Volquartsen

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take...

Scorpion LLV Compensator A unique pistol comp designed for Scorpion Pistols and their Scorpion LLV barrels. CNC-machined from billet material to match the upper profile and then finished to match. A...

Volquartsen Extended Bolt Release fits Ruger Mark IV Black Slightly Longer and Wider... Makes Releasing the Bolt Easier! Fits Ruger MKIV (Not MKIV 22/45) Finding it too hard release the bolt...

Volquartsen SW22 Victory Laminated Grip - GrayLaminated wood target grips feature thumb rest, heel rest and finger grooves. Designed to give the shooter a relaxed, steadier hold. CNC-machined...

Laminated Target Grips for MK IV 22/45 YES... Target Grips for the 22/45! They feature thumb rest, heel rest and finger grooves. Designed to give the shooter a relaxed, steadier hold. CNC-machined...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Uppers. Includes Patridge Front Sight and Target Adjustable...

Pistol Competition Kit for MK IV, Gold Trigger Trying to figure out which parts are needed to take the Ruger MK IV or MK IV 22/45 to the next level? Look no further than the Pistol Competition Kit...

Volquartsen VC4LLV-6 Competition Upper 6'' fits Ruger MKIV and MKIV 22/45- This replacement barrel ("upper") is a superb upgrade for your Ruger MK IV. It's extremely lightweight, well-balanced, and...

Volquartsen VC4LLV-4 Competition Upper 4.5'' fits Ruger MKIV and MKIV 22/45- This replacement barrel ("upper") is a superb upgrade for your Ruger MK IV. It's extremely lightweight, well-balanced, and...

Volquartsen Ruger MK IV® Accurizing Kit This complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Target Trigger with plunger and...

Volquartsen Gold* Bolt fits Ruger MKII, MKIII, MKIVCNC Machined Competition Bolt is Finished in Gold* Colored Titanium Nitride (TiN)- If you're looking to eliminate stovepipes, jams, and failure to...

Volquartsen Gold* Trigger fits Ruger MKII, MKIII, and MKIV Pistols and 22/45CNC-Machined Target Trigger in *Gold Colored TiN Adjusts for Pre-Travel and Post-Travel - The Volquartsen Target Trigger is...

Main Spring Assemblies for Ruger Mk II 22/45 and Mk III 22/45 PistolsPrecision made replacement for factory main spring assembly. Wire EDM and CNC machined to give the best fit and performance. Mk II...

Magazine Base Pads fit Ruger MKIV Mags (Not 22/45)- Our new Volquartsen Magazine Base Pads for the Ruger MK IV (will not fit Ruger MK IV 22/45) provide more positive magazine insertion, easier...

Magazine Base Pads fit Ruger MKIV Mags (Not 22/45)- Our new Volquartsen Magazine Base Pads for the Ruger MK IV (will not fit Ruger MK IV 22/45) provide more positive magazine insertion, easier...

Volquartsen Mk IV and Mk IV 22/45 Competition KitAlso Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take...

Volquartsen Safety Power Spring fits Ruger MKIV- The MKIV safety is very easy to engage... And sometimes you might engage it when you don't want to... Like when you are shooting in a competition. Our...

Volquartsen Target Hammer Kit for the Ruger 10/22- The target hammer kit was designed to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory hammer (Not for...

Ruger MKIV V-Lock Retainer- An improved bolt stop pin retainer keeps the Ruger MKIV Bolt Stop Pin from drifting or walking out on its own. If you are having issues with the Bolt Stop Cross Pin...

Magazine Release for Ruger MK IV (not 22/45)Standard size replacement for the extended magazine release that comes on factory Ruger MK IV Hunter and Competition models. This part replaces the...

Volthane Target Grips for Ruger MK IV- Featuring an aggressive no-slip diamond checkering, our new Volthane Grips for the Ruger MK IV are made from a proprietary material designed to withstand the...

Volquartsen SureFeed Follower Springs for Ruger MKIV Magazines- The SureFeed Magazine Follower Spring for the Ruger MK IV is 25% stronger than the factory spring. The increased spring rate improves...

