MDT Field Stock Chassis fits Savage Axis SA The MDT FIELD stock chassis gives solid Axis bedding and AICS magazine compatibility at an affordable price. It has all of the advantages of a chassis but in a lighter, warmer, and more familiar feeling stock...

Lever Gun Torx Screw KitsUpgrade Your Henry, Marlin, or Rossi Rifle For years the gun industry has used slot headed screws for the receivers on guns. Back in the day, tooling and fabrication what it was, it was about the only choice. These days we have...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

 YoDave CZ-452 Plus 10 Striker Spring Upgrade your worn or weak CZ-452 striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. Also fits 453, 455, and 513 models. All benchrest...

DURAMAG SS 400 LEGEND Magazine - 5 Rnds A Legendary caliber deserves a legendary magazine and the 400 Legend Duramag SS delivers the only purpose built magazine for this caliber. With these Duramag SS mags you’re getting 400 Legend specific rib...

TC G1 Contender/SSK-50 Composite Buttstock - Full length Montecarlo styled buttstock fits original G1 Contender and SSK-50 frames (Does NOT fit the G2). Rigid and weatherproof composite construction with pistol grip and Limbsaver recoil pad. Includes...

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and target trigger (including polished plunger and spring)...

Volquartsen Lightweight Carbon Fiber 10/22 Barrel The Lightweight Carbon Fiber Barrel sets the standard for a lightweight barrel - bull barrel match accuracy at half the weight! A stainless steel barrel fitted with a woven carbon fiber tube creates an...

T/C Omega/Encore 209 Breech PlugDirect Replacement for the Original TC 7763 Breech Plug Fits Original 209x50 Encore and Omega Muzzleloaders Does NOT fit Pro Hunter, Endeavor, FX, nor Speed Breech Uses Standard 209 Primers If you've been looking for a...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

SSK-50 Frame, Lynx Sided The Original Contender/SSK-50® design is back in production, thanks to the SSK Firearms company. It has been a long time and a big challenge to re-tool for independent production of this classic single shot action. This new...

SSK-50 RECEIVER, Flat-Sided The SSK-50 Receiver is the modern revival of the original Contender design, now produced with advanced materials and precision manufacturing. This flat-sided stainless steel receiver is compatible with TC G1/G2 barrels, grips,...

These Pro Hunter screws (two long screws 0.785") with washers work on the Pro Hunter (Flex Tech) Rifle Forends. New Flex Tech forends already include these screws and washers so, if you are ordering a new forend, you do not need to order these screws. We...

Our Mil-Spec Rifle Length Buffer Tube Kit consists of a 10" fixed position buffer tube, heavy 5.6 oz buffer assembly and an 11.5" pre-loaded steel spring. The buffer tube is made of T6-6061 aluminum and is designed to fit any A1/A2 fixed position...

AR-15 Gas Block – Low Profile .936" Steel Designed for larger-diameter barrels and compact builds, this .936" Low Profile Gas Block delivers strength and simplicity. Crafted from rugged 4150 steel with mil-spec specs and a non-reflective matte...

.750 Low Profile Steel Gas Block – Includes Roll Pins & Wrench Engineered to keep your AR-15 build sleek and field-ready, this low profile steel gas block is a staple upgrade for anyone running .750” diameter barrels. Made from hardened...

This is a standard AR-15 Micro Sized Gas Block. Designed with the minimum profile to fit under nearly any handguard system, it snugly fits standard .750 diameter barrels. Has a shallow "cut" mark in the front face for those who want to do witness marking...

A Standard AR-15 Charging Handle. Mil-Spec 6061-T6 Aircraft Aluminum Smooth Operation under Extreme Conditions Black Finish Fits: AR-15 E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

KAK Crush Washer 9/16x24 fits AR15 350 Legend - Often, 350 Legend Barrels are threaded 9/16x24 to avoid mounting a 22 or 30 caliber brake.- Our KAK Crush Washer 9/16x24 allows DIY-ers to time their muzzle treatments onto their threaded barrels.9/16 x...