Shop by Model

  Composite buttstock fits Original Contender/SSK-50 frames (Does NOT fit the G2).LOP 13 1/2"Hardware included.

TC Contender Forend 9.5 Inch with Picatinny Rail A full featured forend for G1 and G2 Contender and well as SSK-50 Barrels and Frames. This forend uses a unique "hanger bar" attachment system. The hanger bar attaches to the barrel and the forend attaches...

G2 Contender Grip with Picatinny Rail Black composite grip fits the G2 Contender and features a Picatinny accessory rail at the rear. This allows attachment of straight as well as folding buttstocks of all styles and shapes... Adding to the varsatility...

G1 Contender Grip with Picatinny Rail Black composite grip fits the G1 Contender and features a Picatinny accessory rail at the rear. This allows attachment of straight as well as folding buttstocks of all styles and shapes... Adding to the versatility...

T/C Contender PartsParts to fit G1 and G2 Contenders, SSK-50 270-CRC14 - Firing Pin Bushing, Contender, G2, SSK-50 270-CRC15 - Firing Pin Rimfire, Contender, G2, SSK-50 270-CRC15A - Firing Pin Centerfire, Contender, G2, SSK-50 270-CRC16 - Bushing Screw,...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

TC G1 Contender/SSK-50 Composite Buttstock - Full length Montecarlo styled buttstock fits original G1 Contender and SSK-50 frames (Does NOT fit the G2). Rigid and weatherproof composite construction with pistol grip and Limbsaver recoil pad. Includes...

SSK-50 Frame, Lynx Sided The Original Contender/SSK-50® design is back in production, thanks to the SSK Firearms company. It has been a long time and a big challenge to re-tool for independent production of this classic single shot action. This new...

Thompson CenterG1 Contender and SSK-50 Pistol Grip Composite pistol grip fits the original G1 Contender as well as the new SSK-50 frames. Comfortable ambidextrous shape with finger grooves and palm swell. Two part construction features hard plastic front...

TC Contender Pistol Accuracy Barrels® by EABCOStandard Model, Match Grade Barrels, 10" Pistol Length, Factory Blue Finish- Our TC Contender Accuracy Barrels® fit the TC Contender, G2 Contender, and SSK-50 frames. Manufactured by E. Arthur Brown...

TC Contender Pistol Accuracy Barrels ® by EABCOStandard Model, Match Grade Barrels, 10" Pistol Length, Stainless- Our TC Contender Accuracy Barrels® fit the TC Contender, G2 Contender, and SSK-50 frames. Manufactured by E. Arthur Brown Company...

17 HMR Blue TC Contender/SSK-50/G2 Accuracy Barrels® Twist 1:9, Standard Model, Match Grade Barrels by EABCO- We bring considerable experience to the making of our 17 HMR barrels. It all started with the 357 Super Mag from Handgun Metallic...

30-30 Winchester Blue TC Contender/SSK-50/G2 Accuracy Barrels® Twist 1:10, Standard Model, Match Grade Barrels by EABCO- We bring considerable experience to the making of our 30-30 Winchester barrels. It all started with the 357 Super Mag from...

Thumbhole Stock Set fits Original Contender (Shade Varies)Birch Laminate Thumbhole Buttstock and Forend Set- Custom designed for the Original Thompson Center G1 Contender (not G2) with raised cheek piece for optimum scope alignment with your eye...

KAK Compensator Kit9/16x24 fits 40 Cal- Includes Crush Washer- Often, 350 Legend Barrels are threaded 9/16x24 to avoid mounting a 22 or 30 caliber brake. The exit hole has to allow clearance for the .357 caliber 350 Legend bullet. The easy answer for...

T/C Contender and G2 Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Contender and G2 Contender hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

Encore Grip Bolt Set- the shorter 1.5” bolt fits MOST synthetic buttstocks, while the longer 2” bolt fits MOST laminate and wood buttstocks, but some laminates/wood need the shorter, and vice versa with synthetic. One of them will fit to...

TC Encore/Contender Barrel Locking Bolt Spring- This is the coil spring that powers the Locking Bolts in the barrel underlug of Thompson Center Encore Pro Hunter and Contender. The locking bolts are compressed against this spring when you squeeze the...

T/C Extractor Leaf Spring by EABCOThis is the little leaf spring that fits against the bottom of rimless extractors on Thompson Center accessory barrels. Rimless cartridges such as 223 Remington or 308 Winchester have a special extractor that flexes...

T/C Contender 45-70 Extractors are Tool Steel by EABCOThese 45-70 extractors are used for TC Contender and G2 Contender barrels that are chambered for the 45-70 Government cartridge. Our extractors are precision machined from tool steel forging. We...