Shop by Model

Rifle Basix Trigger for CZ Model 455Adjustable from 10 oz. to 2.5 lbs. Fits CZ Rimfire Bolt Action Model 455 Rifles This unit replaces the factory trigger on the bolt action rimfire Ceska zbrojovka CZ-455 rifle. This trigger is adjustable for sear...

EABCO Forend Washers fit T/C Encore Pro Hunter- These are replacements for the tiny little Washer/Spacers under the screws on TC Encore and Pro Hunter forends. We had a devil of a time finding a source for them and they are expensive. Forend washers are...

Legacy Magazine fits Remington 700 SA Detachable Mag Kit 10 Rounds - These magazines fit Remington 700 rifles that are converted to detachable magazine with the Legacy Sports Detachable Mag Kit. Sometimes referred to as "ammoboost" mags. These magazines...

TC Encore Muzzleloader Walnut Stock & Forend SetStandard buttstock and forend for the TC Encore & ProHunter rifles.  Drop-In Fit: These buttstocks are completely inletted for the Encore frame. Remove your original stock, slip this one...

KAK Compensator Kit9/16x24 fits 40 Cal- Includes Crush Washer- Often, 350 Legend Barrels are threaded 9/16x24 to avoid mounting a 22 or 30 caliber brake. The exit hole has to allow clearance for the .357 caliber 350 Legend bullet. The easy answer for...

Original Bob Sled CMMG .22 Service Rifle Single Shot Mag - The CMMG-SVC Bob Sled provides a single shot loading bed or follower to AR-15 rifles with the CMMG .22 LR conversion. This service length magazine allows the easy loading and firing of single .22...

Original Bob Sled CMMG .22 Match Rifle Single Shot Mag - The CMMG-M Bob Sled provides a single shot loading bed or follower to AR-15 rifles with the CMMG .22 LR conversion. This allows the easy loading and firing of single rounds during competition,...

CMMG 6.5 Grendel Barrel...Medium Taper 16 inch 6.5 Grendel barrel fits AR-15 platform. Upgrade your AR-15 ballistics by utilizing CMMG’s dedicated 6.5 Grendel barrel sub-assembly on your next build. 416 Stainless with SBN (Salt Bath Nitride) finish...

CMMG 350 Legend Barrel...Medium Taper 16 inch 350 Legend barrel fits AR-15 platform. Perfect for building your custom AR-15 upper group. Comes with properly installed M4 barrel extension. All CMMG barrel sub-assemblies are properly headspaced.350 Legend...

Bullet-Button® AR-15 Patriot Mag Release- Based off the original Bullet Button magazine lock concept, this new Patriot Mag Release makes the operation more convenient. It's the Bullet Button RELOADED! This new kit is California 2020 compliant and...

AR-15 / AR-10 Bullet-Button®- This is the original magazine release lock for AR15/AR10 rifles to make them compliant with California's high capacity magazine laws. The law says the magazine must not be detachable conveniently. It must require "tools"...

ORYX Chassis Stock fits Remington 700 LA/RH - OD Green Mag Compatibility: 3.715" AICS magazines   aPlease check the size of your Long Action AICS Magazine...       (It's stamped right on it. Make sure it will...

ORYX Chassis Stock fits Savage Axis Long Action /RH - OD Green Mag Compatibility - Long Action AICS 3.560"  Please check the size of your Long Action AICS Magazine...    (It's stamped right on it. Make sure it will fit!) Chassis...

EABCO Firing Pin SPRING fits TC Encore Pro Hunter- Replacement for the Thompson Center factory firing pin spring (that sometimes breaks). Our EABCO brand spring is made from a little thicker spring stock to give better durability. Expansion power and...

McFadden Colt M4 .22 LR Lightnin Grip Adaptor- Adapts the Lighnin Grip mag loader to reload Colt M4 .22 LR AR-15 Magazines. This is the adaptor only. The Lightnin Grip mag loader is sold separately. This adaptor also works on .22 LR AR-15 magazines for...

Pistol Competition Kit for MK IV, Gold Trigger Trying to figure out which parts are needed to take the Ruger MK IV or MK IV 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes our MK IV Accurizing Kit and Bolt...

T/C Contender and G2 Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Contender and G2 Contender hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

EABCO Picatinny Scope Mount fits Ruger 10/22- This Precision Machined 10/22 Picatinny Rail mounts to your existing 10/22 scope mounting holes and gives superior alignment and rigidity for the best accuracy potential. It's totally machined from aircraft...

CMMG AR15 Barrel Dedicated 22LR | Dedicated Bolt Sold SeparatelyBuild a TRUE .22 LR AR-15! This barrel is a true 1:16 twist rimfire barrel with an integral .22 LR chamber. It requires a dedicated .22 LR bolt assembly (sold separately) and .22 LR AR-15...

CMMG Dedicated .22 LR Bolt Group Fits CMMG Dedicated .22 LR Barrel Build a True .22 LR AR-15 Rifle. This dedicated .22 LR bolt group fits the CMMG dedicated .22LR barrels as well as our EABCO 22 LR Accuracy Barrel(R). These barrels have a true rimfire...