PeepRib Aperture Sight is now available for the CVA Scout centerfire rifle. The PeepRib combines a precision aperture rear sight with a scope mounting base. You can position a...

Thompson Center Encore Muzzleloader Black Composite Forend TC Encore Muzzleloader Forend in Composite Black fits Thompson Center Arms Encore and Encore Pro Hunter muzzleloader barrels. Hardware not included. Add hardware below.For more Buttstocks and...

T/C Encore Muzzleloader Small Rifle Primer Conversion  This kit converts the T/C Muzzleloader to use small rifle primers by way of .25 ACP cartridge cases and a custom breech plug replacement. Simply replace your factory breech plug with this...

The T-17 Pro Hunter™ Accessory Kit includes everything the average hunter will need to fire and clean his muzzleloader. Kit includes: 2oz. bottle of T-17® Bore Cleaning Solvent 1/2oz. T-17® Breech Plug Anti-Seize Grease 40-2 1/2" Cleaning Patches...

  A hardened steel, dual-purpose tool which taps out the forend wedge just enough so that it can be caught and pulled free with the claw end. It's also a nipple wrench that fits all T/C nipples that take #11 caps, except the T/C Scout. For more...

The NEW Lee Auto Prime hand priming tool is a fast, safe, and effective way of priming cases. Also recommended for priming the VariFlame II primer holders for muzzle loaders. Lee Auto Prime uses inexpensive Lee Hand Prime shell holders only (see below)...

T/C's Original Maxi-Ball® .50 cal Conical Bullets   Maxi-Ball's heavy penetration and excellent accuracy have been used extensively by target shooters and hunters for almost 20 years. Legal for Colorado, its reputation as an exceptionally...

TC Encore Pro Hunter Muzzleloader Front Sight .455 Green- Fiber Optic Ramp Style Front Sight fits the special 8-40 threads of the Encore Pro Hunter front sight mounting hole. .455" height measured from the top surface of the barrel to the top of the...

TC Encore Pro Hunter Muzzleloader Front Sight .455 Orange- Fiber Optic Ramp Style Front Sight fits the special 8-40 threads of the Encore Pro Hunter front sight mounting hole. .455" height measured from the top surface of the barrel to the top of the...

  Everything you need for cleaning and conditioning your muzzleloading firearm. T-17 products are specifically formulated to clean and protect your prized muzzleloader. Includes:   2 oz. bottle T-17 Bore Cleaning Solvent...

  Solid brass, the knurled end screws off for easy filling. Holds approximately 80 grains FFFFG Black Powder. Dispenses a small amount of priming powder. Each dispensed charge fills the flash pan of a T/C Flint Lock rifle one-half full. NOTE:...

T/C .50 cal Round Ball Bullets - Flat Rate Shipping*  For those hunters who prefer (or are required by law) to use patched round balls in their muzzleloader, T/C offers these precision swaged, pure lead round balls. Sized properly to work with any...

CVA Muzzleloader Front Sight .445 Height- One piece metal ramp front sight attaches with one 6-48 screw. Orange fiber optic makes it easy to see in low light and woods hunting. Fits a typical CVA .875" diameter muzzleloader barrel. DOES NOT WORK ON THE...

CVA Muzzleloader Front Sight .485 Height- One piece metal ramp front sight attaches with one 6-48 screw. Orange fiber optic makes it easy to see in low light and woods hunting. Fits a typical CVA .875" diameter muzzleloader barrel. This .485" height...

  This Breech Plug Wrench for TC Encore and Omega is a Strong, all steel tubular breech plug wrench. Blued, heat treated, with T-handle. 

Dead Center Duplex Bullets -   Duplex Dead Center Bullet - Shoots a .357 caliber Dead Center bullet from your 50 caliber muzzle loader. A seemingly crazy idea that seats a high BC .357 caliber Dead Center bullet into a sabot-within-a-sabot...

Dead Center BulletsMuzzleloaders are limited in velocity by the physics of the gun and the limitations of the components. The only place left to increase performance is through bullet design... Introducing the Dead Center Bullet. Dead Centers are...

  Small and light, this handy little short starter performs big. A solid aluminum shaft with a concave loading tip, attached to a rugged polymer palm saving knob, provides the hunter with a no-nonsense short starter which is all but...

Extreme Elite Bullets -  The Extreme Elite Bullet represents the "very best value" in an all-lead hunting and target bullet. It delivers outstanding accuracy with Encore and Omega 209X50 rifles. The 330 and 360 gr saboted bullets are optimum for the...

  Uniformly and conveniently applies lube to the breech threads in your barrel. Super Lube™ contains Teflon® to seal the threads in the breech to prevent your plug from getting seized. Works on all break open and pivoting breech...

  Turn your regular ramrod into a working range rod with the addition of TC's lightweight Composite T-handle Short Starter and Extended Super Jag. Add both tools to increase the length of the rod substantially while also providing more leverage...

  100% cotton, these patches work with rifles, shotguns or pistols. By offsetting their position on the jag, centering them or doubling the patch thickness, a variety of calibers and gauges can be accommodated with this one size. 2-1/2"...

  The Speed Shot holds magnum muzzleloader charge for quick follow-up shots. The tubes can be cut to fit your specific loads. Over-sized gripper allows for fast reloading. Speed Shots can be used alone or in conjunction with our sling, belt...

  For .45 calibers 10-32 thread. Knurled to provide maximum contact between patch and bore. Long stepped shank prevents patches from binding. Concave tip allows use for loading. For more Muzzle Loading Accessories Click Here.

Presaturated muzzle loading cleaning patches pack of 100. For more Muzzle Loading Accessories Click Here!

  This .50 caliber 4-In-1 Quick Shot Speed Loader with Bullet Starter has everything you need for quick loading all in one package. It Carries your powder, Carries your projectile, Carries your cap, and Serves as your bullet starter. These come 2...

  A biodegradable all natural lubricant which contains no petroleum-based oil or additives. Reacts differently (chemically) to the combustion of black powder, producing far less “tar like” fouling. 5oz. tube ideally suited for easy application...

Encore Muzzle Loader Screws and WashersFor T/C Encore Muzzleloader Forends The screws and washers needed to attach the Muzzle Loader forend. Includes two (2) forend screws with two (2) washers. Perhaps, you've misplaced your screws or the...

  Solid brass body with steel jaws. This unique design allows the plunger spring to be locked in compressed position for easy loading, then released to keep #11 caps under tension for reliable dispensing. Holds up to 17 of the #11 Percussion...

  A properly patched round ball requires the use of a bullet starter. The purpose of this implement is to start a tight fitting ball into the muzzle and to drive it far enough down the barrel so that it can be handled with the ramrod. This...

 T/C Magnum .50 caliber QuickShot with three .50 caliber Mag Express Sabots with 240 grain XTP bullets. All you have to do is add your favorite black powder or Pyrodex charge and you're ready for the field. The .50 caliber QuickShot with (3) .50 cal...

  T-17 Firearm Wipes are a handy wipe that coats your firearm with a micro thin layer of protectant that withstands the corrosive effects of black powder fouling. Use these wipes prior to hunting in foul weather. Keeps your firearm in factory...

T-17 Foaming Bore Cleaner for Muzzleloaders- The T-17 foaming bore cleaner effectively cleans and neutralizes the harmful fouling in the bore from black powder and black powder substitutes. T-17 also helps to remove plastic, copper and lead deposits that...