TriggerTech Diamond fits Remington 700 Clones, Traditional Curved Black Trigger

  • TriggerTech Diamond fits Remington 700 Clones, Traditional Curved Black Trigger
  • Rem700 CLKR - Externally "Click" Adjustable Pull Weight
  • Rem700 FRT - Friction Release Technology
  • Rem700 TKR - Short Overtravel and Reset Ticker


TriggerTech Diamond fits Remington 700 Clones, Traditional Curved Black Trigger
The Rem700 Diamond Adjusts from 4 oz to 32 oz.... It is truly zero creep and is the most consistent and crisp breaking trigger you will ever use. The diamond will make you aware of the creep that exists in other triggers. It features new variable rate adjustment technology that enables quick and confident adjustment from <4oz – 32oz with TriggerTech’s patented CLKR Technology™. The adjustment feature utilizes externally accessible set screw and the adjustment range begins at ~0.2 oz/click from <4 oz to ~9 oz and the changes to ~1 oz click from ~9 oz to 32 oz. Due to the exceptionally crisp break, most shooters report the pull weights feeling significantly lighter than a friction based trigger of the same measured weight. Five of the critical Diamond components are assembled as matched set to enable a true zero-creep break, extremely short overtravel and offers outstanding reliability, even in the harshest environments. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots more than you ever thought possible.
  • Adjusts from 4-32 oz in .2 oz Clicks
  • Adjustable Externally for Convenience
  • For Rem 700 Cloned Actions Only
  • FRT - Frictionless Release Technology
  • TKR - Short Overtravel and Reset "Ticker"
  • CLKR - Click Adjustable External Screw and Detent
  • Traditional Curved Black Trigger has Grooved Face
  • No Bolt Release
  • Right Hand
Factory 700 w/Bolt Release vs. R700 Clones - Clones are rifle brands that use the identical "footprint" of the factory Remington 700. They fit the same barrels, accessories, and stock inletting as the factory 700. The differences are that the clones all have the Bolt Release on the side of the receiver instead of the the little sheet metal tab on the bottom of Remington factory triggers. So, if you're buying your new trigger for an R700 Clone, be sure to get the one without the bolt release. Also, Clones are usually closer fitting and overall better made than the original Remington factory guns were... Modern manufacturing techniques can incorporate many of the custom improvements into R700 Clones that used to be done to Remington 700 rifles to customize and improve their function and accuracy. Here are the names of some R700 Clones you may recognize: Bergara B14, Defiance, Curtis Custom, Christianson Arms, Bergara, and Pacific... To name a few.
All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pull weights to vary above the advertised range***
View AllClose

Additional Information

Item Type:
Remington 700
Remington 700 Series
Ships Internationally
Curved Trigger
Trigger Style:
Right Hand
Weight of Pull:
View AllClose

Recommended for You