Shop by Model

  Factory duplicate safety kit for 700 Models. ALL parts interchangeable with REMINGTON safeties!.   See all of our trigger systems at our Rifle Basix Home Page!

Rifle Basix Replacement Safety Kit for Remington 700 Rifles   Rifle Basix Remington replacement safety kit fits all 700 models.  All parts interchangeable with Remington factory safeties.  

Rifle Basix Trigger ERV-3 for Remington Rifles Varmint and Target Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 4oz. to 1.25 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061...

Rifle Basix Trigger ERV-3 for Remington Rifles Varmint and Target Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 4 oz. to 1.25 lbs. Uses Factory Safety   Rifle Basix Remington triggers feature state of the art CNC machined billet...

Rifle Basix Trigger L-3 for Remington Rifles (Silver Finish)Target Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 2 oz to 6 oz. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061...

Rifle Basix Trigger L-3 for Remington Rifles Target Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 2 oz to 6 oz. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061 housings, internal...

Rifle Basix Trigger LV-1 for Remington Rifles (Silver Finish)Varmint Grade, Fits Remington 700, 40X, 7, and XR-100.  Adjusts from 8 oz to 1.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet...

Rifle Basix Trigger LV-1 for Remington RiflesVarmint Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 8oz to 1.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061 housings,...

Rifle Basix Trigger L-1 for Remington Rifles (Silver Finish)Hunter Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 1.5 lbs to 3.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined...

Rifle Basix Trigger L-1 for Remington RiflesHunter Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 1.5 to 3.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061...

The standard Encore forend screws (one long screw 0.785", one short screw 0.475") fit the Encore Rifle Forends (Not the Pro Hunter Rifle Forends). Note:  The standard Encore PRO HUNTER screws (two long screws) work on the Encore Pro Hunter (Flex...

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

Ruger Mark Series Ambidextrous Combat Low-Rise Holster. Shooters demanded it; this holster is designed to fit the Ruger® Mark Series (MK-I, MK-II, MK-III, MK-IV & 22/45) .22LR pistols with or without an optic or a suppressor. This...

  Our M1 Carbine Sling with Oiler is completely faithful to the early horseshoe type 1st issue slings. These dot the eye fastener, khaki web slings are exactly as per the original WWII issue. The oiler has the shaped dipper and gasket. For those who...

TechSights 200 Sight Set for Ruger 10/22   The TechSights 200 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the...

  The TechSights 100 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the front, and approximately 7.5" more sight...

Dead Center BulletsMuzzleloaders are limited in velocity by the physics of the gun and the limitations of the components. The only place left to increase performance is through bullet design... Introducing the Dead Center Bullet. Dead Centers are...

  This Thompson Center Pyrodex powder spout makes it easier to pour Pyrodex powder directly from the container into a powder measure. This spout is for the Pyrodex Powder Bottles Only. For more Muzzleloading Accessories Click Here.

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...