T/C Encore 300 Win Mag Extractors are Tool Steel by EABCO   The 300 Win Mag extractor is used for TC Encore and Pro Hunter barrels chambered in 300 Winchester Magnum and 7mm Remington Magnum. Our extractors are precision machined...

T/C Encore 35 Whelen Extractors are Tool Steel by EABCO   The 35 Whelen extractor is used for TC Encore and Pro Hunter barrels chambered in 35 Whelen. Our extractors are precision machined from tool steel billet. We...

T/C Encore 6.5x284 Extractors are Tool Steel by EABCO   The 6.5x284 extractor is used for TC Encore and Pro Hunter barrels chambered in 6.5 x 284 Norma, .284 Winchester, and anything else based on .284 Winchester brass. Our...

T/C Encore PPC Extractors are Tool Steel by EABCO   The PPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6mm PPC and 22 PPC. Our extractors are precision machined from tool steel billet. We...

T/C Encore Hornet Extractors are Tool Steel by EABCO   The "Hornet" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 Hornet, 22 K-Hornet, 17 Hornet, 17 Ackley Hornet... Basically any cartridge that is...

TC Contender Barrel Dovetail Locks (Qty 2) by EABCO  Dovetail locks install into slots under G2 and Contender barrels and provide forend mounting points. Precision machined from tool steel by E. Arthur Brown Company, Inc and replaces TC...

Standard AR15 A2 Flash HiderScrews on to your threaded barrel. 1/2x28 tpi. Overall length approximately 1.75 inches. Also works great as a thread protector.  

AR15 barrel nut shim for free float handguard/quad rail. • Helps improve torque, timing, indexing, alignment of barrel nut • This 0.32mm stainless steel shim fits between the barrel nut and upper receiver • Works with .223/5.56/300 AAC Blackout • Does...

Ruger 10/22 Talon Ambidextrous Thumbhole Stock - Shade Varies  The "Talon" styled gun stock has an ambidextrous design, perfect for left handed and right handed shooters.  Its ergonomic grip and raised cheek piece give this stock a great feel...

Savage Accuracy Recoil Lug - Matte Black Replaces stamped Savage recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Savage factory recoil lugs are stamped not machined. Their...

Walnut TC Encore Thumbhole Buttstock - Left Hand (LH)Length of pull: 14"Fits: Encore and Pro Hunter frames

Ruger BX-15 Magazine for the Ruger 10/22  This genuine Ruger® 15 round factory magazine with Ruger® logo has been tested and has proven to feed as reliably as the standard BX-1 10-round Ruger® rotary magazine. This level of reliability...

Savage Barrel Lock Nut Lock nut to secure barrel to receiver. Screw the barrel in to set headspace, then tighten the lock nut. Precision machined to close tolerances for optimal fit, alignment, and concentricity. This nut features squared grip notches to...

TC Encore Heavy Barrel Walnut Stock & Forend SetStandard buttstock and forend for the TC Encore & ProHunter rifles.  Drop-In Fit: These buttstocks are completely inletted for the Encore frame. Remove your original stock, slip this one...

T/C Encore 308 Extractors are Tool Steel by EABCO   The "308" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 BR, 22-250 Rem, 6mm BR, .308 Win, 7-08 Rem, 243 Win, 260 Rem, 6.5x47 Lapua, 6.5 Creedmoor, 30-06, 25-06,...

Encore Tool Steel Locking Bolts by EABCO- Precision machined tool steel barrel locking bolts for TC Encore and Pro Hunter barrels. 2014 was a worrisome time of shortages in the gun industry. We tooled up to machine these excellent locking bolts from tool...

Composite Forend for TC Encore Pro Hunter Rifle Barrels - Black Upgrade your TC Encore or Pro Hunter rifle with this versatile Composite Forend. Designed to adapt and flex to fit the barrel contours of 24", 26", and 28" barrels, this forend combines...

Aero Precision Gen 2 Stripped AR15 LowerMachined to mil-spec dimensions, Aero Precision lowers work with standard AR15 components and ensure the highest quality with a correct component interface. Mil-Spec 7075-T6 aluminum forgings are CNC machined to...

- This Ruger 10/22 Handguard installs on 10/22 rifles with the standard factory (tapered) contour barrel. A retainer clip on the underside of the handguard snaps over the barrel and holds the guard securely in place. Vents help keep your barrel cool...

Increase your fire power 100% with these Magazine Connectors (magazines not included). Constructed of two steel plates on front and back and a plastic filler block in the center. This superior design has several advantages. Both magazines point upward...