TC Encore ProHunter FS 209x50 Firestick Muzzleloader Barrel 28" SST Fluted, No Sights Scheduled Q2 Launch - New Thompson Center Production   New Pictures will be added as they are available.   E. Arthur Brown Company, Inc 4088 County Road 40...

TC Encore ProHunter 26" 22-250 Remington Barrel Stnls Fluted Threaded New Pictures will be added as they are available. Threaded to 5/8x24"No sights We are excited to offer new products to our loyal TC customers! Estimated ETA Q3-Q4 2025   Brand new...

TC Encore ProHunter 15" 223 Remington Barrel Stnls Fluted No Sights New Pictures will be added as they are available. We are excited to offer new products to our loyal TC customers! Estimated ETA Q3-Q4 2025   E. Arthur Brown Company, Inc4088...

Ruger 10/22 Rifle Performance Pak - Springs Extra Power Recoil Spring Extra Power Hammer Spring Extra Power Trigger Spring Reduced Power Sear Spring Upgrading your Ruger 10/22 with these springs will improve let-off and overall functioning. It is...

Ruger Mark IV Pistol Trigger Shims These trigger shims fit Ruger Mark I, II, III, IV & 22/45 Pistols. They install on the Left Side of the Trigger, between the Trigger and the #AN37 Bolt Stop Assembly. Installing a Shim here will stop the Trigger...

YoDave Marlin 336 Reduced Power Finger Lever Spring No more fighting to click the lever into the fire position on Marlin Model 1894, 1895, 336 and 444 models! Polishing the mating surfaces of the lever and the plunger as well as the addition of a reduced...

 YoDave Marlin 39A Reduced Power Hammer Spring Reduce the force required to open your lever and cycle the bolt by reducing the force of the spring acting on the hammer without sacrificing consistent primer strikes and ignition, ease of cycling is...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

Remington 870 Trigger Tune Spring Kit This kit comprises of both a replacement hammer spring as well as five different trigger springs ranging in pull weight from 1.25lb to 5lb. The hammer spring is made from stainless steel, and the trigger springs are...

Encore Pro Hunter Hammer Spring Original Thompson Center Arms factory replacement hammer spring fit TC Encore and TC Pro Hunter frames.E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

Encore Trigger/Sear SpringOriginal Thompson Center Arms brand replacement for the T/C Encore or Pro Hunter Trigger/Sear Spring.E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

T/C Contender G2 Locking Bolt Set (2 Pieces)  Spring loaded barrel locking bolt set for Original Contender/SSK-50 and G2 Contender. Installs under spring tension into the barrel underlug and locks the barrel into battery when the action is closed...

 8-40 thread Stainless Plug Screws for front sight holes on Thompson Center Muzzleloaders. These screws work on the following TC Muzzleloaders; Encore, Encore Pro Hunter, Black Diamond, Omega and Tiumph. If you need blue plug screws, please click...

8-40 Plug Screws Blue (Pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 8-40 thread Blue Plug Screws fit the  front sight holes...

HandALL® Sig P320 Grip Sleeve - OD GreenHogue Beavertail Grip Sleeve fits SIG SAUER P320 Compact SPECS+ Precision fit for SIG SAUER P320 Compact+ Material: Rubber+ Texture: Cobblestone™+ Color: Olive Drab GreenFEATURES+ Gentle...

MDT AICS Short Action Magazine fits 6GT - 10 Rounds - Economical polymer detachable magazine with polymer follower, this mag fits short action AICS compatible rifles and stocks. Polymer MDT External Box Magazines fit MDT Chassis systems especially well...

Henry Lever Supreme Handguard by RPA tactical styled M-LOK handguard that fits the Henry Lever Action Supreme Rifles... Fits All Henry Lever Supreme Rifles with Fast Install. All parts type 3 hard anodized 6061 aluminum for lifetime durability. A...