E. Arthur Brown Co

Ruger MKII/MKIII 22/45 Magazine Base Pad- Add some extra seating power to your Ruger Mark II & Mark III 22/45 magazines and customize the looks and handling of your gun at the same time! These 22/45 Magazine Bumpers add some length to your magazines...

EABCO Ruger 10/22 Scope MountPrecision Machined Weaver Style Scope Mounting Base Black  Our EABCO Ruger 10/22 Scope Mounting Base is precision machined to optimize the base for the very best ring engagement, alignment, and rigidity. No molding or...

Universal Shotgun Forend Screw Set for Encore and Pro HunterT/C Shotgun forends use slightly different screws for 20 ga. and 12 ga. If you have lost one or both screws, this kit will get you back up and running. This kit includes one shorter screw 0.75",...

Extended Eye Relief Scope Base for TC Contender/G2  Fits TC Contender and G2 barrels. This new mount extends forward to give longer eye relief when mount a riflescope on your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel...

Pro Hunter "FlexTech" Muzzle Loader Forend Screws and Washers The TC Factory Pro Hunter "FlexTech" forend for muzzle loaders has two screws of different length (2 washers also included). If you've lost one or both screws or washers, this kit supplies...

M142 Military Uniform Boot Socks Hot weather, Extra cushioned sole in OD Green Color. Made with 80% Cotton and 20% Stretch Nylon. Available in two sizes; medium and Large.Sock to Shoe Size Conversions Sock SizesMED8 1/2-11LG10-13XLG13-15Men's Shoe...

$15 General Installation Charge for installing a #2 Harris Bipod Adaptor on a TC Composite Forend. Order the Adaptor separately and forend separately.

An M1 Carbine Replica Canvas Gun Case that fits the Ruger 10/22, M1 Carbine, and other rifles of similar dimensions (fits rifles up to 36" long). Available in a  lined version that still looks authentic but gives better padding and...

TC Hot Shot Scope Mounting Base  Custom Weaver style Base for the Thompson Center Arms Hot Shot 22LR Mini Encore youth rifle. Fits any Weaver style scope mounting rings. Pictured above with a very reasonably priced Hawke Red Dot sight. Mount this...

Slip-Over Scope Mount for Ruger #1 Weaver Style Scope Base Slips Over Ruger No. 1 Rib  Our new "Slip-Over" Ruger #1 scope mount solves the problem of aligning an after market scope base on a contoured barrel... It uses the factory pre-aligned rib as...

Savage Tactical Varmint Scope Mount LA (Long Action) Silver  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

Savage Tactical Varmint Scope Mount LA (Long Action) Black  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

Savage Tactical Varmint Scope Mount SA (Short Action) SilverOur new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several advantages...-...

ScopeRib III Sight System for Handgun Silhouette- Match grade, long range pistol sights combined with a scope mount so that you don't have to disturb the alignment of your sight system when using a scope to work up hand loads.- The ScopeRib III Sights...

Original S-Lever® Tensioner for S-Type Harris and Caldwell XLA Bipods - The Harris and Caldwell XLA "S" type bipods allow you to tilt or cant your rifle side to side to level your crosshairs. It's a great system. However, the friction tensioning...

The standard Encore forend screws (one long screw 0.785", one short screw 0.475") fit the Encore Rifle Forends (Not the Pro Hunter Rifle Forends). Note:  The standard Encore PRO HUNTER screws (two long screws) work on the Encore Pro Hunter (Flex...

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

Drill and Tap for sight hole or forend screw hole. This charge is per hole.

  Our M1 Carbine Sling with Oiler is completely faithful to the early horseshoe type 1st issue slings. These dot the eye fastener, khaki web slings are exactly as per the original WWII issue. The oiler has the shaped dipper and gasket. For those who...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...