Volquartsen VC2AK-S-ST Accurizing Kitfor Ruger Mark II, III, and 22/45, Silver/Stainless Trigger- Drop In Target Grade Accurizing Kit with silver extended bolt release and stainless trigger to provide a crisp, clean 2.25lb trigger pull (pull may vary...

Volquartsen VC2AK-S Accurizing Kitfor Ruger Mark II, III and 22/45, Silver/Black- Drop In Target Grade Accurizing Kit with silver extended bolt release and black trigger to provide a crisp, clean 2.25lb trigger pull (pull may vary slightly due to factory...

Volquartsen V-Cut Single Port LLV-4 Compensator BlackScrew on compensator/muzzle brake fits the Volquartsen LLV-4 Upper (barrel) for Ruger® MK IV® pistols. Beautifully shaped to match the unique contour of the LLV-4 system. It is CNC-machined...

Volquartsen Ruger MK IV® Accurizing Kit This complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Black Target Trigger with plunger and spring. It also comes with pretravel and...

Volquartsen Accessory Rail for LLV Barrels  Under barrel Picatinny accessory rail fits both Picatinny and Weaver style accessories. Mounts with two 8-32 screws under LLV barrels. Newer Volquartsen LLVs are pre-drilled and tapped. We can...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Black Mamba Uppers. Includes Patridge Front Sight and Target Adjustable Rear Sight. Fits Volquartsen 4.5 inch LLV...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel extractor for better function and reliability. The Exact...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIII and 22/45 to the next level? Look no...

Volquartsen 10/22 Replacement Receiver CNC Machined Stainless steel model is machined from billet 416 material Aluminum (Superlite) model is machined from billet 6061 aluminum alloy and Type III Hard Anodized   Volquartsen receivers are...

Hi-Viz 4.5" Fiber Optic Front Sight for the LLV/Scorpion Screws on to 4.5" Volquartsen LLV and Scorpion Uppers. These drop-in sights use existing pre-drilled & tapped holes. Mounting Screws included.

Volquartsen 10/22 BoltIncludes Custom Rod and Spring with Buffer  Complete CNC-Machined Bolt features our hardened and tuned extractor for positive, consistent extraction. It also includes our round titanium firing pin. This round design ...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger. Complete drop-in kit for the Ruger MKII and MKII 22/45 to...

Volthane Grips for Ruger the Ruger Mk III PistolFamous "Volthane" grips by Volquartsen fit the Ruger Mk III (will not fit the 22/45 models). Designed to position your hand exactly the same every time you grip the pistol, these grips are an aid to...

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory dovetail, locks in place with two set screws. Made of...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

Volquartsen SureStrike Firing Pin for Ruger MK I, II, III and IV (Including 22/45)   This SureStrike firing pin is designed to eliminate light strikes on the Ruger MK I, II, III and IV pistols (including 22/45). Machined .004" wider than...

Ruger MKII Hammer Bushing by Volquartsen  This MKII Hammer Bushing is precision manufactured by "Swiss" screw machine equipment. The hammer pivot pin hole has been drilled & reamed for improved precision to help eliminate variances (wobble or...

Volquartsen Machined Disconnector for Ruger Mk II/III PistolsThis new Volquartsen disconnector is CNC Machined for a better fit and function over the stamped factory disconnector.  The additional width of this new disconnector gives increased...

Volquartsen 10/22 Stock Take-Down Screw  This is a precison Allen Head stock screw for your Ruger 10/22 Stock. The Allen head serves two purposes. First, it doesn't get buggered up like slotted head screws. Second, it fits torque wrenches so you can...

Volquartsen Target 22 Style Frame fits Ruger MKII and MKIIIA Complete Aluminum Lower Frame Replacement... Includes Volquartsen Accuracy System Internal PartsOur Volquartsen Custom Target Frame is CNC machined from aluminum alloy. Weighing only 7.1 oz, it...