Forster Cross Bolt Die Lock Rings...Replace All of Your Die Lock Rings with THESE!Clamps around the entire die, resulting in a more precise mating of the lock ring threads to the die threads. They are supplied with all Forster’s high quality Bench...

Forster Accu-Ring Die Lock RingInstalls a Micrometer Adjustment Dial on Your Reloading Dies!The Accu-Ring is a sizing/seater die lock-ring which provides reference marks in increments of thousandths of an inch (0.001”). Sizing die (primary use) –...

Forster 3-in-1 Cutter Trims and Deburrs in One Step... Specially ground carbide blades trim your cases to length and chamfer the inside and outside of the case mouths. Precise chamfered edges have a 14° angle on the inside and 30° angle on the...

Forster Original Case Trimmer Collets #1, #2, #3, and #4Collet and Pilot Fitting Chart The collet grips the rim of cartridge brass on center in the Forster Case Trimmer. Each collet fits 2-3 different rim diameters and many cartridges have the same rim...

Pilots for Original, Classic and Power Forster Case Trimmers Please see our Collets and Pilots Chart to determine the right pilot for your caliber and Case Trimmer. Or, choose your pilot diameter above. Pilot Diameter is the inside neck diameter AFTER...

Forster's Original Case Trimmer and Trimmer Kit  The Original, Forster Case Trimmer is the right choice for most calibers with bullet diameters from .171" to .459". It is actually a fine miniature lathe with a superior shell holder design based on a...

Forster Case Mouth Deburring Tool... Chamfers the Inside and Outside Edges After Trimming  Finish your case trimming job with a chamfered or beveled edge with this tool. Deburred case mouths seat bullets smoothly with minimal scratching.   See...

Forster Case Neck Reamer Tools   Forster neck reamers replace the pilot in the Forster case trimmer and allow inside neck reaming of the case mouths to relieve pressure. Select the reamer that matches your bullet diameter from the drop menu above...