Timney 517-16V2 Straight Trigger fits Rem 700 w/ Safety Nickel Plated

Timney 517-16V2 Straight Triggers for Remington 700
Replacement of Trigger and Safety System, Adjustable 2-4 lb. (Factory set at 3lbs) Nickel Plated
- The "Straight" Timney Triggers for your Remington 700 will give you a perfect trigger pull for your best accuracy potential. Adjustable for take-up, over-travel, and trigger pull weight from 2-4 lbs, these triggers are held to far tighter tolerances than factory triggers... The geometry on these triggers is held to within .0005 inch (5/10,000ths of an inch) for consistent fit and function! Same as Timney 510 but straight with nickel finish.
- There are also two main design differences in the Timney Triggers vs the Remington factory triggers: First, the trigger is made from a solid block of heat treated steel with no "connector bar". Second, the Timney Triggers have a completely different and superior safety design that blocks the trigger, not the sear. There is no way to move the trigger when it is on safety, so when you take it off safety, it remains in the same position. (BUT REMEMBER: Never trust ANY safety... Always keep every firearm pointed in a safe direction).
- These triggers come with Photo Illustrated Instructions.