Shop by Model

Jard 3-Position Safety for Savage 10/110 RiflesThe JARD 3-Lever Triggers for Savage 10/110 require a 3 position safety. Check your rifle. If your Savage 10/110 series rifle has a 2-position safety, you will need to install one of these 3-position...

Jard 3593 Set Trigger fits Remington 700 2 lb. - A true SET trigger just like the old Sharps rifles. It comes pre-set for a standard 2 lb. trigger pull... But when you want a super light pull, you just push the trigger forward until it clicks... This...

Jard 4147 Trigger fits Savage 10/110 Series Rifles w/Bottom Bolt Release, 7-12 oz - JARD's remarkable 3-Lever System brings exceptional trigger performance to Savage centerfire rifles (see the list of compatible models below). Designed to replace the...

Jard 4626 Trigger fits Savage 10/110 Series Rifles 13-18 oz. Top Bolt Release- JARD's remarkable 3-Lever System brings exceptional trigger performance to Savage centerfire rifles (see the list of compatible models below). Designed to replace the factory...

HIVIZ® LiteWave® Front and Rear Sight Combo for Ruger 10/22 rifles. - Fast sight acquisition is what these HiViz sights are all about. The fiber optic LiteWave Lite Pipes gather and concentrate ambient light so that it shines bright out the end.....

EABCO Picatinny Scope Mount fits TC Encore Pro Hunter 12 Ga. BarrelsPrecision Machined from Aircraft Grade Aluminum BilletRigid and Straight to Enhance Accuracy PotentialMilspec Picatinny fits Weaver and Picatinny Rings and AccessoriesSuper Strong...

Thread Protector fits AR15 HBAR Contour 1/2 x 28 Stainless- Protect and beautify your HBAR muzzle threads with this beautiful knurled stainless thread protector. Standard 1/2 x 28 thread with a length of 5/8th inch and .740" diameter, it fits all EABCO...

Tactical Solutions 10/22® Extended Magazine Release- This sleek looking lever action magazine release for the Ruger 10/22 replaces the factory magazine release and gives super leverage for easy magazine drop and re-insertion. An easy swap-in...

Tactical Solutions 1022EMR-SIL Extended Magazine Release fits Ruger 10/22 SilverThis sleek looking lever action magazine release for the Ruger 10/22 replaces the factory magazine release and gives super leverage for easy magazine drop and re-insertion...

Remington 700 Accuracy Recoil Lug - Bright Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN...

Remington 700 Accuracy Recoil Lug - Matte Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN be...

Remington 700 Accuracy Recoil Lug - Matte Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

Remington 700 Accuracy Recoil Lug - Bright Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

Ruger MK I, II, III & IV Fiber Optic Adjustable Rear Sight Improve the performance of your Ruger MK I, II, III and IV with the new adjustable rear sight. Our bright and fully adjustable rear sight will enhance your confidence and shooting experience...

Remington 870 Buttstock and Forend Black 12 Ga. - Transform your Remington 870 Shotgun from Plain Jane to Custom with this Hogue Buttstock and forend. Constructed by Hogue "OverMolded" rubber process, this stock absorbs recoil better than hardwood or...

Remington 870 Tamer® Shotgun Pistol Grip and Forend (12 ga.)- Transform your Remington 870 Shotgun from buttstock to pistol grip with the Hogue "Tamer" pistol grip and forend. Constructed by Hogue "OverMolded" rubber process, the Tamer absorbs...

Magazine Release for Ruger MK IV (not 22/45)Standard size replacement for the extended magazine release that comes on factory Ruger MK IV Hunter and Competition models. This part replaces the extended factory part for users of our Volthane and Laminated...

Volthane Target Grips for Ruger MK IV- Featuring an aggressive no-slip diamond checkering, our new Volthane Grips for the Ruger MK IV are made from a proprietary material designed to withstand the elements as well as hold up to moisture, gun oils, and...

"Green Springs" Magazine Springs for Ruger® MK Series (3-PACK)Shot-peened spring offers longer life than factory springReduces failure-to-feed issuesReplaces old, broken mag springsUpgrade your Ruger® MK series magazines with aftermarket...

"Red" Recoil BufferEasy Installation No Modifications  The best way to protect your Ruger 10/22 receiver from damage caused by the metal bolt impacting the aluminum receiver each time you fire the rifle is to install one of these custom bolt buffers...