Stock Accessories

Accu-Riser Cheek Rest Aligns Your Eye With Your ScopeStandard Rifle Stocks are Cheeked for Iron Sites... Too Low for Scope Sighting Strap or Screw-On Fit, Adjustable Height and Ambidextrous. Positions your aiming eye higher for alignment with scope...

Hogue M-LOK Forend GripOverMolded Hybrid Grip Attaches to Handguard Beautiful and functional grip by Hogue features OverMolded rubber with pebble textured panels. Functions both as a grip for your off hand and as a barricade stop for rested shooting...

CORE AICS Bottom Metal fits Ruger AmericanDrop-In Mag Well Replacement Converts Your Rifle to AICS Detachable Magazines This new "CORE" AICS Bottom Metal from MDT will complete your Ruger American and TIMBR CORE stock project to accept the popular AICS...

Marlin Rossi 95 Handguard Screws (6 Pack) Replacement Parts:- Four 8-32 flat mounting set screws and two 32 x 5/16 butt heads screws that screw into the barrel/mag tube tenon to attach the handguard to the rifle. MARLIN END CAP AND ROSSI 95 (NOT FOR...

Buffer Tube Mount for ManticoreAdapts the Manticore 10/22 to accept milspec buffer tubes so you can mount an AR style buttstock. Accepts mil-spec buffer tubes Single-screw installation Supports straight or angled configuration The Buffer Tube Mount for...

Accelerator Thumb Ledge for Ruger Mark IV 22/45 Provides stability and control for follow-on shots Encourages proper grip Simple, non-permanent installation TANDEMKROSS’s new Accelerator Forward Thumb Ledge helps improve grip and control. With...

Picatinny Folding Buffer Tube Converts Picatinny receiver to accept a buffer tube style buttstock. Works with Sharps Bros TC stocks, Tandem Kross Manticore, and any other guns where a Picatinny attachment is featured at the rear of the receiver. Folds...

Picatinny Buffer Tube Adapter Converts Picatinny receiver to accept buffer tube and buttstock. Works with Sharps Bros TC stocks, Tandem Kross Manticore, and any other guns where a Picatinny attachment is featured at the rear of the receiver. This is a...

Picatinny Folding Buffer Tube Adapter Converts Picatinny receiver to accept buffer tube and buttstock. Works with Sharps Bros TC stocks, Tandem Kross Manticore, and any other guns where a Picatinny attachment is featured at the rear of the receiver...

M-LOK® Rail Covers, Type 1 M-LOK Type 1 Rail Covers are low-profile and light weight covers that install directly onto M-LOK compatible systems. Made of an extremely heat resistant flexible material, these covers offer an enhanced gripping surface...

Savage AICS Bottom Metals These are the Savage OEM Premier direct drop-in bottom metals that fit the Savage Accu-Stock and others with the factory Accu-Stock compatible inletting. Fits Savage 10/110 Model Accu-Stock Does NOT Fit Axis Models Fits Rifles...

MDT AICS Remington 700 SA Precision Bottom MetalAdd AICS detachable magazine compatibility to your Remington 700 short action! Fits Stocks with Badger M5 Bottom Metal Inlet Adjustable Mag Latch seats AICS magazines perfectly Flared Magwell for Fast Mag...

M-LOK and Flush Cups Accessory Panel  This accessory panel works with our Marlin and Henry Modular and Adjustable aluminum butt stocks.  Ambidextrous attachment on either side of the stock Hard anodized aluminum Lightweight at only 2 oz...

M-LOK 44 Magnum Cartridge Holder... The M-LOK 44 Mag Cartridge Quiver holds six rounds close at hand for quick, fast reloading. It complements our popular M-LOK Marlin Lever Action forearms or butt stocks (will also work with any other M-LOK...

M-LOK 45-70, 450 Marlin Cartridge Holder  The M-LOK 45-70 cartridge holder & 450M Cartridge Quiver holds six rounds close at hand for quick, fast reloading. Recommended for our popular Marlin M-LOK forearms or butt stocks (will also work...

Remington 700 Detachable Magazine Conversion Kit for 22-250 Rem - This DROP-IN KIT converts a standard, unmodified Remington 700 BDL rifle to accept detachable magazines. You simply remove the original bottom metal, spring and follower. And replace it...

Remington 700 Detachable Magazine Conversion Kit for 223 Rem - This DROP-IN KIT converts a standard, unmodified Remington 700 BDL rifle to accept detachable magazines. You simply remove the original bottom metal, spring and follower. And replace it with...

Push Buttom QD Sling Swivel fits AR-15, Oryx, etc. This is our standard QD sling swivel with low profile push-button release. It fits the standard .365" QD swivel ports on AR-15s and many chassis stocks like out Oryx. It's made of solid steel, accepts...

Oryx Full Length Forend ARCA Rail- Converts your Oryx chassis stock to mount on bipods, tripods, etc... with the ARCA rail system. Specially contoured to fit the forend taper and M-Lok slots for a perfect flat bottom with ARCA compatible dovetail style...

Oryx Sling Swivel Stud Assembly- Original Self Threading Swivel stud that screws into the existing forend hole on older Oryx Chassis forends. New Oryx chassis will need a backing nut to attach this stud to the forend hole. For use in sling attachment as...