Mark IV Pistol Competition Kits with 19.22 Flat Trigger This kit includes our Accurizing Kit for the Ruger MK IV Pistol and Bolt Tune-Up Kit for MKII, MKIII, MK IV, and 22/45. The Pistol Competition Kit is designed to produce a crisp, clean 2.25 trigger...

Volquartsen Ruger Mark IV Accurizing Kits with 19.22 Flat Trigger The complete drop-in kit comes complete with our CNC Machined Disconnector, Target Hammer, Hammer Bushing, Target Sear, Target Trigger with plunger and spring. It also comes with pretravel...

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* SPEEDLOCK Hammer Spring - Gives More Reliable Primer...

Ruger 77/22 Rifle Performance Pak - Springs Extra Power, 23 lb. Striker Spring (Factory is 19 lb.) Reduced Power Trigger/Sear Spring Installing these springs in your Ruger 77/22 will improve the trigger and overall performance. Ruger 77/22 is a...

Ruger MK I, II, III, and 22/45 Performance Pak - Springs Extra Power Recoil Spring Extra Power Firing Pin Spring Reduced Power Hammer Spring Reduced Power Trigger Spring Fit: Ruger Mark I, II, III, and 22/45 Upgrading your Ruger pistol with these...

 YoDave CZ-452 Plus 10 Striker Spring Upgrade your worn or weak CZ-452 striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. Also fits 453, 455, and 513 models. All benchrest...

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

Ruger 10/22® Competition Trigger Kit by Power Custom - A professional action tune-up for your Ruger 10/22 that you can afford... and you can  "do-it-yourself". - Includes every important part from the insides of an expensive modular trigger...

M-LOK and Flush Cups Accessory Panel  This accessory panel works with our Marlin and Henry Modular and Adjustable aluminum butt stocks.  Ambidextrous attachment on either side of the stock Hard anodized aluminum Lightweight at only 2 oz...

Savage AXIS Pro Trigger Kit An Economical and Effective Tune Up for Original Savage Axis Triggers.   Reduce Factory 6 lb Trigger Pull Up To 40%Includes Spring for 1.5 lbs Trigger Return Includes Spring for 2.5 lbs Trigger Return Includes Spring for...

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* Heavy Duty Hammer Spring - Gives More Reliable Primer...

Pistol Competition Kit for MK IV, Gold Trigger Trying to figure out which parts are needed to take the Ruger MK IV or MK IV 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes our MK IV Accurizing Kit and Bolt...

The Ultimate Trigger Kit for the Ruger MKIV & MKIV 22/45 BlackThis “Ultimate” Kit for Ruger® Mark IV™ & Mark IV 22/45 is a matched set of upgrade parts - DO NOT use any other brand of sear and hammer with the TANDEMKROSS...

Volquartsen Ruger MK IV® Accurizing Kit This complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Target Trigger with plunger and spring. It also comes with pretravel and overtravel...

Volquartsen Triggerless Accurizing Kit fits Ruger MKIV (No Trigger Included)- For those who have a different preference for the trigger they choose, this triggerless kit has everything you need... Except the Trigger. The kit comes complete with our CNC...

Volquartsen Gold* Trigger fits Ruger MKII, MKIII, and MKIV Pistols and 22/45CNC-Machined Target Trigger in *Gold Colored TiN Adjusts for Pre-Travel and Post-Travel - The Volquartsen Target Trigger is now available in TiN finish, giving it a distinctive...

Volquartsen Target Hammer Kit for the Ruger 10/22- The target hammer kit was designed to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory hammer (Not for BX-Trigger). No stoning or fitting is required. Reduces trigger...

Timney 49ER Ambidextrous Safety fits AR15- The Timney 49er is a 49 or 90 degree AR15 safety (Ambidextrous). It can be used in either the normal 90 degree or for ultra quick changes a 49 degree short throw for quick and easy manipulation. In addition,...

 The TANDEMKROSS “Thunder” Hammer for SW22® Victory™ is a drop-in replacement hammer that significantly reduces SW22® trigger pull weight. The “Thunder” SW22® Victory™ hammer is precision-machined from hardened S7 tool steel for improved...

Volquartsen Target Sear for Ruger® MK II™ and Mk III™- This specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from hardened A2 tool steel.Does NOT Fit: Ruger MKIV Pistols