RUGER MARK III 22/45

Steel Game Changer Pro Compensator by Tandemkross- Screw on muzzle brake for Ruger MK pistols, SW22 Victory Pistols, Browning Buckmark, and more. Uses existing 1/2x28 muzzle threads. Unique indexing method uses an O-ring for finger-tight,...

Maximus Plus1 Followers for Ruger® MK Series Magazines (2-PACK)- Replacement magazine followers that increase magazine capacity from 10 rounds to 11 rounds. The TANDEMKROSS “Maximus” Plus1 Follower for the Ruger® MK series is a drop-in upgrade...

Volquartsen VC2AK-S-ST Accurizing Kitfor Ruger Mark II, III, and 22/45, Silver/Stainless Trigger- Drop In Target Grade Accurizing Kit with silver extended bolt release and stainless trigger to provide a crisp, clean 2.25lb trigger pull (pull may vary...

Halo Charging Ring for Ruger® Mk III/Mk IV® & 22/45   The Halo is an easy to grip "pull ring" that attaches to your Ruger Mk III/Mk IV bolt. It makes it easy to pull the bolt back for anyone... Big or small, strong or weak...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel extractor for better function and reliability. The Exact...

Tandemkross "Victory" Trigger, BlackReplacement for Ruger Mk III and Mk IV 22/45Features at a Glance:Flat faced for better control and feel100% Adjustable for pretravel and overtravelLightweight skeletonized designFits MKIII or MKIV, Original or...

Tandemkross Mark III (22/45) Hammer Bushing for Magazine Disconnect-Stainless SteelCompatibility: MKIII -ALL MODELS MKIII 22-45 MKIII 22-45 Competition MKIII 22-45 Government Target MKIII 22-45 Target MKIII Competition MKIII Government Target MKIII...

Game Changer Rimfire Compensator  The Game Changer has gas ports on the top and sides so it stabilizes the muzzle and virtually eliminates muzzle rise. With no ports on the bottom, it's important to mount the game changer with the ports...

Hogue MKII/MKIII & 22/45 OverMolded Rubber Grip Finger Grooves Durable synthetic rubber, perfect for recoil absorbing without affecting accuracy.  Modern molding process and flexibility of materials results in superior grips that out perform...

Ruger Mk II/III 22/45 Magazine Bumper Pads...Dump Your Empty Mag, Then "BUMP" One of These for Fast, Secure Reloads!   Made by economical molded plastic construction, the 22/45 magazine base bumper pad looks and functions just like the ones...

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory dovetail, locks in place with two set screws. Made of...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

Volquartsen SureStrike Firing Pin for Ruger MK I, II, III and IV (Including 22/45)   This SureStrike firing pin is designed to eliminate light strikes on the Ruger MK I, II, III and IV pistols (including 22/45). Machined .004" wider than...

Fits Tactical Solutions Pac-Lite Barreled Uppers for Ruger MK Series Pistols. Please note: This base will not work on Factory Ruger Mk Series Pistols as the thread pitch is different for factory base screws.

Ruger MKII/MKIII 22/45 Magazine Base Pad- Add some extra seating power to your Ruger Mark II & Mark III 22/45 magazines and customize the looks and handling of your gun at the same time! These 22/45 Magazine Bumpers add some length to your magazines...

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...

McFadden Ultimate Clip Loader for Ruger Mk II/III/IV Pistols-The Ultimate Clip Loader is for speed loading Ruger Mk II, III, IV, and 22/45 Magazines. Load the hopper with up to 50 rounds of 22 ammo. Shake the loader to align the shells. Then just slip...

Volquartsen Assembled Lower Frame for Ruger Mark II, Mark III, 22/45A Completely Assembled Lower Frame Replacement... Includes Volquartsen Accuracy System Internal Parts  Our Volquartsen Custom 1911 Style Frame is CNC machined from aluminum alloy...

Ruger Mark Series Ambidextrous Combat Low-Rise Holster. Shooters demanded it; this holster is designed to fit the Ruger® Mark Series (MK-I, MK-II, MK-III, MK-IV & 22/45) .22LR pistols with or without an optic or a suppressor. This...

Pistol Competition Kit, MKIII, Gold Flat Trigger The Volquartsen Pistol Competition Kit for your Ruger Mark III is an upgrade on top of an upgrade on top of an Upgrade. It starts with the original Mark III Acurrizing Kit. A Bolt Tune Up Kit is added...