Blog
Why Choose EABCO Accuracy Barrels?
With so many choices, folks
will often ask what we recommend as the "Best Cartridge". Unfortunately
what's best for one situation is not best for another. For example, 6mm
PPC has won more Benchrest Shooting Competitions than any other
cartridge (I think)... so it should be considered as among the most
accurate cartridges in the world. But it's a little light for deer
hunting. As a contrast, our EABCO 308 Winchester chambering is what the
US Rifle team used at the Bisley matches in
…
Apr 4th 2023
AR10 Compatibilities: Fitting Barrels, Bolts and BCGs to DPMS 308/7.2 NATO Rifles
Unlike the AR15 guns that all conform to a "milspec" standard, the
larger frame "AR10" guns are different and we need to know what works. To
begin with, "AR10" is the name of the 308 gun made by Armalite. It's
not correct to refer to DPMS 308s as "AR10". The DPMS guns are actually
named LR-308. In spite of this, most people refer to all 308 sized guns
as "AR10" regardless of which manufacturer's platform they're compatible
with. Ballistic Advantage "AR10" barrels are actually DP
…
Apr 4th 2023
The Science Behind EABCO Accuracy Barrel Brand Rifle Barrels
Each and every one of our barrels is inspected, checked, and measured throughout our production process. Our barrels are not mass production items where maybe 1 out of 10 or 1 out of 100 gets inspected. Our bores are deep hole drilled on machinery that turns the barrel and keeps the drill stationary. This is the only way to assure the straightest hole... Which is especially critical for long lengths as in rifle barrels. After this, our bores are then reamed to within .0002" of exact bo
…
Apr 4th 2023
EABCO Scope Mounts with our 7th Screw
The Myth: Some people think our 7th Screw concept is for adjusting MOA in our scope bases.The Facts:
Quite the contrary. The 7th Screw concept is part of our rigidity and
straightness that we've been building for T/C Encore Pro Hunter for 20
years. Our mounts are thicker to resist bending and/or warping. They are
totally machined (not castings or extrusions) so they'll have a precise
fit and stay straight and rigid. They can be mounted with 6 screws as
well as the original factory fo
…
Apr 4th 2023
Gun Barrel Break-In Procedure by EABCO
Barrel Break-In Procedure for EABCO Accuracy Barrels - T/C Encore Pro Hunter, Contender, Savage, Remington and Ruger 10/22
Our
EABCO Accuracy Barrels for the T/C Encore Pro Hunter and T/C Contender,
as well as our Savage and Remington are manufactured to the highest
standards. We put a lot of time and money into holding precise and
close tolerances when we machine our barrels... These are necessary
expenses to achieve the level of shooting accuracy we require. On the
other hand, w
…
Apr 3rd 2023