Shop by Model

JARD Gen III Trigger for the CZ 457 This new Generation III trigger takes the CZ 457 Trigger up into a new level of refinement. Three models come Drop-In Ready for match grade trigger pulls of 3-6 oz, 7-10 oz, and 11-12 oz. Each model is screw adjustable...

EABCO CZ-457 Accuracy Barrel® 22 LR - 24" Stainless Steel Upgrade your CZ 457 with our precision-engineered 24" stainless steel barrel, featuring our EABCO Match 22 LR chamber, 1:16 twist rate, and a heavy contour that tapers from .860" to .820"...

ORYX Chassis Stock for CZ-457 Upgrade your CZ 457 with the ORYX Chassis Stock, designed by MDT for precision and performance. This aluminum chassis features changeable colored panels, M-LOK slots, and a free-floating barrel design that accommodates up...

MDT Oryx Bipod Designed to pair with your MDT Oryx Chassis stock, the ORYX bipod offers rigidity, strength and stability.  Crafted from a high-quality polymer blend, the legs deploy effortlessly and adjustment with ease.  Its ergonomic form...

 YoDave CZ-452 Plus 10 Striker Spring Upgrade your worn or weak CZ-452 striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. Also fits 453, 455, and 513 models. All benchrest...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

MDT CZ-457 Picatinny Scope Bases - Multi MOA Precision machined Picatinny scope mounts in your choice of MOA. MDT's Scope Base Picatinny Rails are a precise and reliable solution when it comes to mounting a scope on your bolt action rifle...

Lothar Walther 16.5" Stainless Steel Barrel for CZ-457 / CZ-455 - Threaded .22 LR Enhance the accuracy and performance of your CZ-457 or CZ-455 rifle with this premium Lothar Walther 16.5" Stainless Steel Barrel. Designed for precision shooters, this...

Lothar Walther 20.5" Stainless Steel Barrel for CZ-457 / CZ-455 - Threaded .22 LR Enhance the accuracy and performance of your CZ-457 or CZ-455 rifle with this premium Lothar Walther 20.5" Stainless Steel Barrel. Designed for precision shooters, this...

MDT GRND-POD PRS Bipod The MDT GRND-POD was designed to maximize versatility, as well as cost savings, while retaining features that are most important in a precision rifle bipod. The GRND-POD goes far beyond the typical Harris Bipods in features, like...

CZ-457 XRS CHASSIS SYSTEMThe XRS Chassis is designed for shooters that want the fit and feel of a traditional shaped rifle stock with the benefits of a modern precision rifle chassis system. Each XRS Chassis is constructed from a full-length CNC machined...

Rifle Basix Trigger for CZ Model 455Adjustable from 10 oz. to 2.5 lbs. Fits CZ Rimfire Bolt Action Model 455 Rifles This unit replaces the factory trigger on the bolt action rimfire Ceska zbrojovka CZ-455 rifle. This trigger is adjustable for sear...

KAK Compensator Kit9/16x24 fits 40 Cal- Includes Crush Washer- Often, 350 Legend Barrels are threaded 9/16x24 to avoid mounting a 22 or 30 caliber brake. The exit hole has to allow clearance for the .357 caliber 350 Legend bullet. The easy answer for...

MDT ORYX Chassis Stock Panels - ODG- Chassis stock "panels" are both functional and fashionable. It's easy to screw them on and off... Even mix and match the colors.Functional - Chassis Stock panels are made of composite material that insulates your...

MDT ORYX Chassis Stock Panels - GRY- Chassis stock "panels" are both functional and fashionable. It's easy to screw them on and off... Even mix and match the colors.Functional - Chassis Stock panels are made of composite material that insulates your...

Lothar Walther CZ-457/455 Barrel 17 HMR | 20" Threaded, Stnls Enhance the accuracy and performance of your CZ-457 or CZ-455 rifle with this premium Lothar Walther 20.5" Stainless Steel Barrel. Designed for precision shooters, this match-grade barrel is...

CZ 457 American Barrel Set, 17HMR 24 Inch Nitride - Brand New In-The-Box 17 HMR CZ-457 barrel with magazine and installation tools. Contour is the factory "American" profile. They will fit the barrel channel of CZ-457 American factory stocks and will...