Shop by Model

TriggerTech Adaptable fits AR-15, Straight Flat Stnls Trigger   Adjustable from 2.5 to 5 lbs. the TriggerTech "Adaptable" AR-15 Trigger is a general use trigger replacement for the milspec AR-15 trigger. It gives you all of the advantages of FRT...

Hogue Full Bed Block Stock fits Remington 700 BDL w/Heavy/Varmint Barrel- A full length aluminum bedding block is molded into this stock, giving it total free-floated rigidity. It's like a bolt-on accuracy enhancement. We have these set up with a wide...

MDT M-LOK ARCA Rail 3.3 Inch Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail. This handy 3.3 inch ARCA rail attaches to any rifle, handguard, or chassis with M-LOK slots. ARCA Swiss adapters have become the standard for...

MDT GRND-POD PRS Bipod The MDT GRND-POD was designed to maximize versatility, as well as cost savings, while retaining features that are most important in a precision rifle bipod. The GRND-POD goes far beyond the typical Harris Bipods in features, like...

  This Allen Head screw kit includes one long screw 0.785", one short screw 0.475", and two washers.  This hardware kit is specifically made for the 127-7661 or 317-09-02-16 Forends.  These screws do NOT fit muzzle loader nor shotgun...

CZ Magazine 12004 fits 457, 455, Etc - 22 LR, 17 HM2, 10 Rnd, PolymerFactory replacement magazine for CZ 455, CZ 457, CZ 453, CZ 452, and CZ 512

Rifle Basix Trigger CZ-55 for the CZ-455 (Black)Upgrade your CZ rimfire rifle with the Rifle Basix Trigger for the CZ‑455, a precision‑machined, fully adjustable single‑stage trigger designed to dramatically improve feel, control, and shot consistency...

EABCO Forend Washers fit T/C Encore Pro Hunter- These are replacements for the tiny little Washer/Spacers under the screws on TC Encore and Pro Hunter forends. We had a devil of a time finding a source for them and they are expensive. Forend washers are...

Legacy Magazine fits Remington 700 SA Detachable Mag Kit 10 Rounds - These magazines fit Remington 700 rifles that are converted to detachable magazine with the Legacy Sports Detachable Mag Kit. Sometimes referred to as "ammoboost" mags. These magazines...

TC Encore Muzzleloader Walnut Stock & Forend SetStandard buttstock and forend for the TC Encore & ProHunter rifles.  Drop-In Fit: These buttstocks are completely inletted for the Encore frame. Remove your original stock, slip this one...

KAK Compensator Kit9/16x24 fits 40 Cal- Includes Crush Washer- Often, 350 Legend Barrels are threaded 9/16x24 to avoid mounting a 22 or 30 caliber brake. The exit hole has to allow clearance for the .357 caliber 350 Legend bullet. The easy answer for...

Original Bob Sled CMMG .22 Service Rifle Single Shot Mag - The CMMG-SVC Bob Sled provides a single shot loading bed or follower to AR-15 rifles with the CMMG .22 LR conversion. This service length magazine allows the easy loading and firing of single .22...

Original Bob Sled CMMG .22 Match Rifle Single Shot Mag - The CMMG-M Bob Sled provides a single shot loading bed or follower to AR-15 rifles with the CMMG .22 LR conversion. This allows the easy loading and firing of single rounds during competition,...

CMMG Medium Taper 350 Legend Barrel...Medium Taper 16 inch 350 Legend barrel fits AR-15 platform. Perfect for building your custom AR-15 upper group. Comes with properly installed M4 barrel extension. All CMMG barrel sub-assemblies are properly...

Bullet-Button® AR-15 Patriot Mag Release- Based off the original Bullet Button magazine lock concept, this new Patriot Mag Release makes the operation more convenient. It's the Bullet Button RELOADED! This new kit is California 2020 compliant and...

AR-15 / AR-10 Bullet-Button®- This is the original magazine release lock for AR15/AR10 rifles to make them compliant with California's high capacity magazine laws. The law says the magazine must not be detachable conveniently. It must require "tools"...

TC Encore Pro Hunter Hammer Spring Original Thompson Center Arms factory replacement hammer spring fit TC TC Encore and TC Pro Hunter frames.E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

ORYX Chassis Stock fits Remington 700 LA/RH - OD Green Mag Compatibility: 3.715" AICS magazines   aPlease check the size of your Long Action AICS Magazine...       (It's stamped right on it. Make sure it will...

ORYX Chassis fits Savage 10/110 LA/RH - OD Green Mag Compatibility - Long Action AICS 3.715"  aPlease check the size of your Long Action AICS Magazine...    (It's stamped right on it. Make sure it will fit!) Chassis panels come in...

ORYX Chassis Stock fits Savage Axis Long Action /RH - OD Green Mag Compatibility - Long Action AICS 3.560"  Please check the size of your Long Action AICS Magazine...    (It's stamped right on it. Make sure it will fit!) Chassis...