Shop by Model

Remington 700 Accuracy Barrel® 300 Win Mag, 1:10, Blue Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI (Standard Remington) Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length,...

Stainless AR-15 Fluted HBAR Barrel - National Match Grade Upgrade your AR-15 with our 24" Stainless Steel Fluted HBAR Barrel, designed for precision shooting with 5.56 NATO and .223 Rem (Wylde) compatibility. Featuring an 11° target crown and a 1:9...

Spitfire Lightweight Barrel for Ruger® 10/22® Lightweight 16" barrel optimized for competition performance Compatible with many M-LOK® accessories 1/2"x28 muzzle threading Introducing the Spitfire Lightweight Barrel for Ruger®...

Savage Accuracy Barrel® 300 Winchester Magnum 1:10 Fits Savage 10/110 Series Rifles Standard Small Shank 26" length, weight 4lbs 7.8oz Varmint weight tapered to just under .800" diameter at muzzle Bore dimensions reamed consistent to airgauge within...

TANDEMKROSS Eagle’s Talon Extractor for Ruger® 10/22® – Reliability You Can Count On Upgrade your Ruger® 10/22® with the Eagle’s Talon Extractor from TANDEMKROSS, a precision‑machined replacement designed to eliminate...

Encore Pro Hunter Forend 8 Inch with Picatinny Rail A short forend for TC Encore Pro Hunter Barrels and Frames. Includes two 8-40 x 7/16" screws and will attach to pistol spaced forend holes. The barrel channel will accommodate barrels up to .824" in...

TC Contender Forend 9.5 Inch with Picatinny Rail A full featured forend for G1 and G2 Contender and well as SSK-50 Barrels and Frames. This forend uses a unique "hanger bar" attachment system. The hanger bar attaches to the barrel and the forend attaches...

TC Encore Picatinny Aluminum Rail - Matte The TC Encore Picatinny rail is lightweight and versitile to fit any picatinny application.  Ideally set in a matte blue finish to detract any glair or shine..  Easily mounts to your Encore or ProHunter...

TC Encore 209x50 & Omega Breech Plug - The first breech plug design for TC Encore "209X50" muzzleloading barrels. Later TC came out with the Omega muzzleloader and used this same breech plug. Compare the photo with your old breech plug to be sure you...

Encore Pro Hunter Speed Breech Plug (Original) - Originally introduced on muzzleloader barrels with the Pro Hunter label, the original Speed Breech combines engine piston style sealing rings with an O-ring and a quicker breechj plug removal system...

TC Encore ProHunter FX Speed Breech 3 Speed Beech 3 breech plugs require no tools, and spin out by hand for easy cleaning.  The TC Encore FX is the fixed version, which requires a specific FX Speed Breech 3 plug.  Replace your existing breech...

Volquartsen MKIV 22/45 Mag Release with two Base Pads- The ultimate competitors edge! Our new Extended Magazine Release for the MKIV and a 2-Pack of MKIV 22/45 Magazine Base Pads. The new Mag Release allows magazines to sit a little higher for better and...

Remington 700 Detachable Magazine Conversion Kit for 308 Winchester, 10 Rnds - This DROP-IN KIT converts a standard, unmodified Remington 700 BDL rifle to accept detachable magazines. You simply remove the original bottom metal, spring and follower. And...

M-LOK Forend for Manticore X 10/22 Chassis At a Glance: Compatible with M-LOK® accessories Adjustable mounting for use on OEM and aftermarket 10/22® fixed barrel receivers Made from lightweight CNC machined aluminum Upgrade your Manticore X...

Folding Picatinny ButtstockFits 10/22 Manicore Chassis and Other Picatinny Stocked Guns At a Glance: Fits 10/22 Manticore Chassis Standard picatinny mount to fit many common platforms Sturdy folding hinge can be configured to hold to the left or to the...

TC Encore Pro Hunter Firing Pin - S7 Steel Firing pins can sometimes chip or break and you have to replace them. These new "S7" firing pins are an improvement. The S7 steel can be tempered so it is both hard and tough... Making these firing pins more...

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* SPEEDLOCK Hammer Spring - Gives More Reliable Primer...

Stock Tube Adapter Fixed Picatinny The perfect accessory for your PCC or Manticore X 10/22, the adapter mounts strait to Picatinny and gives you the option to mount any stock that attaches to a carbine buffer tube. Easily installing to standard...

Colt AR15/M16 Upper Adaptor Offset BushingAdapt your Colt large pin upper to fit your small pin lower with this offset adapter bushing.  On the Colt AR15/M16, the front pin that joins the upper receiver to the lower receiver is larger than the...

Ruger MK I, II, III, and 22/45 Performance Pak - Springs Extra Power Recoil Spring Extra Power Firing Pin Spring Reduced Power Hammer Spring Reduced Power Trigger Spring Fit: Ruger Mark I, II, III, and 22/45 Upgrading your Ruger pistol with these...