Volquartsen Target Sear for Ruger® MK II™ and Mk III™- This specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from...

Volquartsen Extended Magazine Release for MKIV 22/45- Our new Extended Magazine Release for the MKIV allows magazines to sit a little higher for better and more reliable feed. This improves feeding...

Volquartsen MKIV 22/45 Mag Release plus 5 Magazine Base Pads- The ultimate competitors edge! Our new Extended Magazine Release for the MKIV and a 5-Pack of MKIV 22/45 Magazine Base Pads. The new Mag...

Volquartsen Magazine Base Pad fits Ruger MKIV 22/45- Our new Magazine Base Pads for the MK IV 22/45 make magazine insertion and removal quicker and easier-for lightning fast reloads. CNC-machined...

Volquartsen Magazine Base Pad fits Ruger MKIV 22/45- Our new Magazine Base Pads for the MK IV 22/45 make magazine insertion and removal quicker and easier-for lightning fast reloads. CNC-machined...

Volquartsen Bolt Tune-Up Kit for Ruger 10/22 - Corrects most cycling issues with a simple parts swap.- Upgrades your 10/22 firing pin and extractor to eliminate light hits and stovepipes. The...

Adjusts for High or Low Velocity AmmoVolquartsen Recoil Rod and Spring Kit- Provides the best spring tension for reliable function with high or low velocity ammo. This innovative design makes it...

Volquartsen Single Port LLV Compensator- Easy to clean 22 compensator for Volquartsen LLV Barrels/Uppers. Has a single port allowing the compensator to be cleaned without removing it from the LLV...

Ruger Mark II/III and 22/45Volquartsen Scorpion LLV Competition Pistol Barrel- Black 6'' Scorpion LLV replacement barrel (upper) for Ruger Mark II, III, and 22/45 pistols. A CNC-machined billet...

Ruger Mark II/IIILLV Competition Pistol Upper- Black 4.5'' model LLV replacement barrel (upper) for Ruger Mark II and Mark III pistols. A CNC-machined billet receiver is the foundation of this...

Patridge style target sight fits on 6'' Volquartsen LLV (Mk II/III) and LLV4 (Mk IV) Competition Pistol Uppers.

Patridge style target sight fits on 4.5'' Volquartsen LLV (Mk II/III) and LLV4 (Mk IV) Competition Pistol Uppers.

Volquartsen Competition Bolt for Ruger Mk II, III, and IVAre you a competitive shooter looking to eliminate stovepipes, failures to fire and improve the overall performance of your Ruger Mark II,...

Volquartsen Ruger MK IV® Accurizing Kit - Stnls TriggerThis complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Target Trigger...

Ruger Mk IV Laminated Wood Pistol GripBrown, Right Handed, by VolquartsenTarget grips feature thumbrest, heelrest and finger grooves. Designed to give the shooter a relaxed, steadier hold...

Ruger Mk IV Laminated Wood Pistol GripBrown/Gray, Right Handed, by VolquartsenTarget grips feature thumbrest, heelrest and finger grooves. Designed to give the shooter a relaxed, steadier hold...

Volquartsen VC2AK-S-ST Accurizing Kitfor Ruger Mark II, III, and 22/45, Silver/Stainless Trigger- Drop In Target Grade Accurizing Kit with silver extended bolt release and stainless trigger to...

Volquartsen VC2AK-S Accurizing Kitfor Ruger Mark II, III and 22/45, Silver/Black- Drop In Target Grade Accurizing Kit with silver extended bolt release and black trigger to provide a crisp, clean 2...

Volquartsen LLV-4 Compensator BlackScrew on compensator/muzzle brake fits the Volquartsen LLV-4 Upper (barrel) for Ruger® MK IV® pistols. Beautifully shaped to match the unique contour of the...

Volquartsen Ruger MK IV® Accurizing Kit This complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Black Target Trigger with...

Volquartsen Accessory Rail for LLV Barrels  Under barrel Picatinny accessory rail fits both Picatinny and Weaver style accessories. Mounts with two 8-32 screws under LLV barrels. Newer...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Black Mamba Uppers. Includes Patridge Front Sight and Target...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the...

