E. Arthur Brown Company

TC Encore Pro Hunter 308 Extractors - Tool Steel by EABCO

(15 reviews) Write a Review


T/C Encore 308 Extractors are Tool Steel by EABCO
  The "308" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 BR, 22-250 Rem, 6mm BR, .308 Win, 7-08 Rem, 243 Win, 260 Rem, 6.5x47 Lapua, 6.5 Creedmoor, 30-06, 25-06, 270 Win, 280 Remington,6.5x55 Swede, 257 Roberts... to name only a few. We manufacture the extractors we use in EABCO Accuracy Barrels and we feel they are better than factory extractors for the following reasons: The T/C factory extractors are machined from castings. Ours are precision machined from tool steel forgings.
  We install our Tool Steel 308 Extractors in our EABCO Accuracy Barrels and they give proper and reliable extraction. If you need to replace the extractor in your TC Encore or Pro Hunter barrel, these are excellent extractors.
View AllClose

Additional Information

Item Type:
308 Winchester
Encore Pro Hunter
Encore Pro Hunter
E. Arthur Brown Company
Ships Internationally
View AllClose

15 Reviews

  • 5
    Excellent product

    Posted by Roger Holley on Apr 21st 2023

    After 10 years I found an extractor that would make my encore functional!

  • 5
    Perfect replacement!

    Posted by Jim Schorsch on Apr 9th 2022

    The spring works perfectly! Thanks for the great replacement part.

  • 5
    Works Great!

    Posted by Larry on Mar 23rd 2022

    My 22-250 barrel wouldn't extract a case from day one. I kinda forgot about this barrel and found it in back of safe. I ordered a steel by EABCO and it works perfect! A quality product, thanks EABCO.

  • 5
    TC Extractor

    Posted by Shawn Denis on Nov 7th 2021

    What a great company, Thompson Center would not let me even talk to a gunsmith, I called this company and they put me in contact with a their Gunsmith and he knew exactly what my issue was, He recommended one of their extractors as its milled a little different then TC extractors, I installed it in my TC Prohunter and I went from a gun that would not extract a shell to one that extracted a shell in my 3006 barrel everytime. So happy as TC wouldn't even address the issue.

  • 5
    The right stuff

    Posted by Rick W on Oct 23rd 2020

    The original extractor that came with the barrel was junk. The new extractor from EABCO was the ticket. Thanks again for a quality part. Barrel shoots great pic shows a 4 shot group at 100 yards.

  • 5
    EBACO T/C extractors

    Posted by Stephen Gutowski on May 6th 2020

    These are the go-to extractors for T/C Encores (S&W mfc.) in non-rimmed calibers. They provide positive extraction.

  • 5
    TC Encore 308 Extractors

    Posted by Rick Hiland - Gunsmith on Jan 11th 2020

    I purchased this extractor made of tool steel to replace an OEM extractor (cast) which was worn badly in a customer rifle. Same price as an OEM. This EABCO extractor fit perfectly with absolutely no fitting required and solved my customer's problem. Excellent work. Thank you.

  • 5

    Posted by Ross Schemmel on Oct 28th 2019

    Factory extractor was failing to push cases out of chamber - slipping over case edge. This unit works perfectly - over 100 rounds fired without a single failure.

  • 5

    Posted by Bob Bergey on Jun 1st 2017

    Wish it came with new spring

  • 5

    Posted by Gary Willson on Apr 4th 2017

    Bought this extractor because the one in my barrel would not extract the case after firing. also would not extract an unfired case. Problem solved. Works now as it should. I am completely satisfied.

View AllClose

Recommended for You