Universal Forend Screw KitReplacements For Original and Contender G2 Forends- The screws are in lengths we use here in the shop. The spacer washers solve the problem of screws bottoming out before the forend is completely tight. With this kit, you should...

Universal Shotgun Forend Screw Set for Encore and Pro HunterT/C Shotgun forends use slightly different screws for 20 ga. and 12 ga. If you have lost one or both screws, this kit will get you back up and running. This kit includes one shorter screw 0.75",...

Extended Eye Relief Scope Base for TC Contender/G2  Fits TC Contender and G2 barrels. This new mount extends forward to give longer eye relief when mount a riflescope on your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel...

Volquartsen Forward Blow 10/22 Compensator1/2x28 Threads Fit Volquartsen, EABCO, and Tactical Solutions Barrels   Volquartsen's "Forward Blow" 10/22 Compensator is designed to stabilize the muzzle while directing noise away from the shooter. It has...

This kit contains everything you need to complete your lower receiver except the buttstock assembly, pistol grip and bolt, FCG, mag release assembly, and bolt catch/release. It contains all the small parts and springs needed with the exclusion of the...

An alternative to the G.I. Stock. Made of tough fiberglass polymer. This is the same material the army uses on their rifles. Our stock adds 3/4" to the length of pull and almost doubles the amount of storage space. This stock also features an "Off Hand"...

The standard issue M-16/AR-15 stock is too short for some people. This pad lengthens the stock by 1 1/4". Made of black fiberglass filled plastic and installs in minutes using a screwdriver and a 5/32" allen wrench.

The Remington 870 Side Folding Stock must be used with the minimum length forend, which is included with Stock. The stock is made of 4140 steel, fiberglass filled plastic and come with a 3/4" recoil pad and sling loops.

Hogue AR-15 Free Float Hand Guard7'' w/Knurled Aluminum Gripping Area, Black- This is a 7'', Free Floating, precision machined, aluminum hand guard for your AR-15... It gives your AR-15 a a very high quality look and feel. Free floating eliminates hand...

If you are looking for a less expensive solution to making your shotgun a tactical entry or home defense weapon, then we have the forend for you. This forend kit includes a forend with pre-drilled holes and a 1-1/2 inch piece of picatinny rail. To attach...

An M1 Carbine Replica Canvas Gun Case that fits the Ruger 10/22, M1 Carbine, and other rifles of similar dimensions (fits rifles up to 36" long). Available in a  lined version that still looks authentic but gives better padding and...

TC Hot Shot Scope Mounting Base  Custom Weaver style Base for the Thompson Center Arms Hot Shot 22LR Mini Encore youth rifle. Fits any Weaver style scope mounting rings. Pictured above with a very reasonably priced Hawke Red Dot sight. Mount this...

Slip-Over Scope Mount for Ruger #1 Weaver Style Scope Base Slips Over Ruger No. 1 Rib  Our new "Slip-Over" Ruger #1 scope mount solves the problem of aligning an after market scope base on a contoured barrel... It uses the factory pre-aligned rib as...

Hogue Overmolded AR-15 Grip   The Hogue OverMolded® AR-15 grip is specially designed to retain the important lines and aesthetics of the AR, while at the same time providing a comfortable, lightweight rubber grip with finger grooves and...

  Barrel droop or barrel sag is a consideration when you're seeking optimum accuracy and scope alignment with the Ruger 10/22. The standard slip-fit of the barrel to the receiver can be drawn or pulled downward as it is tighten onto the receiver...

Main Spring Assemblies for Ruger Mk II, IIIPrecision made replacement for factory main spring assembly. Wire EDM and CNC machined to give the best fit and performance. Mk II and III version differs from 22/45 version due to grip angle difference in the...

Ruger 10/22 Titanium Extractor Claw is Sharp and ReliableThis extractor is harder and sharper than the factory original extractor... An excellent choice for replacement or repair of your original Ruger 10/22 extractor.  Includes spring.

Savage Tactical Varmint Scope Mount LA (Long Action) Silver  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

Savage Tactical Varmint Scope Mount LA (Long Action) Black  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

Savage Tactical Varmint Scope Mount SA (Short Action) SilverOur new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several advantages...-...