Volquartsen 10/22 Replacement Receiver CNC Machined Stainless steel model is machined from billet 416 material Aluminum (Superlite) model is machined from billet 6061 aluminum alloy and Type III...

Hi-Viz Front SightScrews on to Volquartsen LLV and Scorpion Uppers. Screws included.

Volquartsen 10/22 BoltIncludes Custom Rod and Spring with Buffer  Complete CNC-Machined Bolt features our hardened and tuned extractor for positive, consistent extraction. It also includes...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger...

Volthane Grips for Ruger the Ruger Mk III PistolFamous "Volthane" grips by Volquartsen fit the Ruger Mk III (will not fit the 22/45 models). Designed to position your hand exactly the same every time...

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer...

Volquartsen SureStrike Firing Pin for Ruger MK I, II, III and IV (Including 22/45)   This SureStrike firing pin is designed to eliminate light strikes on the Ruger MK I, II, III and IV...

Ruger MKII Hammer Bushing by Volquartsen  This MKII Hammer Bushing is precision manufactured by "Swiss" screw machine equipment. The hammer pivot pin hole has been drilled & reamed for...

Volquartsen Machined Disconnector for Ruger Mk II/III PistolsThis new Volquartsen disconnector is CNC Machined for a better fit and function over the stamped factory disconnector.  The...

Volquartsen 10/22 Stock Take-Down Screw  This is a precison Allen Head stock screw for your Ruger 10/22 Stock. The Allen head serves two purposes. First, it doesn't get buggered up like slotted...

Volquartsen Target 22 Style Frame fits Ruger MKII and MKIIIA Complete Aluminum Lower Frame Replacement... Includes Volquartsen Accuracy System Internal PartsOur Volquartsen Custom Target Frame is CNC...

Volquartsen Forward Blow 10/22 Compensator1/2x28 Threads Fit Volquartsen, EABCO, and Tactical Solutions Barrels   Volquartsen's "Forward Blow" 10/22 Compensator is designed to stabilize the...

Volquartsen Laminated Right Hand Target Grips for Ruger MkIII Laminated Target Grips by Volquartsen for the Ruger Mk III (will not work on the 22/45 series) features:ThumbrestHeelrestFinger...

Main Spring Assemblies for Ruger Mk II, IIIPrecision made replacement for factory main spring assembly. Wire EDM and CNC machined to give the best fit and performance. Mk II and III version differs...

Volquartsen TG2000 Ruger 10/22 Trigger Guard Assembly   It's Adjustable! The Trigger Guard 2000 is a complete CNC machined trigger guard equipped with precision EDM parts. It features an...

Volquartsen Assembled Lower Frame for Ruger Mark II, Mark III, 22/45A Completely Assembled Lower Frame Replacement... Includes Volquartsen Accuracy System Internal Parts  Our Volquartsen Custom...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and...

Volquartsen Lightweight Carbon Fiber 10/22 Barrel The Lightweight Carbon Fiber Barrel sets the standard for a lightweight barrel - bull barrel match accuracy at half the weight! A stainless steel...

Scorpion Frame fits All Ruger MKII and MKIII Barrels No FFL Required... Order and take delivery personally! All Aluminum Lower Frame for Ruger Mark II, III, and 22/45 Completely Assembled...

Exact Edge Extractor and Holder for CZ 457  The Volquartsen Exact Edge Extractor and Holder for CZ 457 enhance the reliability and performance of your CZ 457. It's engineered to deliver reliable...

Volquartsen Exact Edge Extractor for Remington 870 and 1100The Exact Edge Extractor is manufactured through an EDM process (not an inferior MIM process) to produce exacting tolerances. The new...

Ruger Mk IV Laminated Wood Pistol GripGray, Right Handed, by VolquartsenTarget grips feature thumbrest, heelrest and finger grooves. Designed to give the shooter a relaxed, steadier hold...

Volquartsen Lightweight Barrel and Forend Kit for Ruger 10/22 Takedown Model Premium accuracy combined with Volquartsens tension barrel design in a complete drop-in kit for the Ruger 10/22 Takedown...