T/C Encore 44 Mag Extractors are Tool Steel by EABCO   The "44 Rem Mag" extractor is used for a few different TC Encore and Pro Hunter chamberings... Fits 44 Remington Magnum, 44 Special, 357/44 Baine and Davis, etc.,... to name...

T/C Encore 30-30 Extractors are Tool Steel by EABCO   The "30-30" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits 30-30 Win, 7-30 Waters, 30 Herret, 6.5mm BRM, 30-30 Ackley Improved, 6mm BRM, 375 Win, 7mm...

T/C Encore 223 Extractors are Tool Steel by EABCO   The "223" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits .223 Rem, 5.56 Nato, 300 Blackout, 221 Fireball, .222 Rem, 17 Fireball, 17 Mach IV, 7mm TCU, 204...

AR10/308 Lower Parts Completion Kit   All the internal parts needed to complete a stripped lower AR10/308 receiver. DPMS compatible and all manufactured in the USA under strict quality control standards. Here's what's included: Front Pivot Pin ...

Bond Hooded Front Silhouette Sight by EABCO- Original Ralph Bond designed IHMSA Silhouette front sight manufactured by EABCO has a front post that's adjustable for width and height with a removable one inch tubular hood. This is the same sight that we...

T/C Encore 300 Win Mag Extractors are Tool Steel by EABCO   The 300 Win Mag extractor is used for TC Encore and Pro Hunter barrels chambered in 300 Winchester Magnum and 7mm Remington Magnum. Our extractors are precision machined...

T/C Encore 35 Whelen Extractors are Tool Steel by EABCO   The 35 Whelen extractor is used for TC Encore and Pro Hunter barrels chambered in 35 Whelen. Our extractors are precision machined from tool steel billet. We...

T/C Encore 6.5x284 Extractors are Tool Steel by EABCO   The 6.5x284 extractor is used for TC Encore and Pro Hunter barrels chambered in 6.5 x 284 Norma, .284 Winchester, and anything else based on .284 Winchester brass. Our...

T/C Encore PPC Extractors are Tool Steel by EABCO   The PPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6mm PPC and 22 PPC. Our extractors are precision machined from tool steel billet. We...

T/C Encore Hornet Extractors are Tool Steel by EABCO   The "Hornet" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 Hornet, 22 K-Hornet, 17 Hornet, 17 Ackley Hornet... Basically any cartridge that is...

Hogue Polymer AR15 Trigger Guards with Hardware  Curved trigger guard gives more finger room and is a direct replacement for the straight AR15 trigger guard. Available in Black, Flat Dark Earth, and OD Green, they add a nice custom look to your...

 Tech Sights Spanner Wrench for Model 100 & 200 Sights TS211 Sight Tool for Adjusting TS220      The TS2ll Sight Tool allows for the following adjusting on the Tech Sights: Detent tip for Ruger TSR100 & TSR200...

AR Pivot & Roll Pin Install ToolFor the AR-15 or the M-16Makes pivot spring and detent work fast and effortlessRoll Pin Punch and starter for all lower receiver roll pinsComes with handy key ring for storageBlack zinc plated steel

ScopeRib III Sight System for Handgun SilhouetteReplacement hood for your ScopeRib III Sight System, used in handgun metallic silhouette competition. This is a 2.5" long tube, the same as that which comes with the ScopeRib III Sight System.  Note:...

Choate Short Bipod Adaptor/Swivel Stud  A shorter, lower bipod adapter that fits the forend rail of our Sniper, Varmint and Tactical stocks, lets you install a Harris bipod so that it tightens against the forend so there is not side to side movement...

Adjustable Ruger 10/22 Guide Rod *Additional Spring and C-Clip Retainer Sold Separately - Select Above* Heavy Duty Spring and C-Clipped Rod Allow Custom Spring Tension  Taking the Ruger 10/22 Bolt Spring and Guide Rod up a notch in precision, the...

T/C Encore 308 Extractors are Tool Steel by EABCO   The "308" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 BR, 22-250 Rem, 6mm BR, .308 Win, 7-08 Rem, 243 Win, 260 Rem, 6.5x47 Lapua, 6.5 Creedmoor, 30-06, 25-06,...

Volquartsen 10/22 BoltIncludes Custom Rod and Spring with Buffer  Complete CNC-Machined Bolt features our hardened and tuned extractor for positive, consistent extraction. It also includes our round titanium firing pin. This round design ...

Encore Tool Steel Locking Bolts by EABCO- Precision machined tool steel barrel locking bolts for TC Encore and Pro Hunter barrels. 2014 was a worrisome time of shortages in the gun industry. We tooled up to machine these excellent locking bolts from tool...

Pro Hunter "FlexTech" Muzzle Loader Forend Screws and Washers The TC Factory Pro Hunter "FlexTech" forend for muzzle loaders has two screws of different length (2 washers also included). If you've lost one or both screws or washers, this kit supplies...