ORYX Chassis Stock fits Savage Axis SA/RH - Black Chassis panels come in Black Weight: 4.2lbs LOP: 13 - 13.5" (Additional LOP with our spacer kit) Material: 6061 Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK pattern slots...

MDT GRND-POD PRS Bipod The MDT GRND-POD was designed to maximize versatility, as well as cost savings, while retaining features that are most important in a precision rifle bipod. The GRND-POD goes far beyond the typical Harris Bipods in features, like...

  This Allen Head screw kit includes one long screw 0.785", one short screw 0.475", and two washers.  This hardware kit is specifically made for the 127-7661 or 317-09-02-16 Forends.  These screws do NOT fit muzzle loader nor shotgun...

CZ Magazine 12004 fits 457, 455, Etc - 22 LR, 17 HM2, 10 Rnd, PolymerFactory replacement magazine for CZ 455, CZ 457, CZ 453, CZ 452, and CZ 512

EABCO Forend Washers fit T/C Encore Pro Hunter- These are replacements for the tiny little Washer/Spacers under the screws on TC Encore and Pro Hunter forends. We had a devil of a time finding a source for them and they are expensive. Forend washers are...

Legacy Magazine fits Remington 700 SA Detachable Mag Kit 10 Rounds - These magazines fit Remington 700 rifles that are converted to detachable magazine with the Legacy Sports Detachable Mag Kit. Sometimes referred to as "ammoboost" mags. These magazines...

KAK Compensator Kit9/16x24 fits 40 Cal- Includes Crush Washer- Often, 350 Legend Barrels are threaded 9/16x24 to avoid mounting a 22 or 30 caliber brake. The exit hole has to allow clearance for the .357 caliber 350 Legend bullet. The easy answer for...

CMMG Medium Taper 350 Legend Barrel...Medium Taper 16 inch 350 Legend barrel fits AR-15 platform. Perfect for building your custom AR-15 upper group. Comes with properly installed M4 barrel extension. All CMMG barrel sub-assemblies are properly...

Bullet-Button® AR-15 Patriot Mag Release- Based off the original Bullet Button magazine lock concept, this new Patriot Mag Release makes the operation more convenient. It's the Bullet Button RELOADED! This new kit is California 2020 compliant and...

AR-15 / AR-10 Bullet-Button®- This is the original magazine release lock for AR15/AR10 rifles to make them compliant with California's high capacity magazine laws. The law says the magazine must not be detachable conveniently. It must require "tools"...

ORYX Chassis fits Savage 10/110 LA/RH - OD Green Mag Compatibility - Long Action AICS 3.715"  aPlease check the size of your Long Action AICS Magazine...    (It's stamped right on it. Make sure it will fit!) Chassis panels come in...

EABCO Firing Pin SPRING fits TC Encore Pro Hunter- Replacement for the Thompson Center factory firing pin spring (that sometimes breaks). Our EABCO brand spring is made from a little thicker spring stock to give better durability. Expansion power and...

McFadden Colt M4 .22 LR Lightnin Grip Adaptor- Adapts the Lighnin Grip mag loader to reload Colt M4 .22 LR AR-15 Magazines. This is the adaptor only. The Lightnin Grip mag loader is sold separately. This adaptor also works on .22 LR AR-15 magazines for...

Lightnin' Grip AR15/22 CMMG Magazine Loader - Order Adapters Separately -The Lightnin' Grip Magloader comes from McFadden Machine... That's the genius behind the "Ultimate Cliploader" for Ruger MK pistols. Their Lightnin' Grip .22 LR Magazine loader has...

McFadden CMMG .22 LR Lightnin Grip Adaptor- Adapts the Lighnin Grip mag loader to reload CMMG .22 LR AR-15 Magazines. This is the adaptor only. The Lightnin Grip mag loader is sold separately. This adaptor also works on .22 LR AR-15 magazines by Sig522 ...

T/C Contender G2 Locking Bolt Set - Tool Steel by EABCO- Precision machined tool steel barrel locking bolts for TC Contender and G2 Contender barrels. 2021 was a worrisome time when S&W announced they were quitting the Thompson Center brand. We could...

Pistol Competition Kit for MK IV, Gold Trigger Trying to figure out which parts are needed to take the Ruger MK IV or MK IV 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes our MK IV Accurizing Kit and Bolt...

T/C Contender and G2 Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Contender and G2 Contender hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

EABCO Picatinny Scope Mount fits Ruger 10/22- This Precision Machined 10/22 Picatinny Rail mounts to your existing 10/22 scope mounting holes and gives superior alignment and rigidity for the best accuracy potential. It's totally machined from aircraft...

CMMG Dedicated 22LR AR15 Barrel M4 ContourBuild a TRUE .22 LR AR-15! This barrel is a true 1:16 twist rimfire barrel with an integral .22 LR chamber. It requires a dedicated .22 LR bolt assembly (sold separately) and .22 LR AR-15 magazines (also sold...