Ruger Mark III 22/45®

Pac-Lite Compensator for 22 LR The PAC-LITE Compensator is designed to complement TacSol PAC-LITE Barrel upgrades for Ruger® Mark series and 22/45® pistols. Engineered with 360° ports, these compensators effectively reduce muzzle rise while...

Ruger Mark Series Ambidextrous Combat Low-Rise Holster. Shooters demanded it; this holster is designed to fit the Ruger® Mark Series (MK-I, MK-II, MK-III, MK-IV & 22/45) .22LR pistols with or without an optic or a suppressor. This...

Game Changer Rimfire Compensator  The Game Changer has gas ports on the top and sides so it stabilizes the muzzle and virtually eliminates muzzle rise. With no ports on the bottom, it's important to mount the game changer with the ports...

Volquartsen Machined Disconnector for Ruger Mk II/III PistolsThis new Volquartsen disconnector is CNC Machined for a better fit and function over the stamped factory disconnector.  The additional width of this new disconnector gives increased...

The Titan Extended Magazine Release for Ruger® Mark IV™ 22/45™ is a simple, drop-in replacement for the smaller factory magazine release, and offers significantly more surface area and height to boost the consistency and speed of magazine...

Volquartsen SureStrike Firing Pin for Ruger MK I, II, III and IV (Including 22/45)   This SureStrike firing pin is designed to eliminate light strikes on the Ruger MK I, II, III and IV pistols (including 22/45). Machined .004" wider than...

McFadden Ultimate Clip Loader for Ruger Mk II/III/IV Pistols-The Ultimate Clip Loader is for speed loading Ruger Mk II, III, IV, and 22/45 Magazines. Load the hopper with up to 50 rounds of 22 ammo. Shake the loader to align the shells. Then just slip...

Ruger MK II/III/IV Picatinny Scope Mount Rail by Majestic ArmsLow Profile Does Not Interfere with Iron Sight Picture!  Precision machined, true Mil-Spec Picatinny Rail for mounting a scope, red dot, or laser on your Ruger MK Pistol. Fits Ruger Mk I,...

Bolt Racker Handle for Ruger Mk I, II, III, IV and 22/45Study the Pictures to Match Your Bolt to the Correct "Type" Bolt Racker  The Bolt Racker Handle makes cocking and clearing the action SO EASY. Install it either left or right handed and we have...

Hogue MKII/MKIII & 22/45 OverMolded Rubber Grip Finger Grooves Durable synthetic rubber, perfect for recoil absorbing without affecting accuracy.  Modern molding process and flexibility of materials results in superior grips that out perform...

Adjusts for High or Low Velocity AmmoVolquartsen Recoil Rod and Spring Kit- Provides the best spring tension for reliable function with high or low velocity ammo. This innovative design makes it quick and easy to match your spring weight to your ammo of...

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...

Mark IV™, Mark III™ & 22/45™ Picatinny Rail Factory 1913 style picatinny rail for Mark IV™, Mark III™ and 22/45™. Rail fits firearms with factory pre-drilled receivers. Includes three screws. (Does not fit Mark I and Mark II™ pistols.) Genuine...

Maximus Plus1 Followers for Ruger® MK Series Magazines (2-PACK)- Replacement magazine followers that increase magazine capacity from 10 rounds to 11 rounds. The TANDEMKROSS “Maximus” Plus1 Follower for the Ruger® MK series is a drop-in upgrade...

Ruger MK I, II, III, and 22/45 Performance Pak - Springs Extra Power Recoil Spring Extra Power Firing Pin Spring Reduced Power Hammer Spring Reduced Power Trigger Spring Fit: Ruger Mark I, II, III, and 22/45 Upgrading your Ruger pistol with these...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel extractor for better function and reliability. The Exact...

"Green Springs" Magazine Springs for Ruger® MK Series (3-PACK)Shot-peened spring offers longer life than factory springReduces failure-to-feed issuesReplaces old, broken mag springsUpgrade your Ruger® MK series magazines with aftermarket...

Tandemkross Mark III (22/45) Hammer Bushing for Magazine Disconnect-Stainless SteelCompatibility: MKIII -ALL MODELS MKIII 22-45 MKIII 22-45 Competition MKIII 22-45 Government Target MKIII 22-45 Target MKIII Competition MKIII Government Target MKIII...

Ruger MKII/MKIII 22/45 Magazine Base Pad- Add some extra seating power to your Ruger Mark II & Mark III 22/45 magazines and customize the looks and handling of your gun at the same time! These 22/45 Magazine Bumpers add some length to your magazines...

Ruger Mk II/III 22/45 Magazine Bumper Pads...Dump Your Empty Mag, Then "BUMP" One of These for Fast, Secure Reloads!   Made by economical molded plastic construction, the 22/45 magazine base bumper pad looks and functions just like the ones...