E. Arthur Brown Co

  Custom, fully formed reloading brass for 6mm BRM fits Model 97D Rifles and other guns chambered for the EABCO 6mm BRM cartridge. This is "wildcat" brass, formed from virgin (unfired) 30-30 brass using our secret process that results in a...

Universal Swivel Stud Kit   Includes 1 machine screw swivel stud and 2 wood screw swivel studs. Usually the machine screw stud goes in the forend and is backed by the nut (included) and shortened to fit. The wood screw stud usually goes in the...

Single Shot Followers for Popular Rifles WHY Use a Single Shot Magazine Follower? - For best accuracy potential, bullet seating depth should be dictated by the length of your chamber, not your magazine. Our Benchrest Followers convert your bolt action...

Original Military GradeKMW Pod-Loc™ Harris S Bipod Lever- The KMW Pod-Loc™ Tension Lever replaces the friction tensioning knob on Harris S Series Bipods. Adopted by military and police sniper units all over the world, the Pod-Loc™ has earned a solid...

300 BRM Brass (100) - Brass for 300 Bench Rest Magnum. All of our brass is made from 30-30 bulk brass. It is formed and trimmed to length. You should expect to full length size it and some minor trimming might be in order. 7-30 and .375 and the BRMs are...

Custom Formed 7-30 Waters Brass (50)Originally developed (by Ken Waters) as a faster and flatter shooting flat nose cartridge for Winchester lever action rifles, the 7-30 Waters has gained wider popularity among handloaders who shoot spitzer bullets in...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made. Find more info on these cartridges, dies, and...

  Taco Hood for the Bond Front Sight used in handgun metallic silhouette competition. This is a 5" long tube that replaces the original short Bond hood-tube. Note: This is only the hood... It fits on your Bond Front Sight.

Custom Loaded 6.5mm BRM Loaded Ammunition 140gr Hornady ELD Match Custom loaded 6.5mm BRM ammo, 20 rounds in a re-usable plastic carrying case. EABCO Custom 6.5mm BRM Brass, loaded with VihtaVuori powder, Benchrest Primer, and Amax match grade hunting...

Hicks Ruger Number One Accurizer  Adjusts harmonics to achieve the accuracy sweet spot for your Ruger No.1. The main spring hanger bar that extends out under the barrel from the Ruger #1 receiver can be turned into a harmonic accuracy...

Ruger 10/22 Accuracy Firing PinWider Impact Surface Disrupts the Rim Less, Improves Accuracy Potential  Firing pin impact plays a critical role in the accuracy of rimfire cartridges. For example, the Russians developed a 2-pin system that dominated...

  These are the standard forend screws that fit Encore 24 and 26 inch barrels as well as Prohunter 28 inch barrels. New forends include these screws so, if you are ordering a new forend, you do not need to order these screws. We offer the ...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made. Find more info on these cartridges, dies, and...

This is an add-on item to use with your existing rifle sling. It's a quick release adjustable second sling that goes over the other shoulder. This allows you to carry your rifle like a backpack with no worries about it slipping off your shoulder.

Originally developed for the military, the OPS Muzzle Brake is the result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. Excellent for big game as well as varmint cartridges (...

Encore Muzzle Loader Forend HardwareFor Factory Walnut and EABCO Laminate Muzzleloader Forends   All the hardware needed to attach the Encore Laminate or Factory Walnut Muzzle Loader forend. Includes the leaf spring rod retainer with screw, and...

Wipe-Out Bore Foam Gun Cleaner is different, but easy to use. Point the nozzle down the bore and squirt. The barrel instantly fills with expanding foam that penetrates every nook and cranny. Wait an hour and then just Wipe-Out the bore with a cleaning...

TC Original/SSK-50 and G2 Pistol Forend for 14" Pistol barrels- Black. Rubber  Modified to fit both the Original & G2 Style Contender with non-tapered bull barrels. This one is for 12-14" barrels. Screw hole spacing approx. 3 1/8".  It is a...

EABCO Custom Reloading Dies   These are specially commissioned reloading die sets including a Custom Full Length Sizer/Decapper Die and an In-Line Bullet Seater Die. The sizing dies are custom made by Lee Precision. Find more info on these...

EABCO Ruger 10/22 Match Grade Accuracy Barrel - 18" Blued, Threaded Our EABCO Threaded 10/22® Accuracy Barrels® have threaded 1/2x28 muzzles to fit Muzzle Brakes and suppressors. Custom thread protectors are included... Order muzzle brakes...