Volquartsen

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take...

Volquartsen Lightweight Carbon Fiber 10/22 Barrel The Lightweight Carbon Fiber Barrel sets the standard for a lightweight barrel - bull barrel match accuracy at half the weight! A stainless steel...

Pistol Competition Kit for MK IV, Gold Trigger Trying to figure out which parts are needed to take the Ruger MK IV or MK IV 22/45 to the next level? Look no further than the Pistol Competition Kit...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and...

Scorpion LLV Compensator A unique pistol comp designed for Scorpion Pistols and their Scorpion LLV barrels. CNC-machined from billet material to match the upper profile and then finished to match. A...

Volquartsen Extended Bolt Release fits Ruger Mark IV Black Slightly Longer and Wider... Makes Releasing the Bolt Easier! Fits Ruger MKIV (Not MKIV 22/45) Finding it too hard release the bolt...

Volquartsen SW22 Victory Laminated Grip - GrayLaminated wood target grips feature thumb rest, heel rest and finger grooves. Designed to give the shooter a relaxed, steadier hold. CNC-machined...

Laminated Target Grips for MK IV 22/45 YES... Target Grips for the 22/45! They feature thumb rest, heel rest and finger grooves. Designed to give the shooter a relaxed, steadier hold. CNC-machined...

Volquartsen Exact Edge Extractor for Remington 870 and 1100The Exact Edge Extractor is manufactured through an EDM process (not an inferior MIM process) to produce exacting tolerances. The new...

Volquartsen Ruger MK IV® Accurizing Kit This complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Target Trigger with plunger and...

Volquartsen Gold* Bolt fits Ruger MKII, MKIII, MKIVCNC Machined Competition Bolt is Finished in Gold* Colored Titanium Nitride (TiN)- If you're looking to eliminate stovepipes, jams, and failure to...

Main Spring Assemblies for Ruger Mk II 22/45 and Mk III 22/45 PistolsPrecision made replacement for factory main spring assembly. Wire EDM and CNC machined to give the best fit and performance. Mk II...

Magazine Base Pads fit Ruger MKIV Mags (Not 22/45)- Our new Volquartsen Magazine Base Pads for the Ruger MK IV (will not fit Ruger MK IV 22/45) provide more positive magazine insertion, easier...

Magazine Base Pads fit Ruger MKIV Mags (Not 22/45)- Our new Volquartsen Magazine Base Pads for the Ruger MK IV (will not fit Ruger MK IV 22/45) provide more positive magazine insertion, easier...

Volquartsen Mk IV and Mk IV 22/45 Competition KitAlso Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take...

Volquartsen Safety Power Spring fits Ruger MKIV- The MKIV safety is very easy to engage... And sometimes you might engage it when you don't want to... Like when you are shooting in a competition. Our...

Volquartsen Target Hammer Kit for the Ruger 10/22- The target hammer kit was designed to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory hammer (Not for...

Ruger MKIV V-Lock Retainer- An improved bolt stop pin retainer keeps the Ruger MKIV Bolt Stop Pin from drifting or walking out on its own. If you are having issues with the Bolt Stop Cross Pin...

Volquartsen SureFeed Follower Springsfor Ruger MK II, MKIII, and MKIV Magazines- The SureFeed Magazine Follower Spring for the Ruger MK II, MKIII, and MKIV is 25% stronger than the factory spring...

Volquartsen Extended Magazine Release for MKIV 22/45- Our new Extended Magazine Release for the MKIV allows magazines to sit a little higher for better and more reliable feed. This improves feeding...

Volquartsen Magazine Base Pad fits Ruger MKIV 22/45- Our new Magazine Base Pads for the MK IV 22/45 make magazine insertion and removal quicker and easier-for lightning fast reloads. CNC-machined...

Volquartsen Magazine Base Pad fits Ruger MKIV 22/45- Our new Magazine Base Pads for the MK IV 22/45 make magazine insertion and removal quicker and easier-for lightning fast reloads. CNC-machined...

Volquartsen Bolt Tune-Up Kit for Ruger 10/22 - Corrects most cycling issues with a simple parts swap.- Upgrades your 10/22 firing pin and extractor to eliminate light hits and stovepipes. The...

Volquartsen Single Port LLV Compensator- Easy to clean 22 compensator for Volquartsen LLV Barrels/Uppers. Has a single port allowing the compensator to be cleaned without removing it from the LLV...

Ruger Mark II/III and 22/45Volquartsen Scorpion LLV Competition Pistol Barrel- Black 6'' Scorpion LLV replacement barrel (upper) for Ruger Mark II, III, and 22/45 pistols. A CNC-machined billet...

Ruger Mark II/IIILLV Competition Pistol Upper- Black 4.5'' model LLV replacement barrel (upper) for Ruger Mark II and Mark III pistols. A CNC-machined billet receiver is the foundation of this...

Patridge style target sight fits on 4.5'' Volquartsen LLV (Mk II/III) and LLV4 (Mk IV) Competition Pistol Uppers.

Volquartsen Competition Bolt for Ruger Mk II, III, and IVEliminate stovepipes, failures to fire and improve the overall performance of your Ruger Mark II, III*, IV or Mark IV 22/45 pistol with this...

Ruger Mk IV Laminated Wood Pistol GripGray, Right Handed, by VolquartsenTarget grips feature thumbrest, heelrest and finger grooves. Designed to give the shooter a relaxed, steadier hold...

Ruger Mk IV Laminated Wood Pistol GripBrown, Right Handed, by VolquartsenTarget grips feature thumbrest, heelrest and finger grooves. Designed to give the shooter a relaxed, steadier hold...

Ruger Mk IV Laminated Wood Pistol GripBrown/Gray, Right Handed, by VolquartsenTarget grips feature thumbrest, heelrest and finger grooves. Designed to give the shooter a relaxed, steadier hold...

Volquartsen V-Cut Single Port LLV-4 Compensator BlackScrew on compensator/muzzle brake fits the Volquartsen LLV-4 Upper (barrel) for Ruger® MK IV® pistols. Beautifully shaped to match the...

Volquartsen Accessory Rail for LLV Barrels  Under barrel Picatinny accessory rail fits both Picatinny and Weaver style accessories. Mounts with two 8-32 screws under LLV barrels. Newer...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Black Mamba Uppers. Includes Patridge Front Sight and Target...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the...

Volquartsen Aluminum Checkered Grip for Ruger 22/45- LAST ONE!  Improve the look and feel of your Ruger 22/45 with Aluminum Alloy Grips. These precision machined and anodized grip panels from...

Hi-Viz 4.5" Fiber Optic Front Sight for the LLV/Scorpion Screws on to 4.5" Volquartsen LLV and Scorpion Uppers. These drop-in sights use existing pre-drilled & tapped holes. Mounting Screws...

Volquartsen 10/22 BoltIncludes Custom Rod and Spring with Buffer  Complete CNC-Machined Bolt features our hardened and tuned extractor for positive, consistent extraction. It also includes...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger...