RUGER MARK III 22/45

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIII and 22/45 to the next level? Look no...

The Titan Extended Magazine Release for Ruger® Mark IV™ is a simple, drop-in replacement for the smaller factory magazine release, and offers significantly more surface area and height to boost the consistency and speed of magazine changes...

Picatinny Rail for Ruger MK IV This rail can be mounted in two directions, allowing the rear sight to stay mounted; when reversed, it will cover the rear sight dovetail. Fits factory Ruger MKIII and MK IV uppers. Mounts in Two Directions Fits Ruger MKIV...

Lowey Barrel Tuner 1/2x28 - The tuner is an adjustable muzzle weight. With it, you can precisely adjust the location/position of the weight to optimize the harmonics of your barrel and ammunition. The mounting body fits any pre-threaded 1/2x28 muzzle...

Majestic Arms American Walnut GripsAmbidextrous and Checkered for Ruger Mark III 22/45- Classic, checkered American Walnut wood grips, fit the Ruger Mark III 22/45 pistols. The checkering is edge to edge and just as beautiful as the wood. American Walnut...

Volquartsen 19.22 Flat Trigger The 19.22 Trigger for Ruger MKII, MKIII, and MKIV enhances your shooting experience. It is designed to bring the world-class 1911 trigger feel to the Ruger MK series. Its mechanical advantage provides a crisp 90-degree...

Ruger MK I, II, III, and 22/45 Performance Pak - Springs Extra Power Recoil Spring Extra Power Firing Pin Spring Reduced Power Hammer Spring Reduced Power Trigger Spring Fit: Ruger Mark I, II, III, and 22/45 Upgrading your Ruger pistol with these...

The Titan Extended Magazine Release for Ruger® Mark IV™ 22/45™ is a simple, drop-in replacement for the smaller factory magazine release, and offers significantly more surface area and height to boost the consistency and speed of magazine...

Scorpion LLV Compensator A unique pistol comp designed for Scorpion Pistols and their Scorpion LLV barrels. CNC-machined from billet material to match the upper profile and then finished to match. A captive, knurled nut secures the compensator to the...

Mark IV™, Mark III™ & 22/45™ Picatinny Rail Factory 1913 style picatinny rail for Mark IV™, Mark III™ and 22/45™. Rail fits firearms with factory pre-drilled receivers. Includes three screws. (Does not fit Mark I and Mark II™ pistols.) Genuine...

Volquartsen Gold* Trigger fits Ruger MKII, MKIII, and MKIV Pistols and 22/45CNC-Machined Target Trigger in *Gold Colored TiN Adjusts for Pre-Travel and Post-Travel - The Volquartsen Target Trigger is now available in TiN finish, giving it a distinctive...

Main Spring Assemblies for Ruger Mk II 22/45 and Mk III 22/45 PistolsPrecision made replacement for factory main spring assembly. Wire EDM and CNC machined to give the best fit and performance. Mk II and III version differs from 22/45 version due to grip...

High Fiber Optic HiViz Front Sight gives Faster Sight Acquisition- Whether you are hunting or plinking, its often hard to see your front sight against outdoor backgrounds. The fiber optic core of this HiViz front sight puts a bright glowing dot on your...

Low Fiber Optic HiViz  Front Sight Gives Faster Sight Acquisition- Whether you are hunting or plinking, its often hard to see your front sight against most outdoor backgrounds. The fiber optic core of this HiViz front sight puts a bright glowing dot...

Ruger MK I, II, III & IV Fiber Optic Adjustable Rear Sight Improve the performance of your Ruger MK I, II, III and IV with the new adjustable rear sight. Our bright and fully adjustable rear sight will enhance your confidence and shooting experience...

"Green Springs" Magazine Springs for Ruger® MK Series (3-PACK)Shot-peened spring offers longer life than factory springReduces failure-to-feed issuesReplaces old, broken mag springsUpgrade your Ruger® MK series magazines with aftermarket...

Adjusts for High or Low Velocity AmmoVolquartsen Recoil Rod and Spring Kit- Provides the best spring tension for reliable function with high or low velocity ammo. This innovative design makes it quick and easy to match your spring weight to your ammo of...

Ruger Mark II/III and 22/45Volquartsen Scorpion LLV Competition Pistol Barrel- Black 6'' Scorpion LLV replacement barrel (upper) for Ruger Mark II, III, and 22/45 pistols. A CNC-machined billet aluminum receiver is the foundation of this lightweight...

Ruger Mark II/IIILLV Competition Pistol Upper- Black 4.5'' model LLV replacement barrel (upper) for Ruger Mark II and Mark III pistols. A CNC-machined billet receiver is the foundation of this lightweight setup. The receiver and barrel shroud are...

Volquartsen Competition Bolt for Ruger Mk II, III, and IVEliminate stovepipes, failures to fire and improve the overall performance of your Ruger Mark II, III*, IV or Mark IV 22/45 pistol with this Competition Bolt! (* MKIII must remove chamber indicator...