Shop by Model

Henry Lever Supreme Butt Stock by RPA tactical styled butt stock that fits the Henry Lever Action Supreme Rifles... FITS: All Henry Lever Supreme rifles. MATERIAL: Made of 6061 Type III anodized aluminum LIGHTWEIGHT (22 oz): Weighs less than the factory...

Blue TC Encore Accuracy Barrels® by EABCO22 Creedmoor 1:7, Standard Model, Match Grade BarrelsTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

Hogue EZG Pre-Sized Savage Recoil Pad Hogue pre-sized recoil pads are made with an exclusive recoil reducing cushioned elastomer bonded to a super rigid polymer alloy base plate. These pads feature computer designed internal cushion construction combined...

Hogue Pillar Bed Stock fits Standard Savage Barrel Contour,Long Action, Top Loading Box Magazine  Models 110, 111, 114, & 116 Fits Standard Factory Tapered Barrel Fits Long Action Top Loading Box Magazine  - Models 110, 111, 114, & 116...

Cornerstone Safety Thumb Ledge for Ruger® Mark IV Black - 1911 Style Thumb Safety for Ruger Mark IV. Replaces factory thumb safety without modifying the internals, and improves hand placement for better grip and control. - This oversized,...

The Ultimate Trigger Kitfor the Ruger MKIV & MKIV 22/45 RedThis “Ultimate” Kit for Ruger® Mark IV™ & Mark IV 22/45™ is a matched set of upgrade parts - DO NOT use any other brand of sear and hammer with the TANDEMKROSS...

Colt SA Revolver RP Shooters Pak This Shooter's Pak includes a Wolff reduced power mainspring, a reduced power sear/bolt spring (flat-type), extra power base pin spiring and stainless steel hand ejector spring. These kits offer great improvement in the...

Colt SAA Revolver RP Shooters Pak This Shooter's Pak includes a Wolff reduced power mainspring, a reduced power sear/bolt spring (wire-type), extra power base pin spiring and stainless steel hand ejector spring. These kits offer great improvement in the...

Picatinny Folding Buffer Tube Converts Picatinny receiver to accept a buffer tube style buttstock. Works with Sharps Bros TC stocks, Tandem Kross Manticore, and any other guns where a Picatinny attachment is featured at the rear of the receiver. Folds...

Picatinny Folding Buffer Tube Adapter Converts Picatinny receiver to accept buffer tube and buttstock. Works with Sharps Bros TC stocks, Tandem Kross Manticore, and any other guns where a Picatinny attachment is featured at the rear of the receiver...

Encore Pro Hunter Forend 11 Inch with Picatinny Rail A long forend for TC Encore Pro Hunter Barrels and Frames. These have been re-designed with aluminum in the rail and a QD slot for slings! Includes two 8-40 x 7/16" screws and will attach to either...

TC Contender Forend 7 Inch with Picatinny Rail A full featured forend for G1 and G2 Contender and well as SSK-50 Barrels and Frames. These have been re-designed with aluminum in the rail and a QD slot for slings! This forend uses a unique "hanger bar"...

Encore Pro Hunter Grip with Picatinny Rail Black composite grip fits the Encore Pro Hunter and features a Picatinny accessory rail at the rear. This allows attachment of straight as well as folding buttstocks of all styles and shapes... Adding to the...

G1 Contender Grip with Picatinny Rail Black composite grip fits the G1 Contender and features a Picatinny accessory rail at the rear. This allows attachment of straight as well as folding buttstocks of all styles and shapes... Adding to the versatility...

Blue TC Contender/SSK-50/G2 Accuracy Barrels® by EABCO7-30 Waters 1:9, Standard Model, Match Grade BarrelsTC Contender G2 Accuracy Barrels® fit the TC Contender and G2 Contender frames. Manufactured by E. Arthur Brown Company with...

Blue TC Contender/SSK-50/G2 Accuracy Barrels® by EABCO22 Long Rifle 1:16, Standard Model, Match Grade BarrelsTC Contender G2 Accuracy Barrels® fit the TC Contender and G2 Contender frames. Manufactured by E. Arthur Brown Company with...

T/C Encore and Pro Hunter Barrel Pivot Hinge Pin  This is the original factory hinge pin that pivots the barrel downward when you open and close your Encore or Pro Hunter action. Made from precision ground "drill rod" to fit closely for accuracy...

TC Encore 12 Ga Shotgun Cross-Slot Aluminum Base - Matte The TC Encore 12 Ga shotgun cross-slot base is strong and durable, yet lightweight and versitile.  Easily mounts to your 12 Ga Encore shotgun.     New Pictures will be added as they...

T/C Contender and G2 Barrel Pivot Hinge Pins  This is the original factory hinge pin that pivots the barrel downward when you open and close your Contender action. Made from precision ground "drill rod" to fit closely for accuracy while allowing...

T/C Contender and G2 Barrel Pivot Hinge Pin  This is the original factory hinge pin that pivots the barrel downward when you open and close your Contender action. Made from precision ground "drill rod" to fit closely for accuracy while allowing...