Bases and Mounts

 Mil Spec Picatinny Ruger 10/22 Scope Mount. This Tactical Ruger 10/22 mount is precision machined to meet Mil Spec Picatinny (Weaver style) dimensions, mounts with four screws (included) and is finished matte black. You'll need a good set of rings....

Warne 2-Piece Base fits Savage 10/110 Pre 2003- Pre-2003 Savage bolt guns had receivers with a round front and flat rear. Modern 1-piece bases won't fit these guns. This 2-piece base matches the pre-2003 receiver profile perfectly. Take a look at the top...

EABCO Picatinny Scope Mount fits Ruger 10/22- This Precision Machined 10/22 Picatinny Rail mounts to your existing 10/22 scope mounting holes and gives superior alignment and rigidity for the best accuracy potential. It's totally machined from aircraft...

Original TC Encore Keylock Scope Base- Weaver style, fits TC Encore and Pro Hunter barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions).  Take...

Original TC Encore Keylock Scope Base- Weaver style, fits TC Encore and Pro Hunter barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions).  Take...

T/C Encore 20 MOA Scope BaseAdds 20 Minutes Of Angle for Long Distance Shooting- Here's how it works: This Encore 20 MOA scope base adds 200 inches of elevation at 1000 yards. A typical scope that adjusts ¼" per click at 100 yards takes about 80 clicks...

T/C Encore Pro Hunter 20 Ga. Scope Mounting Base    We've redesigned our Extended Eye Relief scope base especially for the T/C Encore Pro Hunter 20 ga Slug and Turkey barrels. Based on our World Famous 6-Screw Keylock design, this scope mount...

Extended Eye Relief Scope Base for TC Contender/G2  Fits TC Contender and G2 barrels. This new mount extends forward to give longer eye relief when mount a riflescope on your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Picatinny Rail Scope Base for TC Contender/G2- Fits TC Contender and G2 barrels. This new mount provides milspec Picatinny mounting compatibility for your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel 4-hole scope mount pattern...

TC Encore Pro Hunter EER Scope Base Precision machined Extended Eye Relief (EER) scope base for TC Encore, Pro Hunter, Omega, Triumph and Impact barrels. Standard 4-Screw mounting with option for FREE 6-Screw mounting. Super rigid, precisely straight...

TC Encore Pro Hunter EER Scope Base Precision machined Extended Eye Relief (EER) scope base for TC Encore, Pro Hunter, Omega, Triumph and Impact barrels. Standard 4-Screw mounting with option for FREE 6-Screw mounting. Super rigid, precisely straight...

T/C Encore Pro Hunter Picatinny Scope Mount   At last a true Picatinny spec scope mounting base for the TC Encore and Pro Hunter. Based on our world famous, 6-Screw Keylock design, this scope base is precision machined for straightness and rigidity....

EABCO Ruger 10/22 Scope MountPrecision Machined Weaver Style Scope Mounting Base   Our EABCO Ruger 10/22 Scope Mounting Base is precision machined to optimize the base for the very best ring engagement, alignment, and rigidity. No molding or...

JPoint/Optima Aluminum Mount for Glock 10mm & 45 Cal. Pistols. Mounts for the Jpoint and Optima sights. Built by the same company that made the original TASCO Optima mounts. These are identical, aluminum mounts only they're brand new production and...

Jpoint-Optima Mount for S&W Revolvers. Mounts for the Jpoint and Optima sights. Built by the same company that made the original TASCO Optima mounts. These are identical, aluminum mounts only they're brand new production and fit Optima, Firepoint,...

Warne Maxima Scope Mounting Bases2-Piece and 1-Piece Steel Weaver Style Scope Bases  Warne Maxima Scope Mounting Bases are rigidly strong and perfectly aligned. They attached firmly with Torx screws, too. Specially made to fit Warne Maxima Rings,...

This JPoint adaptor converts the 135-TANSN mount to fit all other ACOG riflescopes. This item is only the bottom ring (see inset). Combine this with the 135-TANSN adaptor to mount your JPoint to Trijicon ACOG riflescope eyepieces. Proven in battle by our...

CMMG 5-Slot M-LOK Picatinny Rail- Mounts on M-LOK surfaces so you can attach Picatinny compatible accessories. Picatinny Compatible RailMounts to M-LOK Handguards, Forends, etc.5 - Slots for Accessories2.375 inches Long.

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...

TC Hot Shot Scope Mounting Base  Custom Weaver style Base for the Thompson Center Arms Hot Shot 22LR Mini Encore youth rifle. Fits any Weaver style scope mounting rings. Pictured above with a very reasonably priced Hawke Red Dot sight. Mount this...

Warne Browning Bar 1 pc Aluminum Base

Mark IV™, Mark III™ & 22/45™ Picatinny Rail Factory 1913 style picatinny rail for Mark IV™, Mark III™ and 22/45™. Rail fits firearms with factory pre-drilled receivers. Includes three screws. (Does not fit Mark I and Mark II™ pistols.) Genuine...

New Condition Used as Front base on:   Berreta Pintail ES 100 Slug Gun   Colt Sauer   Remington 700 & 78 L/A, 721, 725, 40X-L long actions, 700 & 78 S/A, 722, 40X-S, 725 Short Actions, 700ML, New Model 7 (4-holes), 673   Sauer...

8-40 Plug Screws Blue (Pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 8-40 thread Blue Plug Screws fit the  front sight holes...

6-48 Plug Screws Stainless (pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 6-48 thread Blue Plug Screws fit the most standard firearm...