Shop by Model

AccuWasher Gen 2 Muzzle Device Alignment The AccuWasher® Gen 2 Muzzle Device Alignment System is the ultimate solution for precise and repeatable muzzle device alignment. Unlike traditional crush washers, this mono-shim system is precision...

Pac-Lite Compensator for 22 LR The PAC-LITE Compensator is designed to complement TacSol PAC-LITE Barrel upgrades for Ruger® Mark series and 22/45® pistols. Engineered with 360° ports, these compensators effectively reduce muzzle rise while...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

Thread Protector fits AR15 HBAR Contour 1/2 x 28 Stainless- Protect and beautify your HBAR muzzle threads with this beautiful knurled stainless thread protector. Standard 1/2 x 28 thread with a length of 5/8th inch and .740" diameter, it fits all EABCO...

Volquartsen Single Port LLV Compensator- Easy to clean 22 compensator for Volquartsen LLV Barrels/Uppers. Has a single port allowing the compensator to be cleaned without removing it from the LLV barrel. The perfect match for your Mark II/Mark...

Universal Thread Protectors- Thread protectors with the standard AR15 1/2x28 and AR308 5/8x24 thread patterns and available in three outside diameters. Precision machined from carbon steel and finished in Mag Phosphate black. A raised gripping portion...

Steel Game Changer Pro Compensator by Tandemkross- Screw on muzzle brake for Ruger MK pistols, SW22 Victory Pistols, Browning Buckmark, and more. Uses existing 1/2x28 muzzle threads. Unique indexing method uses an O-ring for finger-tight,...

Volquartsen V-Cut Single Port LLV-4 Compensator BlackScrew on compensator/muzzle brake fits the Volquartsen LLV-4 Upper (barrel) for Ruger® MK IV® pistols. Beautifully shaped to match the unique contour of the LLV-4 system. It is CNC-machined...

Standard AR15 A2 Flash HiderScrews on to your threaded barrel. 1/2x28 tpi. Overall length approximately 1.75 inches. Also works great as a thread protector.  

Game Changer Rimfire Compensator  The Game Changer has gas ports on the top and sides so it stabilizes the muzzle and virtually eliminates muzzle rise. With no ports on the bottom, it's important to mount the game changer with the ports...

Browning Buckmark Compensator Matte Black   Originally designed for the Browning Buckmark, these Trail-Lite® Compensators are a simple addition to spruce up ANY 1/2"x28 threaded .22LR pistol or rifle. With 360 degree ports, these...

Ruger 10/22 Thread Protector 1/2 x 28 Thread, .920 Dia by .400 Length - We've had so many compliments on our 10/22 Accuracy Barrel Smooth Steel Thread Protectors, we decided to offer them as a separate accessory. Made to fit rifle barrels with threaded...

Volquartsen Forward Blow 10/22 Compensator1/2x28 Threads Fit Volquartsen, EABCO, and Tactical Solutions Barrels   Volquartsen's "Forward Blow" 10/22 Compensator is designed to stabilize the muzzle while directing noise away from the shooter. It has...

TacSol X-Ring Ruger 10/22 .920" CompensatorThe advanced design offers 360 degree ports which steadies the muzzle so you can watch your hits and get back on target fast during rapid fire.  Fits pre-threaded 10/22 barrel...

Steel Game Changer Pro Compensator by Tandemkross- Screw on muzzle brake for Ruger MK pistols, SW22 Victory Pistols, Browning Buckmark, and more. Uses existing 1/2x28 muzzle threads. Unique indexing method uses an O-ring for finger-tight,...

X-Ring TacSol Compensator fits Ruger 10/22 and X-Ring .22 RiflesMuzzle Brake specially made to fit 10/22, .920"  barrels with threaded end (1/2 X 28" Threads). Also referred to as a compensator. Advanced 360 degree ports steady the muzzle so you can...