E. Arthur Brown Co

Thread Barrel for Customer's Muzzle Brake or Suppressor.  If you have your own muzzle brake or suppressor, this is what we charge to thread the muzzle of your barrel to fit. We need to know the thread pitch (i.e. 1/2 x 28, 5/8 x 24, etc) plus the...

EABCO Charge to Fit the Barrel Channel Stock/forend channeling service for heavier barrel upgrades - this could be for your Ruger 10/22, Savage, Encore or others.  If it does not work with the stock you select on your order, we will contact you and...

EABCO shop charge for installing customer's swivel studs.

EABCO shop charge for installing customer's riflescope.

EABCO Installation Charge for installing Hicks Accurizer into Ruger #1 Rifle.

Cut and Recrown 11 degree Target Crown Our expert gunsmiths take care and detail with each barrel they work with.  Accuracy is a priority, so proper cut and recrown requires proper centering and alignment. The crown of a barrel is is extremely...

Savage Barrel Installation ServicesOur Skilled Gunsmiths can Headspace and Install Barrels... Channel ForendsWe'll set up your headspace for the best accuracy and reliable ammunition fit and function. Then we'll double check it with the best SAAMI spec...

$15 General Installation Charge for installing a #2 Harris Bipod Adaptor on a TC Composite Forend. Order the Adaptor separately and forend separately.

Drill and Tap for sight hole or forend screw hole. This charge is per hole.