TriggerTech Adaptable fits AR-15, Curved Black Trigger   Adjustable from 2.5 to 5 lbs. the TriggerTech "Adaptable" AR-15 Trigger is a general use trigger replacement for the milspec AR-15 trigger. It gives you all of the advantages of FRT Friction...

TriggerTech Adaptable fits AR-15, Straight Flat Stnls Trigger   Adjustable from 2.5 to 5 lbs. the TriggerTech "Adaptable" AR-15 Trigger is a general use trigger replacement for the milspec AR-15 trigger. It gives you all of the advantages of FRT...

MDT M-LOK ARCA Rail 3.3 Inch Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail. This handy 3.3 inch ARCA rail attaches to any rifle, handguard, or chassis with M-LOK slots. ARCA Swiss adapters have become the standard for...

MDT GRND-POD PRS Bipod The MDT GRND-POD was designed to maximize versatility, as well as cost savings, while retaining features that are most important in a precision rifle bipod. The GRND-POD goes far beyond the typical Harris Bipods in features, like...

Rifle Basix Trigger for CZ Model 455Adjustable from 10 oz. to 2.5 lbs. Fits CZ Rimfire Bolt Action Model 455 Rifles This unit replaces the factory trigger on the bolt action rimfire Ceska zbrojovka CZ-455 rifle. This trigger is adjustable for sear...

KAK Compensator Kit9/16x24 fits 40 Cal- Includes Crush Washer- Often, 350 Legend Barrels are threaded 9/16x24 to avoid mounting a 22 or 30 caliber brake. The exit hole has to allow clearance for the .357 caliber 350 Legend bullet. The easy answer for...

Pistol Competition Kit for MK IV, Gold Trigger Trying to figure out which parts are needed to take the Ruger MK IV or MK IV 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes our MK IV Accurizing Kit and Bolt...

EABCO Picatinny Scope Mount fits Ruger 10/22- This Precision Machined 10/22 Picatinny Rail mounts to your existing 10/22 scope mounting holes and gives superior alignment and rigidity for the best accuracy potential. It's totally machined from aircraft...

CMMG Mil-Spec Trigger Kit, AR15 - 55AFF97The perfect trigger for your next build.  Reliable single stage design based on the original M16 trigger, modified for semi auto use.Mil-Spec Trigger Kit includes:Hammer AssemblyHammer SpringTriggerTrigger...

CMMG 350 Legend Magazine fits AR15, 10 Rounds - This 350 Legend Magazine and our 350 Legend Barrel are just about all you need to convert your 223/5.56 AR15 rifle to shoot 350 Legend ammunition for Deer Hunting (or other big game). The 10-Round magazine...

CMMG Gas Tube Kit, Rifle Length Length - 55DA196Fits AR-15Rifle LengthStainless SteelIncludes Roll Pin

CMMG Gas Tube Kit, Mid Length - 55DA1EEFits AR-15Mid LengthStainless SteelIncludes Roll Pin

.22 LR Conversion Kit for Your .223/5.56 AR15- Simply replace your .223/5.56 bolt carrier group with this .22 LR Bolt Group and turn your AR15 into a .22LR. Now you can practice, plink, or hunt with inexpensive .22LR ammo. Works with all milspec AR15...

.22 LR Conversion Kit for Your .223/5.56 AR15- Simply replace your .223/5.56 bolt carrier group with this .22 LR Bolt Group and turn your AR15 into a .22LR. Now you can practice, plink, or hunt with inexpensive .22LR ammo. Works with all milspec AR15...

Extended Bolt Release for Ruger MK IV (Not 22/45)This part gives a larger, grippier surface for your thumb to engage the Ruger Mark IV bolt release. Releasing the bolt after a magazine change takes less effort and becomes more natural. It's especially...

T/C Extractor Leaf Spring by EABCOThis is the little leaf spring that fits against the bottom of rimless extractors on Thompson Center accessory barrels. Rimless cartridges such as 223 Remington or 308 Winchester have a special extractor that flexes...

T/C Contender 45-70 Extractors are Tool Steel by EABCOThese 45-70 extractors are used for TC Contender and G2 Contender barrels that are chambered for the 45-70 Government cartridge. Our extractors are precision machined from tool steel forging. We...

T/C Contender 44 Magnum Extractors are Tool Steel by EABCOThese 44 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 44 Remington Magnum (44 Mag) cartridge. Our extractors are precision machined from tool...

T/C Contender 30-30 Winchester Extractors are Tool Steel by EABCOThese 30-30 Winchester extractors are used for TC Contender and G2 Contender barrels that are chambered for the 30-30 Winchester cartridge. Our extractors are precision machined from tool...

T/C Contender 22 Magnum Extractors are Tool Steel by EABCOThese 22 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Winchester Magnum Rimfire (22 WMR) cartridge. Our extractors are precision machined from...