![]() |
Ruger Mk III Home * Ruger 10/22 *
Tactical Solutions
|
Ruger Mark IV, Mark III, and Mark II Parts and Accessories
Including Ruger Mark IV 22/45 and MKIV 22/45 Lite
Ruger Mark IV Home |
Ruger Mark IV Series |
Ruger Mark IV 22/45
Follow these links for Best Selection, Best Quality, and Best Prices
Ruger® Mark IV™ 22/45™ are Trademarks of Ruger Firearms Corp
![]() Barrels and Uppers |
![]() Grips and Frames |
![]() Magazines | Accessories |
![]() Accuracy Tune-Up Kits |
![]() Mounts and Sights |
![]() Parts and Action Tuners |
![]() Speed Strip Kits by Majestic Arms |
![]() Ultimate Clip Loader |
![]() Magazine Ejector Kits |
![]() Extended Mag Release |
![]() Magazine Bumper Pads |
![]() Laminated Target Grips |
Ruger MKIV Race Gun - We combined the new Gold Standard trigger and Master Grade MKIV 22/45 accuracy kit from Majestic Arms and achieved the best trigger I've ever felt on a Ruger Pistol. We removed the original rear sight and scope rail. Opting for the low profile JPoint Red Dot sight. Trigger system upgraded to Gold Standard Trigger, Pendulum Sear, Full Mass Hammer. Also removed the magazine disconnect. Finished off with anodized aluminum magazine bases and Hogue wrap around grips. We installed several upgrades: Majestic Arms Gold Standard trigger, Pendulum sear, full mass hammer, and anodized aluminum magazine base pads. Hogue wrap around grips are low profile and add finger grooves for consistent grip each time you grasp. The Majestic Arms Master Grade Kit for Ruger MKIV and MKIV 22/45 features a full mass hammer for reliable ignition and a Pendulum sear for balanced engagement and release. The washer/spacer removes the undesirable magazine disconnect feature from the MKIV. The Majestic Arms "Gold Standard" Trigger for Ruger MKII, MKIII, MKIV, and 22/45 is adjustable for pre-travel, over-travel, and Length of Pull. AND, the oversized plunger face gives smoother trigger spring compression. |
Tactical Solutions Pac-Lite...
Convert your Ruger Mark III Pistol into a lightweight, easy packing tack
driver with our new Pac-Lite "upper" barrel system. These threaded end barrels
replace your factory barrel and receiver with lightweight anodized aluminum (the
barrel is lined with precision button rifled steel). We're introducing two
models/lengths of these new Pac-Lite barrels. Each one included adjustable iron
sights and a threaded muzzle with thread protector. Use the threaded muzzle to
install an accessory recoil compensator! (threads are 1/2 x 28). |
![]() ![]() ![]() |
NOTE : All "Pac-Lite" Barrels fit Ruger .22/45 & Ruger MK I, MK II and MK III pistols and use the original Ruger frame and bolt. |
![]() |
MKIII Holster Details - A brand new
design made just for the Ruger Mark III, the brand name is Black Dog and I think
it was made for them by an outfit called tdlabs.com. I checked and they make
advanced police holsters! This Ruger Mark III Holster from
Black Dog has adjustable retention, adjustable fit, and is configurable for
right or left hand use. It works with belts up to 2" wide and holds your pistol
rigidly and reliably. An excellent holster for competition or sporting carry! Info/Order Ruger Mark III Combat Holster |
![]() |
Volquartsen Trigger Job Accurizing Kits...Upgrade Your Ruger Mk II, III, or 22/45 with a Match Trigger & More!This is the Volquartsen accessory that launched our Ruger Mk III expansion. Our production manager Royce installed this kit in his Ruger 22/45 and it leap-frogged him into first place at the local pistol league. The other shooters asked how he got so good all of a sudden and he told them about his new Volquartsen Trigger Job Accurizing Kit. They tried his gun... And then they all wanted kits installed in their guns.Complete drop-in kit for the Ruger MKII/MKIII (MkIII kit will also fit 22/45) to provide a crisp, clean 2.25 lb trigger pull (pull may vary slightly due to factory frame variances). The kit includes an extended bolt release, target hammer, target sear, target trigger w/ overtravel screw, return trigger plunger spring and polished plunger. No stoning required. Order/Info Volquartsen Trigger Job Accurizing Kits |
