YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

T/C Contender G2 Locking Bolt Set (2 Pieces)  Spring loaded barrel locking bolt set for Original Contender/SSK-50 and G2 Contender. Installs under spring tension into the barrel underlug and locks the barrel into battery when the action is closed...

Krossfire Bolt for Ruger® Mark IV™ & 22/45™ A TandemKross Bolt with Black DLC Finish w/ Gold Halo Assembled with TandemKross Firing Pin, Extractor, and Guide Rod Includes Integral Halo Charging Ring for Improved Clearing and...

TC Encore Accuracy Barrel® 22-250 Remington, 26" Blue, 1:12 Twist For shooters chasing maximum precision, this 22-250 Remington barrel from E. Arthur Brown Co. is built to deliver. At 26" in a heavy contour profile, it’s tailored to...

TC Encore Accuracy Barrel – 22 ARC, 26" Blue, 1:7 Twist Designed for precision shooters who demand consistency, this 22 ARC barrel from E. Arthur Brown Co. is built to exceed expectations. At 26" with a heavy contour profile, it’s tailored...

Henry Lever Supreme Handguard by RPA tactical styled M-LOK handguard that fits the Henry Lever Action Supreme Rifles... Fits All Henry Lever Supreme Rifles with Fast Install. All parts type 3 hard anodized 6061 aluminum for lifetime durability. A...

TC Encore Accuracy Barrel 20 ga. Rifled Shotgun 26" StainlessMatch Grade Rifle Bore, 2¾" Chamber, and 11 Degree Target Crown 1:24 Twist Our 20 ga. Rifled Slug barrel for the Encore Pro Hunter is optimized for accuracy. We use the same barrel...

TC Encore Accuracy Barrel 20 ga. Rifled Shotgun 26" BlueMatch Grade Rifle Bore, 2¾" Chamber, and 11 Degree Target Crown 1:24 Twist   Our 20 ga. Rifled Slug barrel for the Encore Pro Hunter is optimized for accuracy. We use the same barrel...

Blue TC Encore Accuracy Barrels® by EABCO22 Creedmoor 1:7, Standard Model, Match Grade BarrelsTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

Hogue 10/22 Stock .920 OverMolded Black  - OverMolded Stocks start with a super strong, rigid, fiberglass reinforced bedding block that precisely fits the guns' action. This bedding block is then OverMolded with a durable but soft synthetic...

Cornerstone Safety Thumb Ledge for Ruger® Mark IV Black - 1911 Style Thumb Safety for Ruger Mark IV. Replaces factory thumb safety without modifying the internals, and improves hand placement for better grip and control. - This oversized,...

Blue TC Contender/SSK-50/G2 Accuracy Barrels® by EABCO7-30 Waters 1:9, Standard Model, Match Grade BarrelsTC Contender G2 Accuracy Barrels® fit the TC Contender and G2 Contender frames. Manufactured by E. Arthur Brown Company with...

Blue TC Contender/SSK-50/G2 Accuracy Barrels® by EABCO22 Long Rifle 1:16, Standard Model, Match Grade BarrelsTC Contender G2 Accuracy Barrels® fit the TC Contender and G2 Contender frames. Manufactured by E. Arthur Brown Company with...

Blue TC Contender/SSK-50/G2 Accuracy Barrels® by EABCO223 Remington 1:12, Standard Model, Match Grade BarrelsTC Contender G2 Accuracy Barrels® fit the TC Contender and G2 Contender frames. Manufactured by E. Arthur Brown Company with...

TC Encore 12 Ga Shotgun Cross-Slot Aluminum Base - Matte The TC Encore 12 Ga shotgun cross-slot base is strong and durable, yet lightweight and versitile.  Easily mounts to your 12 Ga Encore shotgun.     New Pictures will be added as they...

TC Contender Cross-Slot Aluminum Base - Matte The TC Contender cross-slot base is strong and durable, yet lightweight and versitile.  Ideally set in a matte blue finish to detract any glair or shine.  Easily mounts to your Contender barrel with...

TC Encore ProHunter Barrel 26" Stnls Fluted 400 Legend Threaded TC Encore ProHunter barrels feature:  Finish Stainless Steel Length 26" Contour Heavy .810" at Muzzle Threaded with 11/16x24 thread, includes thread protector No Sights, Drilled &...

TC Encore ProHunter Barrel 26" Stnls Fluted 308 Winchester Threaded TC Encore ProHunter barrels feature:  Finish Stainless Steel Length 26" Contour Heavy .810" at Muzzle 1:10 Twist Rate Threaded with 5/8-24 thread, includes black thread...