Ammo

The hardened dense jeweled mirror like finish of our rods does not pick up and carry abrasive grit or dirt through the bore. This makes the Pro-Shot micro polished rod the best type of gun cleaning rod to use. Micro polished hardened stainless steel will...

This 2-Piece set is for seating .224 caliber bullets into our .30 caliber sabots without damaging the bullet tips or the sabots. By using this die and sabot holder in your reloading press, you can be sure you are seating your bullets into your sabots...

375 Winchester Brass for Reloading  Our 375 Win brass is made from brand new, unfired 30-30 brass. The headstamp reads "30-30 Win"*. As you probably know, original 375 Winchester headstamped brass is awfully hard to come by. We have developed a...

Redding T-7 Turret Press with Primer Arm   The design criteria was to create the ultimate turret press. Our engineering team started with our time proven cast iron construction and turret support that is second to none. They added powerful...

Pro Shot Bronze Bore Brushes for Gun Cleaning  Bronze brushes scrub rifle bores without damaging the rifle bore surface... That's because bronze is softer than steel... But That's Not All! Pro Shot Bronze Bore Brushes have a unique brass core... So...

Hornady V-Max .20 cal 32 gr. Bullets (100/box) With its combination of proven materials, innovative design and streamlined profile, the Hornady® V-MAX® represents the pinnacle of what a specialized varmint bullet can achieve, offering...

219 Donaldson Wasp Brass (Long Version - 50 pcs)  Custom, fully formed reloading brass for 219 Donaldson Wasp fits Model 97D Rifles and other guns chambered for the EABCO 219 Donaldson Wasp cartridge (long version). This is "wildcat" brass, formed...

  Custom, fully formed reloading brass for 6mm BRM fits Model 97D Rifles and other guns chambered for the EABCO 6mm BRM cartridge. This is "wildcat" brass, formed from virgin (unfired) 30-30 brass using our secret process that results in a...

300 BRM Brass (100) - Brass for 300 Bench Rest Magnum. All of our brass is made from 30-30 bulk brass. It is formed and trimmed to length. You should expect to full length size it and some minor trimming might be in order. 7-30 and .375 and the BRMs are...

Custom Formed 7-30 Waters Brass (50)Originally developed (by Ken Waters) as a faster and flatter shooting flat nose cartridge for Winchester lever action rifles, the 7-30 Waters has gained wider popularity among handloaders who shoot spitzer bullets in...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made. Find more info on these cartridges, dies, and...

Extreme Elite Bullets -  The Extreme Elite Bullet represents the "very best value" in an all-lead hunting and target bullet. It delivers outstanding accuracy with Encore and Omega 209X50 rifles. The 330 and 360 gr saboted bullets are optimum for the...

Custom Loaded 6.5mm BRM Loaded Ammunition 140gr Hornady ELD Match Custom loaded 6.5mm BRM ammo, 20 rounds in a re-usable plastic carrying case. EABCO Custom 6.5mm BRM Brass, loaded with VihtaVuori powder, Benchrest Primer, and Amax match grade hunting...

Dead Center Duplex Bullets -   Duplex Dead Center Bullet - Shoots a .357 caliber Dead Center bullet from your 50 caliber muzzle loader. A seemingly crazy idea that seats a high BC .357 caliber Dead Center bullet into a sabot-within-a-sabot...

The fact is well-known that nothing surpasses 100% COTTON FLANNEL FABRIC for purposes of absorbing foreign matter and residue, and in turn carry it through the BORE with the LEAST amount of abrasive contact to the barrel's rifling.  Available in...

Pro Shot Rod Stop keeps your cleaning rod from going too deep. Standard on this is for the .22-.26 caliber cleaning rods. We also have them for .27 caliber rods. That part #715-ST2

Custom 7mm BRM Brass for Reloading (50). All of our brass is made from 30-30 bulk brass. It is formed and trimmed to length. You should expect to full length size it and some minor trimming might be in order. 7-30 and .375 and the BRMs are a little...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made. Find more info on these cartridges, dies, and...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made by Lee Precision. Find more info on these...

Sabot Neck Flaring DieThis is actually a Lee Neck Flaring Die. It makes seating saboted bullets into case mouths smoother, and less likely to damage the heel of the sabot. Run your cases into this die, then load with your saboted bullets using your...