Tandemkross "Victory" Trigger Replacement for Ruger Mk IV Silver Features:

Volquartsen Ruger MK IV® Accurizing Kit This complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Black Target Trigger with plunger and spring. It also comes with pretravel and...

Halo Charging Ring for Ruger® Mk III/Mk IV® & 22/45   The Halo is an easy to grip "pull ring" that attaches to your Ruger Mk III/Mk IV bolt. It makes it easy to pull the bolt back for anyone... Big or small, strong or weak...

Volquartsen Accessory Rail for LLV Barrels  Under barrel Picatinny accessory rail fits both Picatinny and Weaver style accessories. Mounts with two 8-32 screws under LLV barrels. Newer Volquartsen LLVs are pre-drilled and tapped. We can...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Black Mamba Uppers. Includes Patridge Front Sight and Target Adjustable Rear Sight. Fits Volquartsen 4.5 inch LLV...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel extractor for better function and reliability. The Exact...

Tandemkross "Victory" Trigger, BlackReplacement for Ruger Mk III and Mk IV 22/45Features at a Glance:Flat faced for better control and feel100% Adjustable for pretravel and overtravelLightweight skeletonized designFits MKIII or MKIV, Original or...

Tandemkross Mark III (22/45) Hammer Bushing for Magazine Disconnect-Stainless SteelCompatibility: MKIII -ALL MODELS MKIII 22-45 MKIII 22-45 Competition MKIII 22-45 Government Target MKIII 22-45 Target MKIII Competition MKIII Government Target MKIII...

Game Changer Rimfire Compensator  The Game Changer has gas ports on the top and sides so it stabilizes the muzzle and virtually eliminates muzzle rise. With no ports on the bottom, it's important to mount the game changer with the ports...

Hogue MKII/MKIII & 22/45 OverMolded Rubber Grip Finger Grooves Durable synthetic rubber, perfect for recoil absorbing without affecting accuracy.  Modern molding process and flexibility of materials results in superior grips that out perform...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIII and 22/45 to the next level? Look no...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger. Complete drop-in kit for the Ruger MKII and MKII 22/45 to...

Volthane Grips for Ruger the Ruger Mk III PistolFamous "Volthane" grips by Volquartsen fit the Ruger Mk III (will not fit the 22/45 models). Designed to position your hand exactly the same every time you grip the pistol, these grips are an aid to...

Ruger Mk II/III 22/45 Magazine Bumper Pads...Dump Your Empty Mag, Then "BUMP" One of These for Fast, Secure Reloads!   Made by economical molded plastic construction, the 22/45 magazine base bumper pad looks and functions just like the ones...

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory dovetail, locks in place with two set screws. Made of...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

Volquartsen SureStrike Firing Pin for Ruger MK I, II, III and IV (Including 22/45)   This SureStrike firing pin is designed to eliminate light strikes on the Ruger MK I, II, III and IV pistols (including 22/45). Machined .004" wider than...

CNC-Machined Disconnector for MK IV This MKIV Disconnector is CNC-Machined from 416 stainless steel (the factory disconnector is a sheet metal stamping). The machining process allows several design changes to the the way the disconnector functions. We...

Ruger MKII/MKIII 22/45 Magazine Base Pad- Add some extra seating power to your Ruger Mark II & Mark III 22/45 magazines and customize the looks and handling of your gun at the same time! These 22/45 Magazine Bumpers add some length to your magazines...

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...