NEW

Spear Tip Jag .45 Cal. Pro-Shot’s Benchrest Quality spear tip brass jag keeps the cleaning patch in place running through the bore. The most efficient and effective way to clean a bore is with a jag draped with a patch that completely covers the...

MDT AICS Magazine Loader The MDT Magazine Loader makes loading mags quick, easy, and painless.It works by pushing the magazine spring down leaving room for your next round to be inserted. It’s small and lightweight so it can easily fit in your...

Buffer Tube Mount for ManticoreAdapts the Manticore 10/22 to accept milspec buffer tubes so you can mount an AR style buttstock. Accepts mil-spec buffer tubes Single-screw installation Supports straight or angled configuration The Buffer Tube Mount for...

Cornerstone Safety Thumb Ledge for Ruger® Mark IV Black - 1911 Style Thumb Safety for Ruger Mark IV. Replaces factory thumb safety without modifying the internals, and improves hand placement for better grip and control. - This oversized,...

Double Kross 10/22 Magazine Two 10 round rotary 10/22 magazines attached at the middle. Shoot the top 10 rounds, flip the magazine over and shoot the bottom 10 rounds. So, you get 20 rounds with the reliability and speed of a 10 round magazine. The sides...

The Ultimate Trigger Kitfor the Ruger MKIV & MKIV 22/45 RedThis “Ultimate” Kit for Ruger® Mark IV™ & Mark IV 22/45 is a matched set of upgrade parts - DO NOT use any other brand of sear and hammer with the TANDEMKROSS...

Jam Nut for Compensators, 1/2x28, Black, .750 DiamJam nut allows locking of correct up and down index for compensators and muzzle brakes. Specifications: 1/2x28 TPI .750 OD E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

Spitfire Lightweight Barrel for Ruger® 10/22® Lightweight 16" barrel optimized for competition performance Compatible with many M-LOK® accessories 1/2"x28 muzzle threading Introducing the Spitfire Lightweight Barrel for Ruger®...

Warne HyperLite Rings Matte Black The Warne® HyperLite™ scope rings are the ultimate lightweight optic mounting solution. Crafted from Warne's exclusive MagnaFusion™ Alloy, these rings offer a staggering 35% weight reduction over...

AccuWasher Gen 2 Muzzle Device Alignment The AccuWasher® Gen 2 Muzzle Device Alignment System is the ultimate solution for precise and repeatable muzzle device alignment. Unlike traditional crush washers, this mono-shim system is precision...

Colt SA Revolver RP Shooters Pak This Shooter's Pak includes a Wolff reduced power mainspring, a reduced power sear/bolt spring (flat-type), extra power base pin spiring and stainless steel hand ejector spring. These kits offer great improvement in the...

Colt SAA Revolver RP Shooters Pak This Shooter's Pak includes a Wolff reduced power mainspring, a reduced power sear/bolt spring (wire-type), extra power base pin spiring and stainless steel hand ejector spring. These kits offer great improvement in the...

Picatinny Folding Buffer Tube Converts Picatinny receiver to accept a buffer tube style buttstock. Works with Sharps Bros TC stocks, Tandem Kross Manticore, and any other guns where a Picatinny attachment is featured at the rear of the receiver. Folds...

Picatinny Buffer Tube Adapter Converts Picatinny receiver to accept buffer tube and buttstock. Works with Sharps Bros TC stocks, Tandem Kross Manticore, and any other guns where a Picatinny attachment is featured at the rear of the receiver. This is a...

Picatinny Folding Buffer Tube Adapter Converts Picatinny receiver to accept buffer tube and buttstock. Works with Sharps Bros TC stocks, Tandem Kross Manticore, and any other guns where a Picatinny attachment is featured at the rear of the receiver...

CZ 457/455 Magazine - 17 HMR, 22 WMR 10 Rd Polymer replacement magazine for CZ 455, CZ 457, and CZ 512 rifles holds 10 rounds. E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

ELG M-LOK® Hand Guard – 1895 The Enhanced Lever Gun (ELG) M-LOK Hand Guard is a lever-action hand guard designed to optimize the functionality of the Marlin 1895-pattern series of lever-action rifles. The hand guard is 12” long and...

ELG™ M-LOK® Stock – Marlin® 1895/1894/336 The ELG M-LOK Stock is designed to provide Marlin lever-action rifle shooters a stock with maximum adaptability that optimizes their iconic firearm. With adjustable length-of-pull (LOP) and...

Encore Pro Hunter Forend 8 Inch with Picatinny Rail A short forend for TC Encore Pro Hunter Barrels and Frames. Includes two 8-40 x 7/16" screws and will attach to pistol spaced forend holes. The barrel channel will accomodate barrels up to .824" in...

Encore Pro Hunter Forend 11 Inch with Picatinny Rail A long forend for TC Encore Pro Hunter Barrels and Frames. Includes two 8-40 x 7/16" screws and will attach to either pistol or rifle spaced forend holes. The barrel channel will accomodate barrels up...