Savage AICS Bottom Metals These are the Savage OEM Premier direct drop-in bottom metals that fit the Savage Accu-Stock and others with the factory Accu-Stock compatible inletting. Fits Savage 10/110 Model Accu-Stock Does NOT Fit Axis Models Fits Rifles...

MDT Field Stock Chassis fits Savage Axis SA The MDT FIELD stock chassis gives solid Axis bedding and AICS magazine compatibility at an affordable price. It has all of the advantages of a chassis but in a lighter, warmer, and more familiar feeling stock...

Lever Gun Torx Screw KitsUpgrade Your Henry, Marlin, or Rossi Rifle For years the gun industry has used slot headed screws for the receivers on guns. Back in the day, tooling and fabrication what it was, it was about the only choice. These days we have...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

 YoDave Marlin 39A Reduced Power Hammer Spring Reduce the force required to open your lever and cycle the bolt by reducing the force of the spring acting on the hammer without sacrificing consistent primer strikes and ignition, ease of cycling is...

 YoDave CZ-452 Plus 10 Striker Spring Upgrade your worn or weak CZ-452 striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. Also fits 453, 455, and 513 models. All benchrest...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

DURAMAG SS 400 LEGEND Magazine - 5 Rnds A Legendary caliber deserves a legendary magazine and the 400 Legend Duramag SS delivers the only purpose built magazine for this caliber. With these Duramag SS mags you’re getting 400 Legend specific rib...

Blue TC Encore Accuracy Barrels® by EABCO 360 Buckhammer 1:12, Standard Model, Match Grade Barrel TC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail, precision,...

ORYX Chassis Stock fits Savage Axis LA/RH - BLACK Chassis panels come in BLACK Weight: 4.2 lbs LOP: 13 - 13.5" (Additional LOP with our spacer kit) Material: 6061 Finish: MIL Spec Type III hard anodize Accepts Standard Grips (included) M-LOK pattern...

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and target trigger (including polished plunger and spring)...

Volquartsen Lightweight Carbon Fiber 10/22 Barrel The Lightweight Carbon Fiber Barrel sets the standard for a lightweight barrel - bull barrel match accuracy at half the weight! A stainless steel barrel fitted with a woven carbon fiber tube creates an...

T/C Omega/Encore 209 Breech PlugDirect Replacement for the Original TC 7763 Breech Plug Fits Original 209x50 Encore and Omega Muzzleloaders Does NOT fit Pro Hunter, Endeavor, FX, nor Speed Breech Uses Standard 209 Primers If you've been looking for a...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

SSK-50 Frame, Lynx Sided The Original Contender/SSK-50® design is back in production, thanks to the SSK Firearms company. It has been a long time and a big challenge to re-tool for independent production of this classic single shot action. This new...

SSK-50 RECEIVER, Flat-Sided The SSK-50 Receiver is the modern revival of the original Contender design, now produced with advanced materials and precision manufacturing. This flat-sided stainless steel receiver is compatible with TC G1/G2 barrels, grips,...

Thompson CenterG1 Contender and SSK-50 Pistol Grip Composite pistol grip fits the original G1 Contender as well as the new SSK-50 frames. Comfortable ambidextrous shape with finger grooves and palm swell. Two part construction features hard plastic front...

These Pro Hunter screws (two long screws 0.785") with washers work on the Pro Hunter (Flex Tech) Rifle Forends. New Flex Tech forends already include these screws and washers so, if you are ordering a new forend, you do not need to order these screws. We...

Black Nitride AR15 Bolt Carrier Group Shot Peened Black Nitride Finish w/No Logo Fits 223 Rem, 5.56 NATO, 300 Blackout, 350 Legend, etc.    Precision machined complete BCG (Bolt Carrier Group) with Black Nitride finish for the excellent...