Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Black Mamba Uppers. Includes Patridge Front Sight and Target Adjustable Rear Sight. Fits Volquartsen 4.5 inch LLV...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel extractor for better function and reliability. The Exact...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIII and 22/45 to the next level? Look no...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger. Complete drop-in kit for the Ruger MKII and MKII 22/45 to...

Volthane Grips for Ruger the Ruger Mk III PistolFamous "Volthane" grips by Volquartsen fit the Ruger Mk III (will not fit the 22/45 models). Designed to position your hand exactly the same every time you grip the pistol, these grips are an aid to...

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory dovetail, locks in place with two set screws. Made of...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

Volquartsen SureStrike Firing Pin for Ruger MK I, II, III and IV (Including 22/45)   This SureStrike firing pin is designed to eliminate light strikes on the Ruger MK I, II, III and IV pistols (including 22/45). Machined .004" wider than...

Ruger MKII Hammer Bushing by Volquartsen  This MKII Hammer Bushing is precision manufactured by "Swiss" screw machine equipment. The hammer pivot pin hole has been drilled & reamed for improved precision to help eliminate variances (wobble or...

Volquartsen Machined Disconnector for Ruger Mk II/III PistolsThis new Volquartsen disconnector is CNC Machined for a better fit and function over the stamped factory disconnector.  The additional width of this new disconnector gives increased...

Volquartsen Target 22 Style Frame fits Ruger MKII and MKIIIA Complete Aluminum Lower Frame Replacement... Includes Volquartsen Accuracy System Internal PartsOur Volquartsen Custom Target Frame is CNC machined from aluminum alloy. Weighing only 7.1 oz, it...

Volquartsen Laminated Right Hand Target Grips for Ruger MkIIILaminated Target Grips by Volquartsen for the Ruger Mk III (will not work on the 22/45 series) Features: Thumbrest Heelrest Finger grooves. Designed to give the shooter a relaxed, steadier...

Main Spring Assemblies for Ruger Mk II, IIIPrecision made replacement for factory main spring assembly. Wire EDM and CNC machined to give the best fit and performance. Mk II and III version differs from 22/45 version due to grip angle difference in the...

Ruger MKIV Frame Lug This lug is precision machined for improved fit. Slight variances to the factory lug (as shown with the yellow circle in the additional image) can cause unnecessary wear to the Mark IV upper as well as aftermarket uppers like the...

Scorpion Frame fits All Ruger MKII and MKIII Barrels No FFL Required... Order and take delivery personally! All Aluminum Lower Frame for Ruger Mark II, III, and 22/45 Completely Assembled w/Volquartsen Competition Parts Drop-In Ready... Fits All Ruger...

Volquartsen VC4LLV-6 Competition Upper 6'' fits Ruger MKIV and MKIV 22/45- This replacement barrel ("upper") is a superb upgrade for your Ruger MK IV. It's extremely lightweight, well-balanced, and offers match grade accuracy. The Volquartsen Black Mamba...

Ruger Mark II/III and 22/45Volquartsen Scorpion LLV Competition Pistol Barrel- Black 6'' Scorpion LLV replacement barrel (upper) for Ruger Mark II, III, and 22/45 pistols. A CNC-machined billet aluminum receiver is the foundation of this lightweight...

Volquartsen Assembled Lower Frame for Ruger Mark II, Mark III, 22/45A Completely Assembled Lower Frame Replacement... Includes Volquartsen Accuracy System Internal Parts  Our Volquartsen Custom 1911 Style Frame is CNC machined from aluminum alloy...