Bipods & Rests

Oryx Full Length Forend ARCA Rail- Converts your Oryx chassis stock to mount on bipods, tripods, etc... with the ARCA rail system. Specially contoured to fit the forend taper and M-Lok slots for a perfect flat bottom with ARCA compatible dovetail style...

Harris Bipods #14 Ruger Mini 14 Stud Adapter- Provides a swivel stud bipod attachment for the Ruger Mini 14 and Mini 30. Also Ranch Rifles except series 180 and Ruger folding stock models. Includes a slot for a carrying sling in addition to the swivel...

Harris Bipods #4 Barrel Clamp AdapterClamps to gun barrels and provides a swivel stud and bipod mounting surface. Not recommend for shoulder fired guns. Mounting bipods directly to rifle barrels will affect accuracy and/or change your sight-in zero. Best...

Harris Bipods #9 Adapter for Flat Bottom Forends- Allows mounting any Harris bipod on flat bottomed forends. This adapter holds the bipod in proper alignment. Fits benchrest type forends from 2-4 inches wide. Requires a swivel stud on the forend. E...

Harris Bipods #3 Adapter fits Remington 4, 74, 7400The #3 Bipod Adapter creates a solid swivel stud bipod mounting point on Remington semi-automatic rifles. Attaches at the end of the forend, replaces the forend screw. E. Arthur Brown Company, Inc4088...

Choate Long Bipod Lug Sliding lug with swivel stud and locking wing nut fits the accessory rail on the bottom of the forend of Choate Sniper and Varmint Stock. Solid and handy swivel stud mounting point for Harris bipods. Wing nut allows you to unlock,...

Choate Short Bipod Adaptor/Swivel Stud  A shorter, lower bipod adapter that fits the forend rail of our Sniper, Varmint and Tactical stocks, lets you install a Harris bipod so that it tightens against the forend so there is not side to side movement...

Harris Bipods #5 Colt AR15 Adaptor Stud- Fits the Colt AR-15 round handguard without modification. Provides a swivel stud bipod mounting point. Swivel is included. E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

Harris Bipods #2 Flat Flange AdapterThe purpose of this big headed flange nut is to provide more support for installing a sling swivel stud in thin walled synthetic or plastic rifle forends. Your Harris Bipod attaches to the forend using the sling swivel...

Harris Bipods #2A Flange AdapterThe purpose of this wide headed flange nut is to provide more support for installing a sling swivel stud in thin walled synthetic or plastic rifle forends. Your Harris Bipod attaches to the forend using the sling swivel...

Harris Bipods #2R Radiused Flange AdapterThe purpose of this big headed flange nut is to provide more support for installing a sling swivel stud in thin walled synthetic or plastic rifle forends. Your Harris Bipod attaches to the forend using the sling...

Harris Bipods #6 Euro Rail Stud Adapter- Slides a swivel stud into the adapter rail on the bottom of target rifle forends. This one fits the European sized rail slot (about 3/8 inch). It has a lock screw to hold it in position when your bipod is not...

Harris Bipods #6A USA Rail Stud Adapter - Slides a swivel stud into the accessory rail on the bottom of target rifle forends. This one fits the USA sized rail slot (about 5/16 inch). It has a lock screw to hold it in position when your bipod is not...

Harris Bipods #8 XP100 Plastic Stock Stud Adapter - Solid bipod mounting swivel stud kit for the Remington XP100 handgun. Original plastic stocks for the Remington XP100 can be adapted to the Harris bipod with this kit. IN addition to the special stud,...

Oryx Sling Swivel Stud Assembly- Original Self Threading Swivel stud that screws into the existing forend hole on older Oryx Chassis forends. New Oryx chassis will need a backing nut to attach this stud to the forend hole. For use in sling attachment as...

Universal Swivel Stud Kit   Includes 1 machine screw swivel stud and 2 wood screw swivel studs. Usually the machine screw stud goes in the forend and is backed by the nut (included) and shortened to fit. The wood screw stud usually goes in the...

Harris Bipod Adapter This Harris style bipod adapter has a retractable sling stud for mounting Harris and most other folding bipods onto a standard Picatinny/Weaver/STANAG rail. It's made of 6061-T6 aluminum and measures 2" in length. More form fitting...

Harris Bipods #7A Spacer Adapter- An angled rubber spacer that may allow mounting of bipods on thin forends and schnable forends. Simple design is reversible to change the angle of your bipod. E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield,...