Shop by Model

Universal Shotgun Forend Screw Set for Encore and Pro HunterT/C Shotgun forends use slightly different screws for 20 ga. and 12 ga. If you have lost one or both screws, this kit will get you back up and running. This kit includes one shorter screw 0.75",...

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...

Extended Eye Relief Scope Base for TC Contender/G2  Fits TC Contender and G2 barrels. This new mount extends forward to give longer eye relief when mount a riflescope on your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel...

- This Ruger 10/22 Handguard installs on 10/22 rifles with the standard factory (tapered) contour barrel. A retainer clip on the underside of the handguard snaps over the barrel and holds the guard securely in place. Vents help keep your barrel cool...

Volquartsen Forward Blow 10/22 Compensator1/2x28 Threads Fit Volquartsen, EABCO, and Tactical Solutions Barrels   Volquartsen's "Forward Blow" 10/22 Compensator is designed to stabilize the muzzle while directing noise away from the shooter. It has...

Volquartsen Laminated Right-Hand Target Grips – Fits Ruger Mk III (Not 22/45) Dial in comfort and control with these precision-crafted Target Grips from Volquartsen. Designed specifically for Ruger Mk III pistols, they feature a right-hand...

Pro Hunter "FlexTech" Muzzle Loader Forend Screws and Washers The TC Factory Pro Hunter "FlexTech" forend for muzzle loaders has two screws of different length (2 washers also included). If you've lost one or both screws or washers, this kit supplies...

Advanced Multi-Purpose Telescoping AR15/M16 stock with battery storage tubes on the sides. This five position telescoping stock has two storage compartments with O-ring sealed screw in caps. The storage compartments are water tight and will hold two AA...

The Remington 870 Side Folding Stock must be used with the minimum length forend, which is included with Stock. The stock is made of 4140 steel, fiberglass filled plastic and come with a 3/4" recoil pad and sling loops.

AR-15 Front Sight Adjustment ToolAdjusts Elevation on Military A2 Model Front Sights  This 4-prong front sight tool is designed to adjust the A2 front sight found on the AR-15, M16, and M4. It is machined from steel and has a black zinc finish to...

AR-15 Mag Well Vise BlockBolt It To Your Bench or Clamp It In Your Vise!  The AR-15 Mag Well Vise Block holds your AR-15 safe and secure for service and cleaning. Just slide your AR-15 over the Mag Well Vise block... It fits right into the Magazine...

Ruger 10/22® Bullpup Stock Military Grade Polymer - FN P90 StyleTransform your Ruger® 10/22® into a compact, tactical, FN P90‑inspired platform with the High Tower Armory 10/22 Bullpup Stock. Built from military‑grade, glass‑reinforced...

Savage Thumbhole Varmint Stock for Center Feed Blind MagazinePillar Bedded SA Rifle Stock fits Savage 10/11/12/14/16 with 12FV barrel channel... - Shade Varies  Fits CENTER FEED blind magazine rifles (NOT Stagger feed). Designed for accuracy in...

Pre-Bent Gas Tube for AR-15 Carbine Length Forends   This pre-bent gas tube is required when using Hogue AR-15 Carbine Length Free Float Forends. The internal dimensions of a Hogue Carbine Length Forend are restricted somewhat and this requires...

This forend fits Remington Wingmaster and Express mod. 870 shotguns in 2 3/4 and 3 inch. Choate Synthetic Forends go great with all stocks. Made of fiberglass filled plastic, they look good and will last a lifetime.

If you are looking for a less expensive solution to making your shotgun a tactical entry or home defense weapon, then we have the forend for you. This forend kit includes a forend with pre-drilled holes and a 1-1/2 inch piece of picatinny rail. To attach...

An M1 Carbine Replica Canvas Gun Case that fits the Ruger 10/22, M1 Carbine, and other rifles of similar dimensions (fits rifles up to 36" long). Available in a  lined version that still looks authentic but gives better padding and...

Adjustable Tension V-Block for Ruger 10/22Solves the Problem of Barrel Sag or Droop with Custom Tension  Tactical Innovations Adjustable V-Block allows you to get a perfect answer to the particular barrel "droop" characteristics of your personal...

Ruger 10/22 Stock Assembly ScrewStainless Allen Head Stock Screw Replaces Slotted Factory Screw  The original Ruger 10/22 gun stock screw can now be replaced with a precision stainless Allen head screw. It's pretty neat looking but also quite...

Skelatonized Ruger 10/22 Bolt Handle AssemblyHeavy Duty Spring and C-Clipped Rod Allow Custom Spring Tension  This new "Skelatonized" 10/22 bolt handle assembly adds both style and precision to your Ruger 10/22. The skeletized bolt handle is...