Remington 700 Accuracy Recoil Lug - Matte Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN be...

Remington 700 Accuracy Recoil Lug - Matte Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

Remington 700 Accuracy Recoil Lug - Bright Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

EABCO Remage Barrel Nut – Precision Fit for Remington 700 Pre-Fit Barrels The Remage Barrel Nut is at the heart of our re-barreling system for the Remington 700, allowing it to use a pre-fit barrel system without modifying the receiver. This nut...

Contender M4 Buttstock Adapter This T/C Contender/SSK-50 Grip adapts most Mil Spec AR15/M4 buttstocks to fit the Thompson Center Contender receiver. This item is the Adapter only and does not include an M4 Buttstock and Mil Spec Buffer Tube.

T/C Encore 6.8 Rem SPC Extractors are Tool Steel by EABCO   The 6.8 Rem SPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6.8 Rem SPC as well as 224 Valkyrie. Our extractors are precision machined from tool steel billet...

T/C Encore 450 Bushmaster Extractors are Tool Steel by EABCO   The 450 Bushmaster extractor is used for TC Encore and Pro Hunter barrels chambered in 450 Bushmaster. Our extractors are precision machined from tool steel billet. We...

ORYX Savage 10 SA/RH Chassis Stock - Flat Dark Earth Chassis panels come in Flat Dark Earth (FDE) Weight: 4.2lbs LOP: 13 - 13.5" (Additional LOP with our spacer kit) Material: 6061 Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips...

Choate Tactical Stock for Savage Version II Left Hand Fits Detachable Mag Rifles Where the Latch is on the Magazine Full length bedding block (see cutaway picture) Fits Detachable Mag Rifles where the latch is on the mag Adjustable butt spacer system to...

T/C Encore 45-70 Govt Extractors are Tool Steel by EABCO   Replacement extractors fit Thompson Center Encore/Pro Hunter barrels chambered for 45-70 Govt. The T/C factory extractors are molded and then machined. Our replacements are...

Ruger BX-25 Magazine 2-PackTwo 25 Round Ruger 10/22 Magazines- This genuine BX-25 Ruger® factory magazine with Ruger® logo has been tested and has proven to feed as reliably as the standard BX-1 10-round Ruger® rotary magazine. This level of...

AR Bolt Release Extension- This AR-15 Extended Bolt Release Lever allows right-handed shooters to release the bolt catch without moving the firing hand from the grip. In the case of High Power Rifle Competition, there is no more reaching...

Original Bob Sled 6mm-15 Match Single Shot Conversion Mag- The 6mm-15 Bob Sled fits AR-15 pattern rifles that are chambered in the wide body cartridges such as the 6.8 SPC, 224 Valkyrie, 22 Nosler, 6mmAR, 6 PPC, 6mm ARC, .224AR, 6mmAR...

Original Bob Sled AR-10 Match Single Shot Conversion Mag - FITS ARMALITE (NOT DPMS)- The AR-10 sled fits only ArmaLite pattern AR-10 rifles and provides a single shot loading bed or follower to allow the easy loading and firing of single rounds...

Original Bob Sled AR-15 Match Single Shot Conversion Mag- The AR-15 Bob Sled provides a single shot loading bed or follower to allow the easy loading and firing of single rounds during competition, benchrest , or varmint shooting. Made from durable, long...

Thumbhole Stock Set fits G2 Contender - Shade VariesCamo Laminate Thumbhole Buttstock and Forend Set - Custom designed for the Thompson Center G2 Contender with raised cheek piece for optimum scope alignment with your eye. Thumbhole grip angle...

Thumbhole Stock Set fits G2 Contender - Shade VariesBrown Laminate Thumbhole Buttstock and Forend Set- Custom designed for the Thompson Center G2 Contender with raised cheek piece for optimum scope alignment with your eye. Thumbhole grip angle is...

Thumbhole Stock Set fits G2 Contender - Shade VariesGray Laminate Thumbhole Buttstock and Forend Set - Custom designed for the Thompson Center G2 Contender with raised cheek piece for optimum scope alignment with your eye. Thumbhole grip angle is more...

Thumbhole Stock Set fits G2 Contender (Shade Varies)Gray Laminate Thumbhole Buttstock and Forend Set- Custom designed for the Thompson Center G2 Contender with raised cheek piece for optimum scope alignment with your eye. Thumbhole grip angle is more...

Contender G2 Stock Set - Shade VariesCamo Laminate Factory Style Buttstock and Forend Set - Custom made for the Thompson Center G2 Contender. Standard factory styling but made of rich Camo Laminate hardwood with a weather resistant satin...