E. Arthur Brown Company

ScopeRib III Silhouette Sights for Thompson Center Contender

(9 reviews) Write a Review
  • ScopeRib III Silhouette Sights
  • Bond Hooded Front Sight
  • ScopeRib III Front Sight
  • ScopeRib III Rear Sight
  • Bond Hooded Front Sight


ScopeRib III Sight System for Handgun Silhouette
- Match grade, long range pistol sights combined with a scope mount so that you don't have to disturb the alignment of your sight system when using a scope to work up hand loads.
- The ScopeRib III Sights for IHMSA and NRA Handgun Metallic Silhouette are an advancement over our famous ScopeRib I Sight System. The ScopeRib III incorporates our KeyLock scope base design with a precision handgun sight system that fits 10", 10¾", 12", 14", and even 15" TC Contender and G2 barrels, and BF Pistols.
Just look at these features:
- Rear Sight Features 1/2 MOA precision click adjustments (1/2" per click at 100 yds).
- Sharp, square sight notch in notch widths to suit your vision and application: .032", .062", .080" (most popular), and .100". Choose Narrow for Taco-Hold, Wider for traditional Creedmoor and Standing Positions (choose from the Drop Down Menu above...).
- Mounts to factory 4-hole as well as custom 6-hole scope mounting screw holes.
- Original "Bond" Hooded Front Sight: Adjustable post for width AND height.
The ScopeRib III Sight System fits TC Contender and G2 barrels as well as BF Pistols. It includes the ScopeRib III rear base with precision adjustable sight AND the Bond hooded front with adjustable post. A Longer Hood is also available for an additional charge. Order quick detachable See-Thru Rings separately.

View AllClose

Additional Information

Item Type:
Item Type:
Base, Rail, Mount
TC Contender
G1 and G2 Contender
BF Pistol
E. Arthur Brown Company
Ships Internationally
EABCO ScopeRib
View AllClose

9 Reviews

  • 5
    Perfect once again

    Posted by MM Auto Spa on Jun 28th 2023

    As with all your parts they are high quality and look great

  • 1
    False advertising

    Posted by Benjaman caviness on Oct 21st 2020

    The add specifically states the sights fit a 14 inch barrel, what it doesn't state until you get the sights is that you will have to visit a gunsmith to have the barrel drilled and tapped for the front sight. These sights definitely weren't made with this gun in mind

  • 2
    Poor support

    Posted by Jeff on Jun 24th 2020

    Prompt shipment. Easy installation. Shoots very high. Adjusted rear sight to limit still need to aim 12” low. Fiber optic front would be drastic improvement. Called main number customer service could not answer any questions. Asked me to call again in the afternoon when tech is in.

  • 4

    Posted by Jay Critchfield on Feb 22nd 2019

    Rear sight is a flat base Kensight silhouette attached to a modified EABCO weaver rail. The rear sight is high quality with positive clicks and repeatability. The front post is adjustable in width and height. I have installed this sight system on three different brands of barrels and everyone the screws were too long for the front sight by about a thread and a half. I give it only 4 stars for the outdated Weaver rail used for the rear sight. The slots for the rear rail should be updated to the more common Picatinny rail spacing and dimensions which offer I wider variety of mounting solutions for scopes or reflex sights.

  • 5

    Posted by Ron on Jun 27th 2018

    This sight rib is everything my friends said it would be. The sight picture is very easy to get on target and the front sight is adjustable in that you can set it at the correct angle for your eye. I would recommend this to all my friends. Very satisfied.

  • 5

    Posted by PAUL CHOUINARD on Jun 29th 2015


  • 4
    Sight review

    Posted by Rodney on Jun 27th 2015

    This sight was easy to install and looks great, have not yet shot heavy rounds thru the gun yet to see if it holds.

  • 5
    Great sights

    Posted by Melvin Calliham on Apr 15th 2015

    A quality sight system for us silhouette shooters. The rear sight base is a quality unit, and the Bomar clone rear sight has positive clicks, and is very repeatable. Everything fit like it was supposed to without any modifications

  • 5
    ScopeRib III Sight System

    Posted by Christopher Coombes on Feb 27th 2015

    The EABCO ScopeRib III sight system is one of the nicest sight systems that I have used, the rear sight is a high quality Kenlite target sight mounted to a very solid weaver style base, and the front sight and hood are strong and solid as well. I use this with B-Square high see-through rings and a Burris 1.5-4x pistol scope, and it works perfectly to still allow easy use of the open sights.

View AllClose

Recommended for You