TC Encore Accuracy Barrel 20 ga. Rifled Shotgun 26" BlueMatch Grade Rifle Bore, 2¾" Chamber, and 11 Degree Target Crown 1:24 Twist   Our 20 ga. Rifled Slug barrel for the Encore Pro Hunter is optimized for accuracy. We use the same barrel...

Blue TC Encore Accuracy Barrels® by EABCO22 Creedmoor 1:7, Standard Model, Match Grade BarrelsTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

Thread Protector fits Large Caliber 11/16 x 24 Blued (Black) Beautiful knurled blued thread protector in 11/16x24 thread with length of .625" and outside diameter of .820" Compatible with new TC ProHunter large caliber barrels (over 30 cal) like the 360...

Thread Protector fits Large Caliber 11/16 x 24 Stainless  Beautiful knurled stainless thread protector in 11/16x24 thread with length of .625" and outside diameter of .820" Compatible with new TC ProHunter large caliber barrels (over 30 cal)  

Remington 700 Accuracy Barrel® 300 Win Mag, 1:10, Blue Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI (Standard Remington) Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length,...

Stainless AR-15 Fluted HBAR Barrel - National Match Grade Upgrade your AR-15 with our 24" Stainless Steel Fluted HBAR Barrel, designed for precision shooting with 5.56 NATO and .223 Rem (Wylde) compatibility. Featuring an 11° target crown and a 1:9...

EABCO Ruger 10/22 Scope MountPrecision Machined Weaver Style Scope Mounting Base Silver  Our EABCO Ruger 10/22 Scope Mounting Base is precision machined to optimize the base for the very best ring engagement, alignment, and rigidity. No molding or...

Fits 20 Ga. Remington 870 shotguns, Remington pump action rifles and semi auto rifles. The Mark 5 buttstock reduces felt recoil and muzzle climb to make follow-up shots faster and more accurate. Single-handed firing is also much easier. The stock is made...

EABCO 22 ARC Barrel for AR15 Rifles This EABCO 24" 22 ARC HBAR Accuracy Barrel® is crafted for AR-15 rifles, maximizing velocity and precision. Perfect for long-range shooting, this barrel is built to meet and exceed SAAMI specs, providing remarkable...

AR-15 A2 Buttstock Screw A2 buttstock screw with the vent hole down the middle. E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

Remington 700 Accuracy Barrel® 22-250 Rem, 1:12, Blue Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI (Standard Remington) Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length,...

T/C Contender/SSK-50 Barrel Hinge PinThis stainless steel barrel hinge pin is a direct replacement for the Thompson Center Contender and SSK-50 hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to swap...

T/C Encore and Pro Hunter Barrel Hinge Pin, StnlsThis stainless steel barrel hinge pin is a direct replacement the Thompson Center Encore and Pro Hunter hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

Our Mil-Spec Rifle Length Buffer Tube Kit consists of a 10" fixed position buffer tube, heavy 5.6 oz buffer assembly and an 11.5" pre-loaded steel spring. The buffer tube is made of T6-6061 aluminum and is designed to fit any A1/A2 fixed position...

AR-15 Gas Block – Low Profile .936" Steel Designed for larger-diameter barrels and compact builds, this .936" Low Profile Gas Block delivers strength and simplicity. Crafted from rugged 4150 steel with mil-spec specs and a non-reflective matte...

.750 Low Profile Steel Gas Block – Includes Roll Pins & Wrench Engineered to keep your AR-15 build sleek and field-ready, this low profile steel gas block is a staple upgrade for anyone running .750” diameter barrels. Made from hardened...

This is a standard AR-15 Micro Sized Gas Block. Designed with the minimum profile to fit under nearly any handguard system, it snugly fits standard .750 diameter barrels. Has a shallow "cut" mark in the front face for those who want to do witness marking...

A Standard AR-15 Charging Handle. Mil-Spec 6061-T6 Aircraft Aluminum Smooth Operation under Extreme Conditions Black Finish Fits: AR-15 E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332