![]() Extended Bolt Release |
![]() Mag Release 22/45 |
![]() Mag Base Pad Mk II & III |
![]() Mag Release Mk I & II |
![]() |
Volquartsen Magazine Ejectors for the Ruger Mk III and 22/45For the 22/45 - The Volquartsen Spring Loaded Magazine Ejector Base Pad for the Ruger 22/45 will improve the “mag drop” of the factory magazine. Its unique design uses spring pressure to forcefully remove the magazine from the grip frame. The innovative design not only aids in magazine removal but also adds an extension to the bottom of the magazine to make magazine reloads quick and reliable every time. Simply remove the magazine floor plate from a factory 22/45 magazine and replace with this ejector for an enhanced shooting experience!For the MkIII - The easy to install Volquartsen Spring Loaded Magazine Ejector will eliminate the hang ups and provide a forceful magazine ejection each and every time. Info/Order Volquartsen 22/45 Magazine Ejector Base Pad Info/Order Volquartsen Spring Loaded Mk III Magazine Ejector |
Ruger MK Speed Strip Conversion Kits...Quick and Easy Disassembly of Ruger MK .22 PistolsThese new Speed Strip conversion kits make disassembly of your Ruger Mk .22 Pistol easy and quick. No more busted fingernails and frustration with the original factory grip lever disassembly process.With the Speed Strip Kit installed, disassembly is a simple process to unscrew the bolt stop pin and remove the bolt. The video (right) demon-strates it better than any words we could write in this space. Three Different Models... Here's How to Choose:If you have a Ruger Mk I, MkII, or Mk II 22/45, get the "Original" Kit or the "Mk III 3.2 Upgrade" Kit for improvements in trigger performance.If you have a Mk III or Mk III 22/45, you have two choices: The "Basic Mk III" Kit for the Speed Strip conversion. Or, the "Mk III 3.2 Conversion" for Speed Strip conversion with Magazine Disconnect omission. (The Mk III 3.2 Conversion actually works in Mk I and Mk II as well as Mk III pistols. The 3.2 bushing gives improved trigger performance in all three.) More on the Mk III 3.2 Conversion Kit...Ruger Mk III pistols have a politically mandated "Magazine Disconnect" feature that prohibits the gun from firing when the magazine is removed. This feature has some negative affects on the trigger pull and causes the magazine to drag when removed (rather than dropping out freely).The Mk III 3.2 Conversion Kit safely omits the magazine disconnect feature from MK III pistols (and installs the Speed Strip capability). This kit will also upgrade a Mk I to a Mk II hammer system and the 3.2 bushing will improve the trigger performance of Mk I, Mk II, Mk III, and both Mk II and Mk III 22/45 pistols. Confused? Order the Mk III 3.2 Conversion... It works for everything! |
Click Here to Order Directly from EABCO!ORDER Basic Mk III Speed Strip Kit for all Mk III ORDER Mk III 3.2 Conversion for all Mk I, II, and III ORDER Extended Bolt Release Mk II and Mk III ORDER Extended Magazine Releases Mk I, II, III ORDER High Performance Firing Pin I, II, III, 22/45 ORDER Walnut Target Grips for Mk II, III, 22/45 ![]() ![]() ![]() |
![]() |
Volquartsen Laminated Mk III Target GripsSerious Bullseye Competitors and target shooters know that the slightest change in grip position can change your point of impact even when your sights and aiming eye are aligned the same from shot to shot. The purpose of these Target Grips is to position your hand in as close to the same place every time you pick up your gun... Improving your accuracy potential!Laminated Target Grips by Volquartsen for the Ruger Mk III feature thumb rest, heel rest and finger grooves. Designed to give the shooter a relaxed, steadier hold. CNC machined from laminated wood. Includes extended bolt release, extended magazine release and four allen head screws. Available in several colors...Brown, Gray or Brown/Gray. Info/Order Volquartsen Laminated MK III Target Grips |
![]() Mk II & III Magazine Base Pad |
![]() 22/45 Mag Base Pad |
![]() 22/45 Finger Hook Mag Base |
![]() 22/45 Mag Base Pad |