Volquartsen Laminated Right-Hand Target Grips – Fits Ruger Mk III (Not 22/45) Dial in comfort and control with these precision-crafted Target Grips from Volquartsen. Designed specifically for Ruger Mk III pistols, they feature a right-hand...

Ruger MK II/III/IV Picatinny Scope Mount Rail by Majestic ArmsLow Profile Does Not Interfere with Iron Sight Picture!  Precision machined, true Mil-Spec Picatinny Rail for mounting a scope, red dot, or laser on your Ruger MK Pistol. Fits Ruger Mk I,...

McFadden Ultimate Clip Loader for Ruger Mk II/III/IV Pistols-The Ultimate Clip Loader is for speed loading Ruger Mk II, III, IV, and 22/45 Magazines. Load the hopper with up to 50 rounds of 22 ammo. Shake the loader to align the shells. Then just slip...

Ruger® Brand Magazines for Mk II and MK I Pistols Genuine Ruger factory 9 Round magazines for your Ruger Mark I and Mark II Pistols.  Note, this does not fit the 22/45 versions.

Aluminum Magazine Base Pad for Ruger Mk II, Mk III, Mk IV  Magazine Base Pads are common in action pistol shooting because they give more reliable seating of magazines under speed loading situations. But with the Ruger Mk II and Mk III pistols,...

Main Spring Assemblies for Ruger Mk II, IIIPrecision made replacement for factory main spring assembly. Wire EDM and CNC machined to give the best fit and performance. Mk II and III version differs from 22/45 version due to grip angle difference in the...

Extended Bolt Release for Ruger MK II and Mk III (Not 22/45) Convert your Ruger Mk II or Mk III bolt release to a convenient thumb tab that works just the the bolt release on a 1911. Made by Majestic Arms. (Note: Does not fit 22/45 models).  E...

Volquartsen Assembled Lower Frame for Ruger Mark II, Mark III, 22/45A Completely Assembled Lower Frame Replacement... Includes Volquartsen Accuracy System Internal Parts  Our Volquartsen Custom 1911 Style Frame is CNC machined from aluminum alloy...

Ruger Mark IV Pistol Trigger Shims These trigger shims fit Ruger Mark I, II, III, IV & 22/45 Pistols. They install on the Left Side of the Trigger, between the Trigger and the #AN37 Bolt Stop Assembly. Installing a Shim here will stop the Trigger...

The Ultimate Trigger Kitfor the Ruger MKIV & MKIV 22/45 RedThis “Ultimate” Kit for Ruger® Mark IV™ & Mark IV 22/45™ is a matched set of upgrade parts - DO NOT use any other brand of sear and hammer with the TANDEMKROSS...

Krossfire Bolt for Ruger® Mark IV™ & 22/45™ A TandemKross Bolt with Black DLC Finish Assembled with TandemKross Firing Pin, Extractor, and Guide Rod Includes Integral Halo Charging Ring for Improved Clearing and Charging Upgrade...

Scorpion Frame fits All Ruger MKII and MKIII Barrels No FFL Required... Order and take delivery personally! All Aluminum Lower Frame for Ruger Mark II, III, and 22/45 Completely Assembled w/Volquartsen Competition Parts Drop-In Ready... Fits All Ruger...

Cthulhu Grip Frame fits All Ruger MKIV Barrels No FFL Required All Aluminum Lower Frame for Ruger MKIV Completely Assembled w/TandemKross Competition Parts Drop-In Ready... Fits All Ruger Mark IV Barrels Drop-In Ready... Fits All Ruger Mark IV 22/45...

Mark IV™, Mark III™ & 22/45™ Picatinny Rail Factory 1913 style picatinny rail for Mark IV™, Mark III™ and 22/45™. Rail fits firearms with factory pre-drilled receivers. Includes three screws. (Does not fit Mark I and Mark II™ pistols.) Genuine...

Volquartsen Gold* Bolt fits Ruger MKII, MKIII, MKIVCNC Machined Competition Bolt is Finished in Gold* Colored Titanium Nitride (TiN)- If you're looking to eliminate stovepipes, jams, and failure to fire issues, the Competition Bolt is the way to go. It...

Volquartsen Mk IV and Mk IV 22/45 Competition KitAlso Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

Hogue 79127 Piranha G-Mascus Grip Fits Ruger Mark IV 22/45, Black/Gray- Exotic black/gray G10 grip panel material looks like "Damascus" color patterns and is machined to Piranha style gripping surface. G10 grip panels are precision machined...

Patridge style target sight fits on 4.5'' Volquartsen LLV (Mk II/III) and LLV4 (Mk IV) Competition Pistol Uppers.

Volquartsen Competition Bolt for Ruger Mk II, III, and IVEliminate stovepipes, failures to fire and improve the overall performance of your Ruger Mark II, III*, IV or Mark IV 22/45 pistol with this Competition Bolt! (* MKIII must remove chamber indicator...

Ruger MKIV 22/45 Race Gun Kit Black- All of the most popular MKIV 22/45 Pistol accessories from Tandemkross, favorites in speed shooting sports like the "Rimfire Challenge" and "Steel Challenge". Here's what you get:1 "Halo" Charging Ring1 "Victory"...