HandALL® Jr. Grip Sleeve (Small) - Slate Grey Slip-On Grip for a wide range of smaller, compact handguns. Fits most .22, .25, and .38 pistols. FITMENTS  (* = may require trimming)This grip will fit and function well on the following...

TC Encore Accuracy Barrel® 22-250 Remington, 26" Blue, 1:12 Twist For shooters chasing maximum precision, this 22-250 Remington barrel from E. Arthur Brown Co. is built to deliver. At 26" in a heavy contour profile, it’s tailored to...

TC Encore Accuracy Barrel – 22 ARC, 26" Blue, 1:7 Twist Designed for precision shooters who demand consistency, this 22 ARC barrel from E. Arthur Brown Co. is built to exceed expectations. At 26" with a heavy contour profile, it’s tailored...

Henry Lever Supreme Handguard by RPA tactical styled M-LOK handguard that fits the Henry Lever Action Supreme Rifles... Fits All Henry Lever Supreme Rifles with Fast Install. All parts type 3 hard anodized 6061 aluminum for lifetime durability. A...

TC Encore Accuracy Barrel 20 ga. Rifled Shotgun 26" StainlessMatch Grade Rifle Bore, 2¾" Chamber, and 11 Degree Target Crown 1:24 Twist Our 20 ga. Rifled Slug barrel for the Encore Pro Hunter is optimized for accuracy. We use the same barrel...

TC Encore Accuracy Barrel 20 ga. Rifled Shotgun 26" BlueMatch Grade Rifle Bore, 2¾" Chamber, and 11 Degree Target Crown 1:24 Twist   Our 20 ga. Rifled Slug barrel for the Encore Pro Hunter is optimized for accuracy. We use the same barrel...

Blue TC Encore Accuracy Barrels® by EABCO22 Creedmoor 1:7, Standard Model, Match Grade BarrelsTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

Hogue 10/22 Stock .920 OverMolded Black  - OverMolded Stocks start with a super strong, rigid, fiberglass reinforced bedding block that precisely fits the guns' action. This bedding block is then OverMolded with a durable but soft synthetic...

Hogue EZG Pre-Sized Savage Recoil Pad Hogue pre-sized recoil pads are made with an exclusive recoil reducing cushioned elastomer bonded to a super rigid polymer alloy base plate. These pads feature computer designed internal cushion construction combined...

Hogue Pillar Bed Stock fits Standard Savage Barrel Contour,Long Action, Top Loading Box Magazine  Models 110, 111, 114, & 116 Fits Standard Factory Tapered Barrel Fits Long Action Top Loading Box Magazine  - Models 110, 111, 114, &...

Thread Protector fits Large Caliber 11/16 x 24 Stainless  Beautiful knurled stainless thread protector in 11/16x24 thread with length of .625" and outside diameter of .820" Compatible with new TC ProHunter large caliber barrels (over 30 cal)  

Accelerator Thumb Ledge for Ruger Mark IV 22/45 Provides stability and control for follow-on shots Encourages proper grip Simple, non-permanent installation TANDEMKROSS’s new Accelerator Forward Thumb Ledge helps improve grip and control. With...

The Ultimate Trigger Kitfor the Ruger MKIV & MKIV 22/45 RedThis “Ultimate” Kit for Ruger® Mark IV™ & Mark IV 22/45™ is a matched set of upgrade parts - DO NOT use any other brand of sear and hammer with the TANDEMKROSS...

Colt SA Revolver RP Shooters Pak This Shooter's Pak includes a Wolff reduced power mainspring, a reduced power sear/bolt spring (flat-type), extra power base pin spiring and stainless steel hand ejector spring. These kits offer great improvement in the...

Colt SAA Revolver RP Shooters Pak This Shooter's Pak includes a Wolff reduced power mainspring, a reduced power sear/bolt spring (wire-type), extra power base pin spiring and stainless steel hand ejector spring. These kits offer great improvement in the...

Encore Pro Hunter Forend 8 Inch with Picatinny Rail A short forend for TC Encore Pro Hunter Barrels and Frames. Includes two 8-40 x 7/16" screws and will attach to pistol spaced forend holes. The barrel channel will accomodate barrels up to .824" in...

Encore Pro Hunter Forend 11 Inch with Picatinny Rail A long forend for TC Encore Pro Hunter Barrels and Frames. Includes two 8-40 x 7/16" screws and will attach to either pistol or rifle spaced forend holes. The barrel channel will accomodate barrels up...

TC Contender Forend 9.5 Inch with Picatinny Rail A full featured forend for G1 and G2 Contender and well as SSK-50 Barrels and Frames. This forend uses a unique "hanger bar" attachment system. The hanger bar attaches to the barrel and the forend attaches...

TC Contender Forend 7 Inch with Picatinny Rail A full featured forend for G1 and G2 Contender and well as SSK-50 Barrels and Frames. This forend uses a unique "hanger bar" attachment system. The hanger bar attaches to the barrel and the forend attaches...

Encore Pro Hunter Grip with Picatinny Rail Black composite grip fits the Encore Pro Hunter and features a Picatinny accessory rail at the rear. This allows attachment of straight as well as folding buttstocks of all styles and shapes... Adding to the...